New Darkglass Electronics Microtubes 900 V2 Euryale/Medusa Limited Edition Bass Amp Head

New, in box.

From Darkglass:

With enhanced durability, improved equalizer, studio-grade compression, impulse response cabinet emulation, and MIDI control, the Microtubes 900 v2 features all the options the modern, professional bassist needs in a compact, sleek, and loud format. This Limited Edition features Euryale (Medusa) artwork illustrated by artist Christopher Lovell.

Front Panel Features:

Input - Connect your instrument via a standard ¼" mono cable.
Passive/Active - Switch from passive to active mode. If your bass is active it can have a hotter signal, making the amp distort earlier.
Microtubes - Turns the Microtubes Engine on or off to add natural compression, organic harmonic enhancement, and saturation ranging from mild overdrive to high gain. The Microtubes Engine operates before the clean section.
Compression - Controls the amount of dynamic compression added to the Microtubes Engine. Make-up gain is adjusted automatically.
Drive - Controls the amount of distortion the Microtubes Engine delivers, from a soft warm overdrive to a massive modern distortion.
Tone - Controls the high harmonic content of the Microtubes Engine via a variable low pass filter.
Level - Controls the Microtubes Engine output volume.
Blend - Mixes between the clean signal and the distortion signal (Microtubes Engine).
B3K/VMT - Selects between two overdrive voicings: B3K is aggressive and percussive, VMT brings up the mids for a warmer, more neutral character.
Gain - Changes the volume of the signal before the Active 6 Band EQ.
Bass - ±12dB at 80Hz.
Mids - ±12dB at 250, 500, 1.5k and 3kHz.
Treble - ±12dB at 5kHz.
Master - Controls the overall volume of the amplifier.
Mute - Mutes the amplifier.

Dimensions: 26.7cm l x 7cm h x 25.5cm w (10.5"l x 2.75"h x 10"w) / Weight: 2.9kg (6.39lbs)

Back Panel Features:

Speaker Output - SpeakON combo jack for either SpeakON or ¼" speaker cable operation. Do not use an instrument cable with this jack.
Send / Return - Effects loop send and return; master volume control is after the return input.
Ground Lift - Lifts the ground of the DI XLR output to address ground noise.
DI Output - Sends your signal to a console, mic preamp, or interface. Both bypass and amp signal with cabinet simulation are available, switched from the cab select switch.
USB - Connect to the Darkglass Suite to load cabinet impulses or change parameters.
Headphone Output - Impulse-based cabinet emulation on headphones.
Aux In - Play music from a laptop, phone, or MP3 player, routed to the headphone output.
Cabinet Select - Navigate between the 3 cabinet impulses or the clean DI signal, defining both the XLR and headphone out signal.
Footswitch - The Intelligent Footswitch remotely engages and disengages the Microtubes Engine; hold to mute. Use a regular mono instrument cable to connect.
AC Socket - 100 – 230 VAC, 50-60Hz. Set the voltage selector to the correct position before turning on.
AC Power ON/OFF

Warning: No user-serviceable parts inside; do not open the amp. Do not use in high moisture environments or near liquids. The Microtubes 900v2 can deliver more than 115 dB and more than 900 watts – use proper hearing protection and ensure your cabinet can handle the power. Do not cover the vent holes. Do not use an instrument cable as a speaker cable.