Used Friedman IR-X Dual Channel Tube Preamp Guitar Effects Pedal

Mint, all original packaging, as new

All-Tube Preamp, IR Technology, Compact Size

The Friedman IR-X dual-channel tube preamp is an entire Friedman rig in a compact pedalboard-friendly package. Powered by two high-voltage 12AX7 preamp tubes, each channel delivers the harmonic richness and touch response of Dave Friedman's finest designs. DSP IR cabinet/power amp simulation sends a studio-quality mic'd-up tone to your DAW or Front-of-House. The IR-X provides easy-to-use controls without complex menus and 100-page manuals.

All-Tube Friedman Tone

IR-X isn't simulating a Friedman tube preamp. It is one. While many available preamp pedals utilize tubes to 'warm up' their digital or solid-state circuit, two glowing hot 12AX7 preamp tubes, running at the proper high voltage, are this pedal's beating heart. A genuine preamp in every way, IR-X delivers all the tone, response, gain characteristics, and harmonic complexity you expect from a Friedman design.

2 Independent Channels with Boost

IR-X boasts two fully independent foot-switchable channels. Like the famed Friedman flagship amps, channel one takes your tone from bluesy, British-voiced cleans to a muscular Plexi-style roar. Engage channel two for the Friedman signature higher-gain voice and all the percussive punch, note clarity and singing sustain that comes with it. Both channels feature their own independent and highly tweakable Boost circuits. This essentially gives you four channels, accessible with the tap of your toe.

Impulse Response Cabinet and Power Amp Simulation

All great tube amps need a great speaker cabinet, and whether sending your signal straight to the board or silently playing through the onboard headphone output, IR-X gives you a selection of Dave Friedman's favorite IRs. Select the IR per channel using the 3-way mini toggle switches or load your own quickly and easily via IR-X's editing software. You can even disengage the onboard IRs entirely to use IR-X's tube preamp with another IR loader.

12 Friedman Cabinet IRs Included

The IR-X software includes 12 free Friedman IRs to choose from. The first three are factory set to the hardware: the 6402 57 121 (Dave Friedman's favorite bare-wood 4x12 with 6402 Greenback speakers, captured with an SM57 and R-121); the V30 (stock Friedman 4x12 closed-back with four Celestion Vintage 30 speakers, captured with an SM57 and API preamp); and the 1980B V30 GB (a rare 80's UK 4x12 "Bass" cabinet with Greenback up top and V30's in the bottom for a huge tone).

Flexible Rig Integration

The IR-X's transparent effects loop allows you to easily integrate your favorite effects with everything from the most straightforward setups to the most complex digitally controlled rigs. Run your favorite dirt pedals and filters directly into the IR-X's input as you would with any amplifier, and place your favorite time-based effects in the effects loop. Use it as a standalone preamp into a live cabinet, or as an IR loader by plugging your preferred preamp into its effects loop return.

Expanded MIDI Control

IR-X is MIDI-capable. Whether pulling up presets with a pedalboard controller or switching channels with the laptop running your entire show, IR-X is ready for the job. Its included Friedman IR-X Editor software lets you tweak each channel's power amp simulation via the Thump and Presence controls, load your favorite IRs, activate the Boost Lock feature, select loop ON/OFF and save it all to 128 MIDI presets.

Features

• All-tube HIGH-VOLTAGE preamp / DI
• 2 x 12AX7 preamp tubes
• Two independent channels + boost (Channel 1 clean to gritty, Channel 2 high gain drive)
• MIDI programmable: channel select / boost, IR select, Thump and Presence, effects loop ON/OFF, Boost Lock
• Power amp simulation with software editable Presence and Thump (per channel)
• Low latency Impulse Response cabinet simulation (bypassable)
• Three position CAB/IR select switch per channel (programmable via software)
• 12 free Friedman IRs or load your own
• Boost Volume and Gain controls (per channel)
• Volume and Gain controls (per channel)
• Full EQ consisting of Bass, Middle, Treble (per channel)
• 3-way Bright switch (Channel 1), 2-way Tight switch (Channel 2)
• Three multi-function foot switches
• Ultra-transparent series FX loop (bypassable)
• TRS balanced output and headphone output
• MIDI 5 pin standard connector and USB MIDI
• USB software editor powered by SYNERGY
• Limited 3-year Warranty
• Universal 12V Power Supply and 6 foot USB2.0 cable included
• Dimensions (including knobs): 5.5" D x 6.5" W x 2.3" H; Weight: 1.5 lbs