{"title":"Walrus Audio 20% Off","description":"\u003cp\u003eBlack Friday pricing on new, in-stock Walrus Audio pedals and power supplies, through Dec 3.\u003c\/p\u003e","products":[{"product_id":"new-walrus-audio-eras-five-state-distortion-guitar-effects-pedal","title":"New Walrus Audio Eras Five-State Distortion Guitar Effects Pedal","description":"\u003cp\u003eEras is a no apologies, high-gain distortion that’s ready to chug, shred, and palm mute with tight response and multiple clipping options. Use the Blend knob at max for a full distortion onslaught or roll back the Blend knob to creatively stack and mix other dirt pedals placed in front of Eras. Great for bassists that want to blend in their dry signal as well. Anywhere you set it, the Eras is ready to deliver a diverse world of speaker ripping sounds.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe Eras features a five-position rotary knob that offers the following gain states:\u003c\/p\u003e\n\u003col start=\"1\" type=\"1\"\u003e\n\u003cli\u003eTight mode with a slight mid-cut, LED hard clipping, and internal volume control. Fastest response, great for palm muting.\u003c\/li\u003e\n\u003cli\u003eTight mode with a slight mid-cut and silicon hard clipping. Smooth with added compression.\u003c\/li\u003e\n\u003cli\u003eDual clipping mode with a slight mid-cut and both silicon and LED hard clipping. Rich \u0026amp; full with added sustain.\u003c\/li\u003e\n\u003cli\u003eRhythm mode with a deeper mid-cut, LED hard clipping, and internal volume control. Scooped mids, tight response.\u003c\/li\u003e\n\u003cli\u003eRhythm mode with a deeper mid-cut and silicon hard clipping. Rhythmic, warm and full.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cbr\u003eThink of each position as a different “flavor” of the pedal. Blend in dry signal or other pedals in combination with the gain states for a near-infinite amount of distortion sounds.\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":41137150918834,"sku":"ACWALERAS","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/products\/57_51397b4c-b9ab-4ee2-b4f5-07c55072be23.jpg?v=1633948695"},{"product_id":"new-walrus-audio-ages-five-state-overdrive-guitar-effects-pedal","title":"New Walrus Audio Ages Five-State Overdrive Guitar Effects Pedal","description":"\u003cp\u003eAges is an overdrive with innovative features that can stand on its own and stack well with other drives. From clean, sparkly and smooth gain to thick compressed overdrive.\u003c\/p\u003e\n\u003cp\u003eFor Ages, overdrive has been the one effect vital for so many. It’s used to charge through front lines of the mix and deliver a clear message that won’t soon be forgotten to its loyal listeners. Ages is a massively versatile overdrive machine standing at the ready for any amp and pickup combination that is thrown at it. An overdrive with innovative features that can stand on its own and stack well with other drives, Ages is ready to stand its ground and convey an unforgettable sound.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe five-position rotary knob offers the following gain states:\u003cbr\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eLow-gain mode with symmetric silicon soft clipping. Compressed and smooth.\u003c\/li\u003e\n\u003cli\u003eLow-gain mode with symmetric LED soft clipping. Pushed, open, and sparkly.\u003c\/li\u003e\n\u003cli\u003eHigh-gain mode with symmetric silicon soft clipping. Increased saturation and tight.\u003c\/li\u003e\n\u003cli\u003eHigh-gain mode with symmetric LED soft clipping. Saturated, punchy and big.\u003c\/li\u003e\n\u003cli\u003eHigh-gain mode with symmetric silicon hard clipping. Heavy compression, thick and chewy.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThink of each position as a different “flavor” of the pedal. Fine-tune each of these gain states with the dry knob for a near infinite supply of gain options. \u003cbr\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe Ages comes in an “olive green” enclosure with white, cream and black ink. Artwork features a mythical three trunked warrior elephant ready to charge in victorious battle.\u003c\/li\u003e\n\u003cli\u003ePower Requirements: 9V DC, center negative, 100mA min – 4.77 x 2.9 x 2.3 inches.\u003c\/li\u003e\n\u003cli\u003eThe use of an isolated power supply is recommended for powering all Walrus Audio Pedals.\u003c\/li\u003e\n\u003cli\u003eDaisy chain power supplies are not recommended. Power supply not included.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":41137453596850,"sku":"ACWALAGES","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/products\/57_53538872-d861-4b2d-a218-d46b43c01231.png?v=1633951628"},{"product_id":"new-walrus-audio-julianna-deluxe-chorus-vibrato-guitar-effects-pedal","title":"New Walrus Audio Julianna Deluxe Chorus\/Vibrato Guitar Effects Pedal","description":"\u003cp\u003eJulianna is an all analog, digital LFO, stereo chorus\/vibrato with new expanded features.\u003c\/p\u003e\n\u003cp\u003eBuilding off of the lush, tonal landscapes that the Julia Analog Chorus\/Vibrato created, Julianna is an all analog, digital LFO, stereo chorus\/vibrato with new expanded features. Julianna is able to produce mild smooth chorus, to seasick vibrato, to everywhere in between. Familiar controls like Lag, Dry-Chorus-Vibrato Blend, and selectable LFO wave shapes are all still here, but Julianna employs some new tricks: The Secondary LFO speed, modulation drift, tap\/expression control and momentary features will have you commanding all new kinds of sounds not found in traditional chorus pedals.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe Julianna contains all of the sounds and controls that the Julia has but adds these deluxe features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTap Tempo Control: Set the rate of the LFO with the Rate knob or the tap tempo switch.\u003cbr\u003e \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStereo In\/Out Jacks: Run mono in\/mono out, mono in\/stereo out, stereo in\/stereo out.\u003cbr\u003e \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMomentary Secondary LFO Speed: Ramp up or slow down to a second LFO rate. See manual for details.\u003cbr\u003e \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDrift Function: Gently speed up and slow down the LFO rate. Kinda like having a little robot inside your pedal moving the Rate knob up and down. See manual for details. You'll like this one.\u003cbr\u003e \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRandom LFO Shape: In addition to sine and triangle, Julianna adds a random wave shape option to modulate the pitch of your signal.\u003cbr\u003e \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTap Division: Select quarter note, quarter note triplet or eighth note multiplier to scale a tapped in tempo.\u003cbr\u003e \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eExpression Control: Control Depth, Rate or both with an expression pedal.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eExternal Tap In.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eUnlike most other chorus pedals, the Julianna and Julia have a special feature called Lag control. The Lag knob lets you set the center delay time that the LFO modulates. From smooth and tight modulation at lower settings, to a warbling detune at maximum, the Lag knob adds a new dimension to the traditional chorus\/vibrato landscape.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eD-C-V KNOB:\u003c\/p\u003e\n\u003cp\u003eThe DCV knob sets the ratio of dry to wet signal through the mono channel of the Julianna. Traditional mono chorus sounds can be heard with the knob set around noon. Pitch vibrato is found in the full clockwise position. The ground in between offers unique blends of chorus and vibrato not commonly found on other chorus pedals.\u003c\/p\u003e\n\u003cp\u003eWhen both outputs are connected, set the DCV knob to full counterclockwise to send your dry signal to the mono output and vibrato signal to the stereo output for a traditional stereo chorus sound. Explore other variations by turning the DCV knob up slightly to add some vibrato signal to the dry output changing the stereo image.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe Julianna comes in a deep lavender enclosure with surf green ink, featuring original artwork of Julia's big sister emerging from the depths that Julianna once ruled. Illustration by Adam Forster.