{"product_id":"new-walrus-audio-harvest-series-canvas-stereo-dual-line-isolator-d-i-box","title":"New Walrus Audio Harvest Series Canvas Stereo Dual Line Isolator \u0026 D.I. Box","description":"\u003cp\u003eFrom Walrus Audio:\u003cbr\u003e\u003cbr\u003eCozy up to the limited batch of the Harvest Series! Our FULL Canvas Lineup has a new limited edition look, wrapped in a warm white enclosure and finished with new fonts and colors filled with cinnamon, spice, and everything nice.\u003cbr\u003e\u003cbr\u003eYou are the artist. Your sound is the paint, and this is your canvas. The Canvas Stereo is a Direct Box\/Line Isolator designed to remove any resistance between you and your audience by giving a pristine sonic foundation to build your masterpiece upon. From houses of worship to the dive bar downtown, Canvas Stereo is built to be the performance tool that goes wherever you are making your music.\u003cbr\u003e\u003cbr\u003eCanvas Stereo is a Passive Line Isolator (LI) and Direct Injection (DI) device that converts your unbalanced signals into balanced signals for interfacing properly with your recording interface or mixer at front-of-house. If you're using an amp-in-a-box (DSP Guitar Rig), like our ACS1, keyboards, or any other instrument utilizing both left and right outputs, then the Canvas Stereo is your new bridge to the front-of-house. The Canvas Series DIs pack everything you need from a DI\/LI into a standard pedal-sized enclosure designed to look great right on top of your board.\u003cbr\u003e\u003cbr\u003eCanvas Stereo Features:\u003cbr\u003e\u003cbr\u003eFlat frequency response from 20Hz-20kHz\u003cbr\u003eConverts ¼” unbalanced input to XLR balanced output.\u003cbr\u003eTransformer isolated output.\u003cbr\u003eSum XLR - Sums the Left and Right XLR outputs together, combining them to form a mono balanced signal if only one XLR input is available at the mixer\/interface. The Right XLR out will be disabled, and the combined signal will be on the Left XLR out.\u003cbr\u003eSum Thru switch - When engaged (in), Sum connects the left and right thru jacks together to combine the signals for running into a single amplifier (use either thru jack).\u003cbr\u003eXLR Phase flip - Flips the phase of the Right XLR output relative to the Left, fixing out-of-phase issues in stereo setups.\u003cbr\u003ePad: Enables a -15dB input pad (Only in D.I. mode) for reducing hot signals in order to minimize distortion.\u003cbr\u003eD.I.\/L.I.: Choose between Direct Injection or Line Isolator modes (Out for DI, In for LI)\u003cbr\u003eGND Lift: Isolates the GND pin on XLR to help reduce hum if present. Leave out for normal operation.\u003cbr\u003eCustom wound transformers for low THD (Total Harmonic Distortion) and full frequency response.\u003cbr\u003e\u003cbr\u003eDirect Injection:\u003cbr\u003eUse DI mode when connecting an unbalanced, high impedance source (Electric Guitar, Bass Guitar, etc). The signal will be reduced by -20dB (-35dB with pad engaged) and converted to a balanced signal via the transformer connected to the XLR output. Use the gain on your mixer or preamp to bring up to line level.\u003cbr\u003e\u003cbr\u003eLine Isolator:\u003cbr\u003eUse the LI when needing to connect your unbalanced, low impedance source (Amp + Cab Sim like the ACS1, keys, etc.). The signals will remain full volume and be converted to balanced signals via the transformer connected to the XLR output. Less preamp gain will be required in LI mode.\u003cbr\u003e\u003cbr\u003eDI or LI?\u003cbr\u003eWhen deciding between DI or LI, check with the manufacturer of your gear to find the output impedance of the device you are wanting to interface. For a general guide:\u003cbr\u003eHigh Impedance = anything above 1k = Use DI\u003cbr\u003eLow Impedance = less than 1k = Use LI\u003cbr\u003e\u003cbr\u003eSpecs:\u003cbr\u003eFlat frequency response from 20Hz-20kHz\u003cbr\u003eConverts ¼” unbalanced input to XLR balanced output.\u003cbr\u003eTransformer isolated output.\u003cbr\u003ePad: Enables a -15dB input pad (Only in D.I. mode) for reducing hot signals in order to minimize distortion.\u003cbr\u003eD.I.\/L.I.: Choose between Direct Injection or Line Isolator modes (Out for DI, In for LI)\u003cbr\u003eGND Lift: Isolates the GND pin on XLR to help reduce hum if present. Leave out for normal operation.\u003cbr\u003eCustom wound transformers for low THD (Total Harmonic Distortion) and full frequency response.\u003cbr\u003eThe die-cast enclosure's exact size is 4.77\" x 2.6\" x 1.64\".\u003cbr\u003eImpedance: DI - 10k input, 600 output; LI - 600 input, 600 output\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":47533104824498,"sku":"ACWALHVSTEREO","price":219.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/d1cf8ac3-0e68-4e0e-97ec-ab7aa9fe2979.jpg?v=1779971802","url":"https:\/\/www.citymusicannex.com\/products\/new-walrus-audio-harvest-series-canvas-stereo-dual-line-isolator-d-i-box","provider":"City Music Annex","version":"1.0","type":"link"}