New Darkglass Vintage Ultra V2 Bass Overdrive Pedal w/ Aux

Includes: two Fender Custom Shop Tweed 6" patch cables and a Fender Custom Shop Tweed 10' instrument cable.

The upgraded Vintage Ultra v2 features all the versatility and sonic possibilities of the first version plus: (1) Single user loadable cabinet simulation impulse response. (2) Micro-USB B port to connect to PC/Mac to load a different Virtual Cabinet through the Darkglass Suite. (3) 3.5mm headphone output with cabinet simulation. (4) Balanced XLR output with switchable cabinet simulation.

Now with an AUX input to practice along with your favorite songs

FEATURES:

Master: Whereas the Level knob controls the output of the overdrive section, the Master volume adjusts the overall volume of the unit. Ideal for fine tuning the output on clean mode. It also serves as a DI level control.

Blend: Mixes the clean input signal with the overdriven signal. The clean signal remains at unity gain while the volume of the overdriven signal is set by the Level knob, allowing for fine control of the blend ratio.

Level: Sets the volume of the overdriven signal.

Drive: Sets the amount of saturation in the overdriven signal.

Attack Switch: Sets the amount of treble content to saturate. The "Boost" setting emphasizes the treble content for extra clarity and presence. The "Flat" position leaves this register untouched while the "Cut" position reduces the amount of high frequencies being saturated.

Grunt Switch: Sets the amount of low frequency content to saturate by selecting between three different bass boost levels before the clipping stage.

EQ: Bass +/-12dB @ 100Hz; Lo Mids +/-12dB switchable 250Hz, 500Hz and 1kHz; Hi Mids +/-12dB switchable 750Hz, 1.5kHz and 3kHz; Treble +/-12dB @ 5kHz.

Direct Output: A balanced version of the 1/4" output, useful for running into PAs or studio mixing consoles.

Ground Lift: Disconnects the signal ground on the Direct Output to break any ground loops.

Cab Sim: Toggles the cabinet simulation on/off on the Direct Output.

Headphones: Internal stereo headphone amplifier capable of driving a minimum load of 16 ohms from the 3.5mm stereo jack.

USB: A Micro USB B connector allows you to connect the pedal to PC/Mac to load cabinet simulation impulse responses and control other settings.

Dimensions: 10.7 x 12 cm (4.21 x 4.72 in)

The Vintage Ultra v2 has a current draw of 110mA. Only use a regulated 9V DC adapter with a center-negative plug. It does not accept batteries.