\u003c\/li\u003e\n\u003cli\u003eExact size of the die-cast enclosure is 4.77” x 2.9” x 2.3”.\u003c\/li\u003e\n\u003cli\u003ePower Requirements: 9VDC (100mA minimum).\u003c\/li\u003e\n\u003cli\u003ePower supply not included.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":41137455071410,"sku":"ACWALJILIANNA","price":223.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/products\/57_7ac11295-c5c7-4ab3-aeb9-d34512198788.jpg?v=1633951638"},{"product_id":"new-walrus-audio-julia-analog-chorus-vibrato-v2-guitar-effects-pedal","title":"New Walrus Audio Julia Analog Chorus\/Vibrato V2 Guitar Effects Pedal","description":"\u003cp\u003eThe Julia is a fully analog, feature-rich chorus\/vibrato packed with a wide array of tonal landscapes begging to be explored. Updated for 2020, Julia now has top mounted jacks, soft switch bypassing and updated art from Adam Forster.\u003c\/p\u003e\n\u003cp\u003eJulia is able to produce mild smooth chorus, to seasick vibrato and everywhere in between. With controls like Lag, Dry-Chorus-Vibrato Blend, and selectable analog LFO wave shapes, you are able to dial in all types of classic and unique chorus\/vibrato sounds; some settings giving a familiar feel while others are not found on traditional chorus pedals.\u003c\/p\u003e\n\u003cp\u003eA special feature of the Julia is the Lag control. The Lag knob lets you set the center delay time that the LFO effect modulates from. From smooth and tight modulation at lower settings, to warbling detune at maximum, the Lag knob adds a new dimension to the traditional Chorus\/Vibrato landscape.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eD-C-V KNOB:\u003c\/p\u003e\n\u003cp\u003eWhile most chorus\/vibrato pedals offer a toggle to go between the two effects, we’ve provided a knob to blend between Dry, Chorus, into Vibrato (labeled d-c-v on the pedal). The Dry-Chorus-Vibrato Blend changes the ratio of dry to wet signal sent to the output. At minimum, you will hear no effect. Set it to noon for equal parts dry and wet – the traditional chorus setting. Set it to maximum for 100% wet – the traditional vibrato setting. Explore the ground between minimum and noon for adding slight amounts of movement to your dry signal (also making the Julia great on bass guitar). Explore the ground between noon and maximum for all sorts of unheard chorus\/vibrato combinations.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe Julia comes in a deep lavender colored enclosure with surf green ink, featuring original artwork of the water mystery, Julia revealing the tip of her hand telling more of her true story by Adam Forster.\u003c\/li\u003e\n\u003cli\u003eExact size of the diecast enclosure is 4.77” x 2.9” x 2.3”.\u003c\/li\u003e\n\u003cli\u003ePower Requirements: 9VDC (30mA minimum).\u003c\/li\u003e\n\u003cli\u003ePower supply not included.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":41137463460018,"sku":"ACWALJULIA","price":175.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/products\/57_2cf62437-5c6c-4973-a1b7-28cdd4a4e006.jpg?v=1633951724"},{"product_id":"new-walrus-audio-deep-six-v3-compressor-guitar-effects-pedal","title":"New Walrus Audio Deep Six V3 Compressor Guitar Pedal","description":"\u003cp\u003eThe Deep Six is a true bypass studio-grade compressor in stomp box form, inspired by the performance of the Universal Audio 1176 with the simplicity of the Ross and Dynacomp. Offering Level, Sustain, Attack, and Blend controls, the Deep Six gives you unmatched versatility at a price you can afford.\u003c\/p\u003e\n\u003cp\u003ePolarity will never be an issue as the Deep Six comes standard with a polarity correction circuit. The internal voltage is doubled to 18 volts giving you the maximum amount of headroom for your sound while maintaining a typical current draw of 8.9mA.\u003c\/p\u003e\n\u003cp\u003eThe Deep Six also offers Blend and Attack controls which allow you to use the pedal with active pickups or humbuckers. The blend feature lets you use high output instruments while truly being able to dial out any distortion that may be present.\u003c\/p\u003e\n\u003cp\u003eUpdates to the V3 are as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdded Tone knob (bass cut) for the ability to shape the low end of your guitar signal.\u003c\/li\u003e\n\u003cli\u003eSoft switch\/relay bypassing for smoother more reliable operation.\u003c\/li\u003e\n\u003cli\u003eMoved to top mounted in\/out jacks.\u003c\/li\u003e\n\u003cli\u003eUpdated art by Adam Forster that gives a humble nod to the original art that started it all.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e9V DC 8.9mA - 4.77 x 2.9 x 2.3 inches.\u003c\/li\u003e\n\u003cli\u003eThe use of an isolated power supply is recommended for powering all Walrus Audio pedals. Daisy chain power supplies are not recommended.\u003c\/li\u003e\n\u003cli\u003ePower supply not included.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":41137474437298,"sku":"ACWALDEEPSIX","price":175.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/products\/57_809a163e-743f-4c4b-9737-7b00d4e9fb78.jpg?v=1633951820"},{"product_id":"new-walrus-audio-arp-87-multi-function-delay-guitar-effects-pedal","title":"New Walrus Audio ARP-87 Multi-Function Delay Pedal","description":"\u003cp\u003eThe ARP-87 is a compact, feature-rich delay packed with a large palette of inspirational delay tones. Featuring four main algorithms (digital, analog, lo-fi, and slap back), the ARP-87 can cover some serious ground in the world of echoes.\u003c\/p\u003e\n\u003cp\u003eThe Digital algorithm boasts pristine, crystal clear repeats great for rhythmic riffs. The Analog setting works well to add warmth and dimension to chords and lines without getting in the way. The Lo-Fi algorithm, with its adjustable frequency range on the repeats, goes from warm, warped and murky to straight AM radio. Finally, the Slap setting makes it easy to dial in a great slap back echo perfect for chicken pickin' runs. With other features like smart bypass switching and momentary knob ramp, the ARP-87 provides endless creative opportunities waiting to be explored.\u003c\/p\u003e\n\u003cp\u003eThe X knob changes function depending on which algorithm you are using. In Digital, Analog, and Slap modes the knob controls modulation depth; in Lo-Fi mode it controls filter width. Note that changing delay types loads a whole new algorithm and the tempo must be tapped in again. Max delay time is 1000ms.\u003c\/p\u003e\n\u003cp\u003eTrails Mode:\u003c\/p\u003e\n\u003cp\u003eThe ARP-87 can be run in trails or no trails mode. In trails mode, when you turn the pedal off the delay trails die off naturally. In no trails mode, the delay trails are abruptly cut off. To toggle between modes, hold down the bypass switch for 1 second while applying power to the pedal. Unplug power and repeat to toggle to the other mode.\u003c\/p\u003e\n\u003cp\u003eMomentary Functions:\u003c\/p\u003e\n\u003cp\u003eWhen the switch is in the off position, press and hold the bypass switch to temporarily activate the effect for a moment of delay texture; releasing turns the effect off. When the effect is on, press and hold the bypass switch to momentarily ramp the X parameter to maximum, then release to return it to the knob location. Press and hold the tap switch to temporarily ramp the feedback to maximum, then release to return to the knob location.\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe ARP-87 comes in a Frosted Charcoal finish with cream and seafoam ink featuring original artwork by Chris Castro of a lone ship traveling through the ARP-87 Galaxies.\u003c\/li\u003e\n\u003cli\u003eDimensions: the die-cast enclosure's exact size is 4.77\" x 2.6\" x 1.39\".\u003c\/li\u003e\n\u003cli\u003ePower Requirements: 9VDC (100mA minimum).\u003c\/li\u003e\n\u003cli\u003eThe use of an isolated power supply is recommended for powering all Walrus Audio pedals. Daisy chain power supplies are not recommended.\u003c\/li\u003e\n\u003cli\u003ePower supply not included.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":41137477976242,"sku":"ACWALARP87","price":175.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/products\/57_b46ab4ea-7713-4ca7-945e-9ad8e21c97b4.jpg?v=1633951849"},{"product_id":"new-walrus-audio-slo-multi-texture-reverb-guitar-effects-pedal-slo","title":"New Walrus Audio Slö Multi Texture Reverb Guitar Effects Pedal","description":"\u003cp\u003eThe Slö Multi Texture Reverb allows players to create lush, modulated, sleepy and ambient soundscapes. Stocked with three different algorithms specifically designed to invoke textures for bringing dreams from your subconscious to reality.