{"product_id":"new-walrus-audio-harvest-series-canvas-mono-line-isolator-d-i-box","title":"New Walrus Audio Harvest Series Canvas Mono Line Isolator \u0026 D.I. Box","description":"\u003cp\u003eFrom Walrus Audio:\u003cbr\u003e\u003cbr\u003eCozy up to the limited batch of the Harvest Series! Our FULL Canvas Lineup has a new limited edition look, wrapped in a warm white enclosure and finished with new fonts and colors filled with cinnamon, spice, and everything nice.\u003cbr\u003e\u003cbr\u003eYou are the artist. Your sound is the paint, and this is your canvas. The Canvas Mono is a Direct Box\/Line Isolator designed to remove any resistance between you and your audience by giving a pristine sonic foundation to build your masterpiece upon. From houses of worship to the dive bar downtown, Canvas Mono is built to be the performance tool that goes wherever you are making your music.\u003cbr\u003e\u003cbr\u003eCanvas Mono is a Passive Line Isolator (LI) and Direct Injection (DI) device that converts your unbalanced signal into a balanced signal for interfacing properly with your recording interface or mixer at front-of-house. If you're using an amp-in-a-box (DSP Guitar Rig), like our ACS1, or running an acoustic or bass guitar direct, then the Canvas Mono is your new bridge to the front-of-house. The Canvas Mono packs everything you need from a DI\/LI into a standard pedal-sized enclosure designed to look great right on top of your board.\u003cbr\u003e\u003cbr\u003eCanvas Mono Features\u003cbr\u003eFlat frequency response from 20Hz-20kHz\u003cbr\u003eConverts ¼” unbalanced input to XLR balanced output.\u003cbr\u003eTransformer isolated output.\u003cbr\u003eSum switch turns the Thru channel into a second input when engaged, allowing stereo input signals to be summed to the XLR output.\u003cbr\u003ePad: Enables a -15dB input pad (Only in D.I. mode) for reducing hot signals in order to minimize distortion.\u003cbr\u003eD.I.\/L.I.: Choose between DI or LI (Out for DI, In for LI)\u003cbr\u003eGND Lift: Isolates the GND pin on XLR to help reduce hum if present. Leave out for normal operation.\u003cbr\u003eCustom wound transformers for low THD (Total Harmonic Distortion) and full frequency response.\u003cbr\u003e\u003cbr\u003eDirect Injection:\u003cbr\u003eUse DI mode when connecting an unbalanced, high impedance source (Electric Guitar, Bass Guitar, etc). The signal will be reduced by -20dB (-35dB with pad engaged) and converted to a balanced signal via the transformer connected to the XLR output. Use the gain on your mixer or preamp to bring the signal up to line level.\u003cbr\u003e\u003cbr\u003eLine Isolator:\u003cbr\u003eUse LI mode when connecting your unbalanced, low impedance source (Amp + Cab Sim like the ACS1, keys, etc.). The signal will remain full volume and be converted to a balanced signal via the transformer connected to the XLR output. Less preamp gain will be required in LI mode.\u003cbr\u003e\u003cbr\u003eDI or LI?\u003cbr\u003eWhen deciding between DI or LI, check with the manufacturer of your gear to find the output impedance of the device you are wanting to interface with. For a general guide:\u003cbr\u003eHigh Impedance = anything above 1k = Use DI\u003cbr\u003eLow Impedance = less than 1k = Use LI\u003cbr\u003e\u003cbr\u003eSpecs:\u003cbr\u003eFlat frequency response from 20Hz-20kHz\u003cbr\u003eConverts ¼” unbalanced input to XLR balanced output.\u003cbr\u003eTransformer isolated output.\u003cbr\u003eSum switch turns the Thru channel into a second input when engaged, allowing stereo input signals to be summed to the XLR output.\u003cbr\u003ePad: Enables a -15dB input pad (Only in D.I. mode) for reducing hot signals in order to minimize distortion.\u003cbr\u003eD.I.\/L.I.: Choose between DI or LI (Out for DI, In for LI)\u003cbr\u003eGND Lift: Isolates the GND pin on XLR to help reduce hum if present. Leave out for normal operation.\u003cbr\u003eCustom wound transformers for low THD (Total Harmonic Distortion) and full frequency response.\u003cbr\u003eThe die-cast enclosure's exact size is 4.77\" x 2.6\" x 1.64\".\u003cbr\u003eImpedance: DI - 10k input, 600 output; LI - 600 input, 600 output\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":47533104038066,"sku":"ACWALHVMONO","price":139.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/34bbb354-049c-45dd-a34e-18e2985bb503.jpg?v=1779971789","url":"https:\/\/www.citymusicannex.com\/products\/new-walrus-audio-harvest-series-canvas-mono-line-isolator-d-i-box","provider":"City Music Annex","version":"1.0","type":"link"}