New Electronic Audio Experiments Sending V2 Delay Guitar Effects Pedal White

From Electronic Audio Experiments:

Sending is an analog delay that melds the archaic voice of bucket brigade devices with a fully modern toolbox of digital control. It embraces the character and idiosyncrasies of the medium while delivering high quality sound and performance-friendly features worthy of the modern musician.

Using two MN3005 BBDs and comprehensive analog processing techniques, Sending can delay a sound up to a full second without clock noise, and it can be pushed to even longer times for compelling sonic degradation. At the input is a discrete preamplifier capable of subtle enhancement or warm saturation that melds perfectly with the delay line. A dual-mode feedback filter shapes the repeats into deep pulses or dub-style bright echoes. Its flexible LFO engine can modulate the delay time to create gentle movement or musical chaos. Conducting this analog ensemble is a 32-bit, 100MHz processor granting deep user control, preset functionality, and MIDI access to every parameter.

Sending is our love letter to the antiquated yet enduring technology of analog delay. As you explore its many shades of interplay between past and future, we hope you find it as immersive as we do.

Features
• A unique discrete preamplifier for subtle enhancement or full-range saturation that is automatically balanced for optimal output levels at all settings.
• Trails bypass mode that allows the preamp to be used as an always-on drive.
• Dual-mode Filter control that changes the tone of the delay repeats.
• Advanced analog filtering for low noise and high bandwidth on the delay line.
• Comprehensive digital control of every function using a powerful 32-bit processor system that seamlessly integrates with the analog signal path.
• Tap tempo with subdivisions and a hold mode for feedback swells.
• Delay time LFO engine with sine, square, and triangle waves plus a unique Chaos function that modulates the delay time using a truly random Lorenz attractor.
• Insert loop to apply external effects to delay repeats within the feedback path.
• Save and recall up to 32 presets: 3 via the front panel, the rest via MIDI.
• CV/Expression input that can be mapped to one or multiple controls.
• TRS MIDI input for control changes, preset selection, and clocking.
• Web-enabled firmware updates via the MIDI jack.

Controls
Each knob has a primary and secondary function. Access secondary functions by pressing Shift once. Press again to return the panel to normal.

-Time: delay time from <5ms to 1 second
(Div: tempo divisions)
-Color: adjusts preamp gain while keeping level consistent
(Trim: adjust volume up/down by 6dB)
-Mix: wet/dry blend
(Mix Mode: Sets Mix knob as a crossfader between wet/dry or as a delay level control only)
-Feedback: sets the number of repeats, from one repeat to self-oscillation
(Swell time: adjusts speed of feedback swell when Tap is held)
-Filter: cut lows or highs in the delay line
-Rate: LFO rate
(Chaos: LFO randomization)
-Depth: LFO intensity
(Shape: Set LFO waveform)
-Preset Select Buttons (I, II, III): long press to save a preset, short press to recall
-Engage Footswitch: turn effect on/off. Long press to change the bypass mode.
-Tap Footswitch: tap four times to set the delay time as a running average. Hold to enter Feedback Swell mode.

Specifications
Bypass switching: Electronic bypass with buffered or Trails modes. Trails mode passes signal through the preamplifier.
Input impedance @ 1kHz: 1MΩ
Output impedance @ 1kHz: <1KΩ
Power: 9VDC, 2.1mm center negative barrel (not included). Current draw is 350-380mA depending on the Time setting.
We recommend a regulated, isolated power supply rated for 400 mA minimum. The DC input is protected against reverse polarity and over-voltage up to 24V. Our pedals do not accept batteries.
All Electronic Audio Experiments pedals come with a warranty tied to the original owner.

Hardware Changelog
Version 2  (July 2023)
Complete circuit overhaul. Consider this the new starting point.

Version 1 (Summer 2018)
Original release; only 55 units built.
In many ways, this is a completely different product.

Firmware Changelog
V2 (November 2024)
-Revamped LFO engine w/ improved tapering, more natural V/Oct pitch movement, continuously variable Shape, clock sync mode, and arpeggio easter egg mode
-Modulation Matrix
-CV clocking mode
-Major updates to Swell mode: adjustable feedback, increased range of swell time, momentary activation in Trails mode, new Hold mode
-Improved clock accuracy
-Quality of life improvements including reduced LED brightness, parameter resets, and more
-Bug fixes:
Reduced feedback in trails mode to eliminate bleed
Fixed PC message behavior for preset loads. Now, sending a message twice reloads the preset instead of exiting to the live panel state.
Fixed a bug that prevents the bypass state from not saving correctly
Fixed a bug that resulted in occasional missed button presses.

V1 (July 2023)
Original release