\u003c\/p\u003e\n\u003cp\u003eThe toggle switch allows three different reverb modes, Dark (Lower Octave), Rise (Ambient Swell) and Dream (Latching Pad), while secondary functions on the switch change between different wave shapes for the modulation on the reverb trail.\u003c\/p\u003e\n\u003cp\u003eCombine deep modulation with long washy trails and experience the Slö.\u003c\/p\u003e\n\u003cp\u003eALGORITHMS:\u003c\/p\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003eDARK – Add a lower octave to your reverb trail. Here you'll create deep and wide atmospheric sounds and channel nightmarish soundscapes. X knob sets the level of a -1 octave signal that feeds the reverb.\u003c\/div\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003eRISE – This is an auto-swell reverb for beautiful cinematic swells. Don't rush it. Let it breathe and gently wake up. X knob sets the amount of time it takes the reverb to swell in after a note is played. Set lower for shorter rise times and higher for longer rise times.\u003c\/div\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003eDREAM – Here is a lush reverb with a latching pad function. Press the sustain switch to latch signal. Experiment with the X knob to add vibrato over the pad. Press sustain again and pad will decrescendo according to where decay knob is set. X knob sets the depth of vibrato applied to the reverb trail.\u003c\/div\u003e\n\u003cp\u003eWAVE SHAPES:\u003c\/p\u003e\n\u003cp\u003eThe Slö also features 3 different wave shapes accessible by holding down bypass while switching the algorithm toggle:\u003c\/p\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003eSINE – Smooth and even pitch up and down modulation.\u003c\/div\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003eWARP – Asymmetric pitch up modulation similar to a warped record.\u003c\/div\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003eSINK – Asymmetric pitch down modulation for sinking detune similar to a Bigsby.\u003c\/div\u003e\n\u003cp\u003eMOMENTARY FUNCTIONS:\u003c\/p\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003eBYPASS – When the switch is in off position, press and hold to temporarily activate the effect to add a moment of reverb texture. Releasing the switch turns the effect off, and fades it out.\u003c\/div\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003eSUSTAIN – When pressed, the decay switch ramps up the reverb trail to maximum creating long dreamy reverb trail and then ramps back down to the decay knob setting when released. In the “Dream” algorithm, the sustain switch is latching. Press it once to capture and sustain the current reverb decay for extremely long pad-like sounds. Press it again to let the reverb trail taper off, based on the position of the decay knob.\u003c\/div\u003e\n\u003cp\u003eTRAILS MODE:\u003c\/p\u003e\n\u003cp\u003eThe Slö can run in trails or no trails mode. In trails mode, when you turn the pedal off, the reverb decay dies off naturally. In no trails mode, the decay is abruptly cut off when you turn the pedal off. To toggle between either mode, hold down the bypass switch for 1 second while applying power to the pedal. Unplug power and repeat to toggle to the other mode.\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe Slö comes in a Lollipop Blue finish with light blue and off white ink featuring original artwork by Christi Du Toit.\u003c\/li\u003e\n\u003cli\u003eThe diecast enclosure’s exact size is 4.77\" x 2.6\" x 1.39”.\u003c\/li\u003e\n\u003cli\u003ePower Requirements: 9VDC (100mA minimum).\u003c\/li\u003e\n\u003cli\u003eThe use of an isolated power supply is recommended for powering all Walrus Audio Pedals. Daisy chain power supplies are not recommended.\u003c\/li\u003e\n\u003cli\u003ePower supply not included.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":41137478500530,"sku":"ACWALSLO","price":175.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/products\/57_426ada4b-0a8c-4805-a00e-5e1266a6045b.png?v=1633951859"},{"product_id":"new-walrus-audio-polychrome-analog-flanger-guitar-effects-pedal","title":"New Walrus Audio Polychrome Analog Flanger Guitar Effects Pedal","description":"\u003cp\u003eLike the Iguana that’s malleable to its environment, blending into its surroundings for harmonious balance or standing out with vibrant confidence, the Polychrome Flanger is a uniquely colorful tool for adding modulated textures to songs.\u003c\/p\u003e\n\u003cp\u003eThe Polychrome is a true bypass, analog Flanger pulling in familiar layout controls from the Julia and Lillian. Dial in a wealth of colorful flange with the D-F-V (Dry, Flange, Vibrato) blend knob and the shape and voice switches.\u003c\/p\u003e\n\u003cp\u003eThe Shape Switch lets you select from sine, triangle, or random LFO wave to modulate the delay line.\u003c\/p\u003e\n\u003cp\u003eThe Voice Switch lets you select between two voices for the flanging effect. In the down position, the flanger is more traditional and full frequency. In the up position, you get a more complex and notched flange effect with less low end.\u003c\/p\u003e\n\u003cp\u003eLike the other members of the Walrus Audio modulation family, the Polychrome has a blend knob. The D-F-V (Dry, Flange, Vibrato) knob lets you blend the dry and delayed signal from full dry at minimum (no effect), to traditional flange at noon to full pitch vibrato at maximum. Don’t sleep on the vibrato sounds in the Polychrome. Set the D-F-V knob to maximum, feedback to a minimum, and the voice switch up for some unique pitch vibrato.\u003c\/p\u003e\n\u003cp\u003eTop-mounted input, output, and power jacks as well as soft switch relay bypassing make the Polychrome fit well on your board and ensure smooth operation for years to come.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe Polychrome comes in a flat black enclosure with purple, yellow, coral, green and white ink, featuring original artwork by David Hüttner.\u003c\/li\u003e\n\u003cli\u003eExact size of the die-cast enclosure is 4.77” x 2.9” x 2.3”.\u003c\/li\u003e\n\u003cli\u003ePower Requirements: 9VDC (50mA minimum).\u003c\/li\u003e\n\u003cli\u003ePower supply not included.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":41137644077234,"sku":"ACWALPOLYCHROME","price":175.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/products\/57_627e6c57-1030-40bf-891c-c5815eeb496d.jpg?v=1633953944"},{"product_id":"new-walrus-audio-canvas-power-22-dc-isolated-guitar-effects-pedal-power-supply","title":"New Walrus Audio Canvas Power 22 DC Isolated Guitar Effects Pedal Power Supply","description":"\u003cp\u003e\u003cstrong\u003eFrom Walrus Audio:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCanvas Power Supplies bring simplicity and modularity to powering your pedalboard. Delivering up to 500mA of silent, isolated, and clean 9V power to each output, these power supplies are perfect for the modern pedalboard. The Canvas Power series is built using modern switch mode supply architectures. This means each output is isolated, highly efficient, and heavily filtered ensuring they supply plenty of power with incredibly low noise.\u003c\/p\u003e\u003cp\u003eEach model is available for purchase as a standalone power supply or as a linkable unit to another supply via 24v power link, allowing Canvas Power to grow with your power needs without adding another cable you need to plug into the wall.\u003c\/p\u003e\u003cp\u003eThe super slim design allows Canvas Power Supplies to fit under nearly any pedalboard, and the included universal mounting brackets mean you don't have to worry about your power supply staying put when you're hustling to your next gig.\u003c\/p\u003e\u003cp\u003eThe onboard LED power meter lets you clearly see how much power consumption is remaining, and each output has its own LED indicator letting you know when it's sending power.\u003c\/p\u003e\u003cp\u003eWe've also developed custom 2.1mm barrel cables with a 90-degree plug on one end, and our all-new super short straight plug on the other, giving you the maximum flexibility for fitting these power supplies into tight spaces. Of course, they all accept standard 2.1mm barrel cables as well, but they won't be nearly as cool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCanvas Power 22 Details\u003c\/strong\u003e\u003cbr\u003eThe Canvas Power 22 has 22 isolated power outputs delivering up to 500mA of clean power at 9v. Two of the outlets are variable voltage, letting you switch between 9v, 12v, and 18v for powering high-voltage pedals. It also includes a USB-C port for powering devices like your phone or tablet while you play.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's in the Box?\u003c\/strong\u003e\u003cbr\u003e- 1 x Canvas Power Supply\u003cbr\u003e- 18\" straight to right angle DC Cable — Qty. 7\u003cbr\u003e- 36\" straight to right angle DC Cable — Qty. 15\u003cbr\u003e- 96W, 24V DC 4A power brick and country specific IEC cable\u003cbr\u003e- L style mounting bracket set\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":47533049282738,"sku":"ACWALCANVASP22","price":319.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/ea0mnkzxnknayqpna1dm.jpg?v=1779970366"},{"product_id":"new-walrus-audio-canvas-power-22-link-isolated-guitar-effects-pedal-power-supply","title":"New Walrus Audio Canvas Power 22 LINK Isolated Guitar Effects Pedal Power Supply","description":"\u003cp\u003e\u003cstrong\u003eNOTE: THIS IS THE LINK VERSION. IT CANNOT BE POWERED BY ITSELF AND DOES NOT INCLUDE A DC ADAPTER.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrom Walrus Audio:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCanvas Power Supplies bring simplicity and modularity to powering your pedalboard. Delivering up to 500mA of silent, isolated, and clean 9V power to each output, these power supplies are perfect for the modern pedalboard. The Canvas Power series is built using modern switch mode supply architectures. This means each output is isolated, highly efficient, and heavily filtered ensuring they supply plenty of power with incredibly low noise.\u003c\/p\u003e\u003cp\u003eEach model is available for purchase as a standalone power supply or as a linkable unit to another supply via 24v power link, allowing Canvas Power to grow with your power needs without adding another cable you need to plug into the wall.\u003c\/p\u003e\u003cp\u003eThe super slim design allows Canvas Power Supplies to fit under nearly any pedalboard, and the included universal mounting brackets mean you don't have to worry about your power supply staying put when you're hustling to your next gig.\u003c\/p\u003e\u003cp\u003eThe onboard LED power meter lets you clearly see how much power consumption is remaining, and each output has its own LED indicator letting you know when it's sending power.\u003c\/p\u003e\u003cp\u003eWe've also developed custom 2.1mm barrel cables with a 90-degree plug on one end, and our all-new super short straight plug on the other, giving you the maximum flexibility for fitting these power supplies into tight spaces. Of course, they all accept standard 2.1mm barrel cables as well, but they won't be nearly as cool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCanvas Power 22 Details\u003c\/strong\u003e\u003cbr\u003eThe Canvas Power 22 has 22 isolated power outputs delivering up to 500mA of clean power at 9v. Two of the outlets are variable voltage, letting you switch between 9v, 12v, and 18v for powering high-voltage pedals. It also includes a USB-C port for powering devices like your phone or tablet while you play.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's in the Box?\u003c\/strong\u003e\u003cbr\u003e- 1 x Canvas Power Supply\u003cbr\u003e- 18\" straight to right angle DC Cable — Qty. 7\u003cbr\u003e- 36\" straight to right angle DC Cable — Qty. 15\u003cbr\u003e- 12\" EIAJ Link cable\u003cbr\u003e- L style mounting bracket set\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":47533050691762,"sku":"ACWALCANVASP22L","price":295.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/uluvedmswkhhyas33f9l.jpg?v=1779970386"},{"product_id":"new-walrus-audio-monumental-black-harmonic-stereo-tremolo-guitar-effects-pedal","title":"New Walrus Audio Monumental Black Harmonic Stereo Tremolo Guitar Effects Pedal","description":"\u003cp\u003eThis item is new, in box.\u003c\/p\u003e\u003cp\u003eBuilding off the rich, warm, pulsating modulation of the Monument, the Monumental Harmonic Stereo Tremolo is an analog, optical tremolo bringing new controls, features, and width to the Walrus Audio line. New features available in the Monumental include the ability to save presets, blend between standard and harmonic tremolo modes, access to new wave shape and tap division options, and most importantly, a pan control to set the stereo spread of the tremolo to the right and left channels.\u003c\/p\u003e\u003cp\u003eNew Features\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTrue Stereo Input\/Output\u003c\/li\u003e\n\u003cli\u003eThe ability to save and recall three on-board presets, as well as a “live” mode\u003c\/li\u003e\n\u003cli\u003eFull expression control over every parameter\u003c\/li\u003e\n\u003cli\u003eAn additional wave shape and tap division\u003c\/li\u003e\n\u003cli\u003ePan control to allow the tremolo to sweep from left to right\u003c\/li\u003e\n\u003cli\u003eS-B-H to allow the user to blend from standard to harmonic tremolo modes\u003c\/li\u003e\n\u003cli\u003eThe ability to ramp up OR down (ramp location controlled via rate control) to achieve “Leslie” style ramp from your current rate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eInspired by the beautifully jagged, red-sand desert landscape of Monument Valley, the Monumental Tremolo is capable of blending between harmonic and standard tremolo to produce rich, luscious, warm pulsating modulation capable of peaks and valleys as smooth or as jagged as the real ones that our dear mother nature created long ago.\u003c\/p\u003e\u003cp\u003eWith different combinations of stereo panning, rate, division, and wave shapes, everything from traditional tremolo to inspiring unique waveforms will help you carve new paths that you won’t hear anywhere else.\u003c\/p\u003e\u003cp\u003eHarken back to vintage tones inspired by Fender Brownface amps in Harmonic mode. A low-pass and highpass version of your guitar signal is modulated opposite of each other, or 180º out of phase (high and low frequencies rise and fall opposite of each other). The result is a warm, almost “chewy” tremolo. Turn the S-B-H counterclockwise to give more bite to your tremolo pulse and tame the out-of-phase harmonics.\u003c\/p\u003e\u003cp\u003eControls\u003c\/p\u003e\u003cp\u003ePAN: Control the stereo spread of the left and right channels. Counterclockwise is your standard tremolo sound, the left and right channels have the same LFO. Turning the control clockwise will offset the phase of the right LFO to introduce stereo spread. Fully clockwise is maximum panning with the right channel LFO being 180 degrees out of phase from the Left LFO.\u003c\/p\u003e\u003cp\u003eS-B-H: Use this control to blend between standard and harmonic tremolo modes. In standard, all frequencies get affected at the same time. In harmonic, the high and low frequencies are offset from each other - When high is on, low is off and when high is off, low is on.\u003c\/p\u003e\u003cp\u003ePro Tip: Blending between standard and harmonic with the PAN knob turned up past 0 creates interesting polyrhythmic sounds.\u003c\/p\u003e\u003cp\u003ePRESET: The Monumental has three onboard presets with an additional live mode. Each preset can save and recall every parameter available on the pedal. Press both the bypass switch and tap tempo switch simultaneously to cycle through the available presets (Red, Green, Blue, with White being “live”).\u003c\/p\u003e\u003cp\u003eWhen you are on a preset and you change a parameter, the bypass LED will change color to purple, indicating a change has been made. You can then turn the control and the bypass LED will return to the preset color when the control is at the saved position. Once you have determined what sound you want saved for the preset, hold down both footswitches to save the preset (the bypass LED will return to the preset color).\u003c\/p\u003e\u003cp\u003eLive mode will always return to the current knob positions on the face of the pedal.\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":47533077758130,"sku":"ACWALMONUMENTALB","price":223.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/s09nlchly47xhqzeeye2.jpg?v=1779971164"},{"product_id":"new-walrus-audio-silt-black-harmonic-tube-fuzz-guitar-effects-pedal","title":"New Walrus Audio SILT Black Harmonic Tube Fuzz Guitar Effects Pedal","description":"\u003cp\u003eUnearth the Walrus Audio Silt Harmonic Fuzz, a collaborative creation with tube expert Jim Hagerman. Wielding an internal pre-amp tube, the Silt is a two-in-one fuzz that creates massively rich fuzz tones perfect for chords and rhythmic parts or with the press of a switch, adds uniquely harmonic overtones to the signal before hitting the tube. Crafted specifically for those seeking a harmonically rich fuzz experience, the Silt boasts an analog circuit with the distinctive warmth of a 12AU7 tube as its drive section, letting you explore a unique and wild sonic landscape.\u003cbr\u003e\u003cbr\u003e12AU7 Tube Drive: The Silt's 12AU7 tube section drives the warm, bone-rattling fuzz. We unearthed this sonic fossil to encase your sound in an amber warmth, while still providing the grit, growl, and harmonically complex textures that only a tube-driven fuzz can provide.\u003cbr\u003e\u003cbr\u003eHarmonic Mode acts as a frequency doubler before the drive section of the pedal. This produces crispy, octave-like sounds, lending a unique edge to your lead tones. Try this with your guitar tone knob rolled off.\u003cbr\u003e\u003cbr\u003eContour Control for Precision Tone Sculpting: Refine your fuzz tones with the precision of the Contour control to achieve a wide spectrum of timbres. Toggle between highpass, flat, and lowpass curves in the pre-tube EQ stage. Especially helpful when switching between different styles of pickups. Whether you're chasing searing leads or wooley rhythm, the Silt adapts to your style with roaring precision.\u003cbr\u003e\u003cbr\u003eDesigned for Operation at 9v-12v for Plenty of Gain: Operate the Silt anywhere between 9v and 12v. Running the pedal at 12v will give you an extra gain boost, letting you push the primal boundaries of fuzz to deliver the searing tones you've been searching for.\u003cbr\u003e\u003cbr\u003eTrue Bypass Circuit: Maintain the integrity of your original tone with the relay bypass circuit. When disengaged, the Silt ensures your signal remains pure, allowing your guitar's natural voice to shine through undisturbed.\u003cbr\u003e\u003cbr\u003eControls\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVolume: Control the output volume level of the pedal.\u003c\/li\u003e\n\u003cli\u003eTone: Sculpt your output tone with a lowpass\/highpass tilt tone control.\u003c\/li\u003e\n\u003cli\u003eGain: Control the input gain into the fuzz circuit, from subtle, distortion-like crunch to full-throttle fuzz.\u003c\/li\u003e\n\u003cli\u003eContour: Toggle between highpass, flat, and lowpass curves in the pre-tube EQ stage.\u003c\/li\u003e\n\u003cli\u003eBypass Switch: Enable or disable the effect with the relay bypass switch.\u003c\/li\u003e\n\u003cli\u003eHarmonic Switch: Activate or deactivate the frequency doubler circuit before the clipping stages.\u003c\/li\u003e\n\u003cli\u003eInput Jack: 1\/4\" cable input.\u003c\/li\u003e\n\u003cli\u003eOutput Jack: 1\/4\" cable output to your amplifier.\u003c\/li\u003e\n\u003cli\u003ePower Jack: Accepts 9v to 12v, Center Negative, with a minimum current of 300mA.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":47533096599730,"sku":"ACWALSILTBK","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/j7x3yljw2dkk8h38x77w.jpg?v=1779971628"},{"product_id":"new-walrus-audio-xero-polylooper-looper-guitar-effects-pedal-cream","title":"New Walrus Audio Xero Polylooper Looper Guitar Effects Pedal Cream","description":"\u003cp\u003eThe Xero Polylooper is a true bypass, dual-channel looping powerhouse with independent loop control on each channel, stereo panning, variable playback speed, reverse playback, three looping modes, and intuitive stomp gestures. The Xero is your new partner for perpetually endless ways to create new song ideas, practice your licks, or build endless textures on stage.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTwo Loop Channels, Fully Independent Control\u003c\/strong\u003e\u003cbr\u003eXero gives you two independent loop channels—each with its own:\u003cbr\u003eLoop up to 3 minutes with near infinite stacking of loops\u003cbr\u003eUnlimited overdubs\u003cbr\u003eVolume and Pan controls\u003cbr\u003ePlayback speed (0.5x \/ 1x \/ 2x)\u003cbr\u003eReverse playback option\u003cbr\u003eYou can loop on each channel individually or stack them together to build complex, layered compositions—all in real time.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePlay Naturally. Control Effortlessly.\u003c\/strong\u003e\u003cbr\u003eThe Xero's dual stomp switches keep loop control fast and intuitive:\u003cbr\u003eTap the left stomp switch to record and playback loops\u003cbr\u003eHold the left stomp to undo\u003cbr\u003eTap the right stomp switch to stop loop playback\u003cbr\u003eHold the right stomp for speed FX\u003cbr\u003eDouble-press both switches to toggle channel control\u003cbr\u003eDouble-hold to trigger full stop or full erase\u003cbr\u003eNeed even more control? Plug in an external dual-stomp switch to simultaneously take full command of both channels—perfect for live performers and loop-centric setups.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLooping Modes Built for Any Workflow\u003c\/strong\u003e\u003cbr\u003eSwitch between three flexible loop sync modes:\u003cbr\u003eSync Mode – Keeps all loops time-aligned to the first recorded loop\u003cbr\u003eUnsynced Mode – Let each channel record loops of completely independent lengths\u003cbr\u003ePoly Mode – Create polyrhythms using shared time divisions (3:4, 5:7, etc.) for interlocking textures (Supports MIDI clock for precision syncing)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eVisual Feedback That Keeps You Locked In\u003c\/strong\u003e\u003cbr\u003eEach channel has its own multicolor LED system showing recording, playback, speed effects, and channel control status.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpeed FX \u0026amp; Direction Controls\u003c\/strong\u003e\u003cbr\u003eActivate Speed FX to unlock Half \/ Normal \/ Double speed and Reverse playback. Each channel's playback behavior can be manipulated independently, letting you remix on the fly. FX activation syncs to loop start in Sync and Poly modes, ensuring accurate timing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBypass That Listens\u003c\/strong\u003e\u003cbr\u003eThe Xero features true relay bypass—when no loops are active, the pedal automatically disengages, keeping your tone completely untouched.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eStereo. MIDI. USB. Ready to Integrate.\u003c\/strong\u003e\u003cbr\u003e1\/8\" MIDI IN\/THRU (Type A) for clock sync and remote control\u003cbr\u003eUSB-C for easy firmware updates via walrusaudio.io\u003cbr\u003eStereo in\/out with full panning control on each channel\u003cbr\u003eCompatible with Chrome on Mac or Windows for web-based updates\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecs:\u003c\/strong\u003e\u003cbr\u003eTrue Relay Bypass\u003cbr\u003e9v 300mA Minimum\u003cbr\u003eCenter Negative, 2.1mm center pin, 5.5mm barrel (not included)\u003cbr\u003eExact size of the die-cast enclosure is 4.6\" x 3.9\" x 2.3\" including jacks.\u003cbr\u003eBuilt on Walrus Audio's MDSP digital processing platform\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":47533096894642,"sku":"ACWALXEROCR","price":239.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/goiffibegcpkrmtrux9m.jpg?v=1779971649"},{"product_id":"new-walrus-audio-silt-red-harmonic-tube-fuzz-guitar-effects-pedal","title":"New Walrus Audio SILT Red Harmonic Tube Fuzz Guitar Effects Pedal","description":"\u003cp\u003eUnearth the Walrus Audio Silt Harmonic Fuzz, a collaborative creation with tube expert Jim Hagerman. Wielding an internal pre-amp tube, the Silt is a two-in-one fuzz that creates massively rich fuzz tones perfect for chords and rhythmic parts or with the press of a switch, adds uniquely harmonic overtones to the signal before hitting the tube. Crafted specifically for those seeking a harmonically rich fuzz experience, the Silt boasts an analog circuit with the distinctive warmth of a 12AU7 tube as its drive section, letting you explore a unique and wild sonic landscape.\u003cbr\u003e\u003cbr\u003e12AU7 Tube Drive: The Silt's 12AU7 tube section drives the warm, bone-rattling fuzz. We unearthed this sonic fossil to encase your sound in an amber warmth, while still providing the grit, growl, and harmonically complex textures that only a tube-driven fuzz can provide.\u003cbr\u003e\u003cbr\u003eHarmonic Mode acts as a frequency doubler before the drive section of the pedal. This produces crispy, octave-like sounds, lending a unique edge to your lead tones. Try this with your guitar tone knob rolled off.\u003cbr\u003e\u003cbr\u003eContour Control for Precision Tone Sculpting: Refine your fuzz tones with the precision of the Contour control to achieve a wide spectrum of timbres. Toggle between highpass, flat, and lowpass curves in the pre-tube EQ stage. Especially helpful when switching between different styles of pickups. Whether you're chasing searing leads or wooley rhythm, the Silt adapts to your style with roaring precision.\u003cbr\u003e\u003cbr\u003eDesigned for Operation at 9v-12v for Plenty of Gain: Operate the Silt anywhere between 9v and 12v. Running the pedal at 12v will give you an extra gain boost, letting you push the primal boundaries of fuzz to deliver the searing tones you've been searching for.\u003cbr\u003e\u003cbr\u003eTrue Bypass Circuit: Maintain the integrity of your original tone with the relay bypass circuit. When disengaged, the Silt ensures your signal remains pure, allowing your guitar's natural voice to shine through undisturbed.\u003cbr\u003e\u003cbr\u003eControls\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVolume: Control the output volume level of the pedal.\u003c\/li\u003e\n\u003cli\u003eTone: Sculpt your output tone with a lowpass\/highpass tilt tone control.\u003c\/li\u003e\n\u003cli\u003eGain: Control the input gain into the fuzz circuit, from subtle, distortion-like crunch to full-throttle fuzz.\u003c\/li\u003e\n\u003cli\u003eContour: Toggle between highpass, flat, and lowpass curves in the pre-tube EQ stage.\u003c\/li\u003e\n\u003cli\u003eBypass Switch: Enable or disable the effect with the relay bypass switch.\u003c\/li\u003e\n\u003cli\u003eHarmonic Switch: Activate or deactivate the frequency doubler circuit before the clipping stages.\u003c\/li\u003e\n\u003cli\u003eInput Jack: 1\/4\" cable input.\u003c\/li\u003e\n\u003cli\u003eOutput Jack: 1\/4\" cable output to your amplifier.\u003c\/li\u003e\n\u003cli\u003ePower Jack: Accepts 9v to 12v, Center Negative, with a minimum current of 300mA.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":47533099581618,"sku":"ACWALSILTRD","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/afgkme1g4d7qawvuqwcl.jpg?v=1779971683"},{"product_id":"new-walrus-audio-iron-horse-lm308-v3-distortion-guitar-effects-pedal","title":"New Walrus Audio Iron Horse LM308 V3 Distortion Guitar Effects Pedal","description":"\u003cp\u003eThe Iron Horse is our take on a classic distortion circuit that's thick, punchy, riffy, and rowdy. With the help of the Si\/LED (Silicon\/LED) knob and wide range of the distortion knob, this true bypass, high-gain behemoth can be finely tuned for clear overdriven sounds or let the reigns loose for a full-on distorted onslaught.\u003cbr\u003e\u003cbr\u003eTop mount jacks with soft switch bypassing and art by David Hüttner complete the package for a pedal board-ready distortion machine.\u003cbr\u003e\u003cbr\u003eThe Iron Horse V3 updates are as follows:\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTop-mounted jacks\u003c\/li\u003e\n\u003cli\u003eSoft relay true bypass on\/off\u003c\/li\u003e\n\u003cli\u003eFixed volume drop-off when the distortion knob is at minimum\u003c\/li\u003e\n\u003cli\u003eRe-imagined the hard clipping toggle as a blend style potentiometer, that allows you to blend between symmetrical silicon and diode clipping for a new variety of tones.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOwners of the previous versions of the Iron Horse will be familiar with the three distortion modes operated by a toggle switch to change between different clipping modes. The switch has now been replaced with a blending knob opening up a wealth of ways to alter your tone.\u003cbr\u003e\u003cbr\u003eWhen the knob is set to the left, the distorted signal will be using Silicon clipping diodes adding in a high amount of compression. Rotating the knob to the right will bring in LED clipping and a smaller amount of compression. Putting the knob at noon will blend between the two using different ratios of the Silicone and LED clipping diodes for more complex clipping sounds.\u003cbr\u003e\u003cbr\u003eNote: Since the Si\/LED knob is changing the internal gain and clipping style, the other controls will behave slightly differently as well. You will need to use the volume knob to adjust the overall output up or down depending on where you have the knob set.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecs\u003c\/strong\u003e:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe Iron Horse V3 comes in a Gold finish with black ink. Artwork by illustrator David Hüttner features a new battle ready stallion cloaked in armor.\u003c\/li\u003e\n\u003cli\u003e9V DC 10mA – 4.77 x 2.9 x 2.3 inches.\u003c\/li\u003e\n\u003cli\u003eThe use of an isolated power supply is recommended for powering all Walrus Audio Pedals. Daisy chain power supplies are not recommended.\u003c\/li\u003e\n\u003cli\u003ePower supply not included.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":47533100073138,"sku":"ACWALIRONHORSEV3","price":175.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/txxhpgeueh87dpoo0na0.jpg?v=1779971699"},{"product_id":"new-walrus-audio-385-overdrive-mkii-yellow-guitar-effects-pedal","title":"New Walrus Audio 385 Overdrive MKII Yellow Guitar Effects Pedal","description":"\u003cp\u003eInspired by the rich tones of the Bell and Howell Filmosound 385 projector, the reimagined 385 MKII Overdrive offers dynamic, responsive, tube-like drive with simple but effective controls. The MKII adds an A\/B switch to toggle between two sets of volume and gain knobs that can be used like a preset to change volume and\/or gain for specific parts, as well as a 385+ switch that slams the front end of the circuit for added high-gain saturation.\u003cbr\u003e\u003cbr\u003eFor years, guitarists seeking pure tone have been taking the tube-powered audio sections of vintage film projectors and using them as guitar amps. We fell in love with the unique sound, and were inspired to capture it in a pedalboard-friendly box when we created the original 385 Overdrive pedal.\u003cbr\u003e\u003cbr\u003eThe 385 was developed to have the same simple but effective tone control as its grandfather. While the amp stacks bass and treble behind a single knob, our design separates them, allowing for a much wider array of tones to be achieved. The user is able to boost and cut bass and treble, allowing them to be creative with mid-frequency scoops and bumps.\u003cbr\u003e\u003cbr\u003eWhen we released the 385 Overdrive in 2016, it was quickly adopted by guitar players for the amp-like dynamics you could get at lower gain settings. Soon though, players found that cranking the gain produced a distortion-esque drive that was unique to the 385. To accommodate both setups in a single pedal, we added an A\/B switch along with a second set of Volume and Gain knobs that share a single set of tone controls.\u003cbr\u003e\u003cbr\u003eThe pedal is internally running at 18v, which helps us nail the same dynamic feel of the amp in a stomp box. This means it is extremely sensitive to how hard you dig in – just like the amp.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecs\u003c\/strong\u003e:\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTextured black enclosure with an illustration of an original 385 Filmosound projector by David Hüttner in yellow and red ink.\u003c\/li\u003e\n\u003cli\u003eThe die cast enclosure's exact size is 4.77\" x 2.6\" x 1.39\" including knobs.\u003c\/li\u003e\n\u003cli\u003ePower requirements are 9VDC (100mA minimum).\u003c\/li\u003e\n\u003cli\u003eThe use of an isolated power supply is recommended for powering all Walrus Audio Pedals.\u003c\/li\u003e\n\u003cli\u003eDaisy chain power supplies are not recommended. Power supply not included.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":47533100105906,"sku":"ACWAL385MKIIY","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/a2ys0pz8lya55thrgjjh.jpg?v=1779971710"},{"product_id":"new-walrus-audio-voyager-mkii-preamp-overdrive-guitar-effects-pedal-seafoam","title":"New Walrus Audio Voyager MKII Preamp Overdrive Guitar Effects Pedal Seafoam","description":"\u003cp\u003e\u003cb\u003e\u003cstrong\u003eColor: Seafoam\u003c\/strong\u003e\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eFrom Walrus Audio:\u003cbr\u003e\u003cbr\u003eThe Voyager MKII is a mid-focused overdrive\/preamp that contains all the mythical magic from the original Voyager and adds a wealth of features not seen before in a Klon-style pedal. From its lowest to highest settings, the Voyager provides a uniquely superb amount of clarity to any playing style.\u003cbr\u003e\u003cbr\u003eAt lower gain settings, it brightens the signal and adds clarity to each note. With the gain turned up, the Voyager transforms into a thick overdrive, providing depth to chorded playing while retaining the clarity needed to break through solos.\u003cbr\u003e\u003cbr\u003eThe Voyager MKII breaks out of the traditional Centaur three-knob topography by adding a foot-switchable parametric mid-frequency EQ with a boost\/cut range of +\/-12dB. The Freq (Frequency) knob then controls the center frequency of where the Mid knob is set, giving a range of 250Hz-2kHz. Great for accommodating any guitar and pickup combination and tailoring your tone to your own style of playing.\u003cbr\u003e\u003cbr\u003eFurther customize the Voyager's sound with the five-way rotary switch:\u003cbr\u003e1: Classic 1N34A Germanium Diodes (most compressed). This is the original Voyager sound.\u003cbr\u003e2: Classic 1N34A Germanium Diodes with bass boost (trust us).\u003cbr\u003e3: Symmetric Silicon Diodes (more open and dynamic).\u003cbr\u003e4: Asymmetric Silicon Diodes (least compressed, open \u0026amp; driven).\u003cbr\u003e5: Asymmetric Silicon Diodes with bass boost (least compressed, open \u0026amp; driven with a bass boost.)\u003cbr\u003e\u003cbr\u003eThink of each position as a different “flavor” of the pedal. Fine-tune each of these modes with the Mid\/Freq EQ for a near-infinite supply of gain options.\u003cbr\u003e\u003cbr\u003eSpecs:\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSeafoam with black ink with the Voyager satellite illustrated by the original Voyager artist, Nathan Price.\u003c\/li\u003e\n\u003cli\u003eInput: 1\/4\" TS, Unbalanced, 1M impedance, Output: 1\/4\" TS, Unbalanced, 100k impedance\u003c\/li\u003e\n\u003cli\u003eTrue Bypass\u003c\/li\u003e\n\u003cli\u003e9V DC, center negative, 100mA min – 2.62 x 4.77 x 2.25 inches including knobs.\u003c\/li\u003e\n\u003cli\u003eThe use of an isolated power supply is recommended for powering all Walrus Audio Pedals.\u003c\/li\u003e\n\u003cli\u003eDaisy chain power supplies are not recommended. Power supply not included.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":47533101908146,"sku":"ACWALVOYAGERMK2S","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/zdqy2pcomcx2gpvd4mae.jpg?v=1779971733"},{"product_id":"new-walrus-audio-voyager-mkii-preamp-overdrive-guitar-effects-pedal-black","title":"New Walrus Audio Voyager MKII Preamp Overdrive Guitar Effects Pedal Black","description":"\u003cp\u003e\u003cb\u003e\u003cstrong\u003eColor: Black\u003c\/strong\u003e\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eFrom Walrus Audio:\u003cbr\u003e\u003cbr\u003eThe Voyager MKII is a mid-focused overdrive\/preamp that contains all the mythical magic from the original Voyager and adds a wealth of features not seen before in a Klon-style pedal. From its lowest to highest settings, the Voyager provides a uniquely superb amount of clarity to any playing style.\u003cbr\u003e\u003cbr\u003eAt lower gain settings, it brightens the signal and adds clarity to each note. With the gain turned up, the Voyager transforms into a thick overdrive, providing depth to chorded playing while retaining the clarity needed to break through solos.\u003cbr\u003e\u003cbr\u003eThe Voyager MKII breaks out of the traditional Centaur three-knob topography by adding a foot-switchable parametric mid-frequency EQ with a boost\/cut range of +\/-12dB. The Freq (Frequency) knob then controls the center frequency of where the Mid knob is set, giving a range of 250Hz-2kHz. Great for accommodating any guitar and pickup combination and tailoring your tone to your own style of playing.\u003cbr\u003e\u003cbr\u003eFurther customize the Voyager's sound with the five-way rotary switch:\u003cbr\u003e1: Classic 1N34A Germanium Diodes (most compressed). This is the original Voyager sound.\u003cbr\u003e2: Classic 1N34A Germanium Diodes with bass boost (trust us).\u003cbr\u003e3: Symmetric Silicon Diodes (more open and dynamic).\u003cbr\u003e4: Asymmetric Silicon Diodes (least compressed, open \u0026amp; driven).\u003cbr\u003e5: Asymmetric Silicon Diodes with bass boost (least compressed, open \u0026amp; driven with a bass boost.)\u003cbr\u003e\u003cbr\u003eThink of each position as a different “flavor” of the pedal. Fine-tune each of these modes with the Mid\/Freq EQ for a near-infinite supply of gain options.\u003cbr\u003e\u003cbr\u003eSpecs:\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMatte black with cream ink with the space helmet illustrated by Christi Du Toit.\u003c\/li\u003e\n\u003cli\u003eInput: 1\/4\" TS, Unbalanced, 1M impedance, Output: 1\/4\" TS, Unbalanced, 100k impedance\u003c\/li\u003e\n\u003cli\u003eTrue Bypass\u003c\/li\u003e\n\u003cli\u003e9V DC, center negative, 100mA min – 2.62 x 4.77 x 2.25 inches including knobs.\u003c\/li\u003e\n\u003cli\u003eThe use of an isolated power supply is recommended for powering all Walrus Audio Pedals.\u003c\/li\u003e\n\u003cli\u003eDaisy chain power supplies are not recommended. Power supply not included.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":47533102530738,"sku":"ACWALVOYAGERMK2B","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/bgeyf4up0tbat9ifzxtm.jpg?v=1779971743"},{"product_id":"new-walrus-audio-xero-polylooper-looper-guitar-effects-pedal-black","title":"New Walrus Audio Xero Polylooper Looper Guitar Effects Pedal Black","description":"\u003cp\u003e\u003cb\u003e\u003cstrong\u003eColor: Black\u003c\/strong\u003e\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eFrom Walrus Audio:\u003cbr\u003e\u003cbr\u003eThe Xero Polylooper is a true bypass, dual-channel looping powerhouse with independent loop control on each channel, stereo panning, variable playback speed, reverse playback, three looping modes, and intuitive stomp gestures. The Xero is your new partner for perpetually endless ways to create new song ideas, practice your licks, or build endless textures on stage.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cstrong\u003eTwo Loop Channels, Fully Independent Control\u003c\/strong\u003e\u003c\/b\u003e\u003cbr\u003eXero gives you two independent loop channels—each with its own:\u003cbr\u003eLoop up to 3 minutes with near infinite stacking of loops\u003cbr\u003eUnlimited overdubs\u003cbr\u003eVolume and Pan controls\u003cbr\u003ePlayback speed (0.5x \/ 1x \/ 2x)\u003cbr\u003eReverse playback option\u003cbr\u003eYou can loop on each channel individually or stack them together to build complex, layered compositions—all in real time.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cstrong\u003ePlay Naturally. Control Effortlessly.\u003c\/strong\u003e\u003c\/b\u003e\u003cbr\u003eThe Xero's dual stomp switches keep loop control fast and intuitive:\u003cbr\u003eTap the left stomp switch to record and playback loops\u003cbr\u003eHold the left stomp to undo\u003cbr\u003eTap the right stomp switch to stop loop playback\u003cbr\u003eHold the right stomp for speed FX\u003cbr\u003eDouble-press both switches to toggle channel control\u003cbr\u003eDouble-hold to trigger full stop or full erase\u003cbr\u003eWith built-in gestures, you stay in control without menu-diving or complex tap dances. Need even more control? Plug in an external dual-stomp switch to simultaneously take full command of both channels—perfect for live performers and loop-centric setups.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cstrong\u003eLooping Modes Built for Any Workflow\u003c\/strong\u003e\u003c\/b\u003e\u003cbr\u003eSwitch between three flexible loop sync modes:\u003cbr\u003eSync Mode – Keeps all loops time-aligned to the first recorded loop\u003cbr\u003eUnsynced Mode – Let each channel record loops of completely independent lengths\u003cbr\u003ePoly Mode – Create polyrhythms using shared time divisions (3:4, 5:7, etc.) for interlocking textures (Supports MIDI clock for precision syncing)\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cstrong\u003eVisual Feedback That Keeps You Locked In\u003c\/strong\u003e\u003c\/b\u003e\u003cbr\u003eEach channel has its own multicolor LED system showing:\u003cbr\u003eRed, Green, and White for recording and playback controls\u003cbr\u003eCyan, Pink, Yellow, and Blue LEDs for different speed effects\u003cbr\u003eChannel Control Status via dedicated red LEDs\u003cbr\u003eInstantly know what's happening—no guesswork needed, even mid-performance.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cstrong\u003eSpeed FX \u0026amp; Direction Controls\u003c\/strong\u003e\u003c\/b\u003e\u003cbr\u003eWant to flip your loop upside down or twist it in time? Activate Speed FX to unlock:\u003cbr\u003eHalf \/ Normal \/ Double speed\u003cbr\u003eReverse playback - Each channel's playback behavior can be manipulated independently, letting you remix on the fly.\u003cbr\u003eFX activation syncs to loop start in Sync and Poly modes, ensuring accurate timing\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cstrong\u003eBypass That Listens\u003c\/strong\u003e\u003c\/b\u003e\u003cbr\u003eThe Xero features true relay bypass—when no loops are active, the pedal automatically disengages, keeping your tone completely untouched.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cstrong\u003eStereo. MIDI. USB. Ready to Integrate.\u003c\/strong\u003e\u003c\/b\u003e\u003cbr\u003e1\/8” MIDI IN\/THRU (Type A) for clock sync and remote control\u003cbr\u003eUSB-C for easy firmware updates via walrusaudio.io\u003cbr\u003eStereo in\/out with full panning control on each channel\u003cbr\u003eCompatible with Chrome on Mac or Windows for web-based updates\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cstrong\u003eSpecs:\u003c\/strong\u003e\u003c\/b\u003e\u003cbr\u003eTrue Relay Bypass\u003cbr\u003e9v 300mA Minimum\u003cbr\u003eCenter Negative, 2.1mm center pin, 5.5mm barrel (not included)\u003cbr\u003eExact size of the die-cast enclosure is 4.6” x 3.9” x 2.3” including jacks.\u003cbr\u003eInput impedance - 1.1M Ohms\u003cbr\u003eOutput impedance - 1k Ohms\u003cbr\u003eBuilt on Walrus Audio's MDSP digital processing platform\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":47533102989490,"sku":"ACWALXEROBK","price":239.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/diesqbia9r9hb99hzqer.jpg?v=1779971773"},{"product_id":"new-walrus-audio-melee-wall-of-noise-distortion-reverb-guitar-effects-pedal","title":"New Walrus Audio Melee: Wall of Noise Distortion \u0026 Reverb Guitar Effects Pedal","description":"\u003cp\u003eFrom Walrus Audio:\u003cbr\u003e\u003cbr\u003eWe give you the two most quintessential effects that yield unruly amounts of power and influence to an instrumentalist: reverb and distortion. They have been harnessed and woven together for an eternity of ethereal power with The Melee: Wall of Noise. The Melee unapologetically uses a joystick to meld reverb and distortion into one massive blaze of sound. With the flip of the order switch, run the distortion into the reverb or reverb into distortion; signal chain is your call now. For the explorer, the Melee can run one of three different reverb programs Ambient, Octave, and Reverse.\u003cbr\u003e\u003cbr\u003eIn a less is more approach, we've intentionally decided on controls that are fun to use and will inspire a wealth of creative output. Use the joystick to control the amount of distortion by moving it up and down. Moving the joystick left and right will adjust your reverb mix. The tone and decay toggles have low, medium, and high settings. Modulation can be added to the wet signal by holding down the bypass switch and moving the decay toggle. The left position is no modulation, the middle is a slight modulation, and the right is a high modulation.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cstrong\u003eALGORITHMS\u003c\/strong\u003e\u003c\/b\u003e\u003cbr\u003eThe Melee is equipped with three different reverb programs, which can be changed by simultaneously pressing the bypass and sustain stomp switches. Experiment with the order toggle switch to hear how differently these all react in front and after the distortion!\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAmbient Reverb (Pink LED) - Huge reverb capable of massive trails and engulfing your chords into an angry wash of sound. Great for soaring melodic lines or shoegaze-driven chord progressions.\u003c\/li\u003e\n\u003cli\u003eOctave Down Reverb (Yellow LED) - Similar to the Dark mode in the Slö, you'll find an eerie lower octave hovering in the reverb trail for a nice and dark atmospheric touch.\u003c\/li\u003e\n\u003cli\u003eReverse Reverb with Feedback (Blue LED) - Add reversed reverb trails back into your signal, create gentle melodies or push into reverse feedback overload. Big, slow, and sad chords love to hang out here.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e\u003cstrong\u003eMOMENTARY\u003c\/strong\u003e\u003c\/b\u003e\u003cbr\u003ePress and hold the sustain switch to ramp up the reverb trails. Release and the trails will ramp back down to where the decay switch is currently set. The sustain switch can also latch in all three programs. Press and release the Sustain switch to capture and sustain the current reverb decay for long pad-like sounds in your wet mix. Press again to release the latch, and the reverb trail will taper off based on the position of the decay knob.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cstrong\u003eSpecs:\u003c\/strong\u003e\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe Melee comes coated in a glossy neon pink enclosure with white, yellow, and green inks with art by David Hüttner.\u003c\/li\u003e\n\u003cli\u003eThe die-cast enclosure's exact size is 3.62\" x 4.79\" x 3.14\" (including joystick height).\u003c\/li\u003e\n\u003cli\u003eThree bypass modes, DSP, DSP+True, True Bypass\u003c\/li\u003e\n\u003cli\u003ePower requirements are 9VDC, center negative (200mA minimum).\u003c\/li\u003e\n\u003cli\u003eThe use of an isolated power supply is recommended for powering all Walrus Audio Pedals.\u003c\/li\u003e\n\u003cli\u003eDaisy chain power supplies are not recommended. Power supply not included.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":47533104857266,"sku":"ACWALMELEE","price":239.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/mqd3uix2yxlsrcytv5pa.jpg?v=1779971813"},{"product_id":"new-walrus-audio-fundamental-series-overdrive-guitar-effects-pedal","title":"New Walrus Audio Fundamental Series Overdrive Guitar Effects Pedal","description":"\u003cp\u003eFrom Walrus Audio:\u003cbr\u003e\u003cbr\u003eFor the Fundamental Series, we challenged ourselves to design a set of pedals with the tonal integrity that's required to live on a professional's pedalboard, but with simplified controls friendly enough for even the newest effect pedal users. Each Fundamental pedal has three faders for tweaking the sound and a three-way switch for changing pedal modes. The result is a line of pedals that will keep you covered from your first band practice all the way to a sold-out arena. Designed and assembled at Walrus Audio headquarters in OKC, OK.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cstrong\u003eFundamental Drive\u003c\/strong\u003e\u003c\/b\u003e\u003cbr\u003eThe Fundamental Drive is a versatile overdrive that allows for a wide range of tones thanks to its three-mode switch. This is the perfect tool at the front of your chain to set the tone for your whole rig.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cstrong\u003eGain\u003c\/strong\u003e\u003c\/b\u003e – The Gain slider sets the amount of gain applied to your guitar signal passing through the overdrive circuit.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cstrong\u003eTone\u003c\/strong\u003e\u003c\/b\u003e – The Tone slider controls the amount of high-frequency level reduction.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cstrong\u003eVolume\u003c\/strong\u003e\u003c\/b\u003e – The Volume slider sets the overall output volume of the pedal.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cstrong\u003eSlide Switch\u003c\/strong\u003e\u003c\/b\u003e – The slide switch allows you to change between three distinct flavors of the pedal. Each position has different clipping modes or tone profiles.\u003cbr\u003eSmooth - A classic soft-clipping silicon overdrive. Clean and smooth.\u003cbr\u003eCrunch - Silicon soft clipping with added hard clipping silicon diodes and a slight low-end boost. Crunchy and edgy.\u003cbr\u003eBright - Silicon soft and hard clipping from the Crunch mode with a pre-clipping low-end cut. Bright and glassy.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cstrong\u003eSpecs\u003c\/strong\u003e\u003c\/b\u003e:\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe Drive comes in a Black finish with red and off-white ink.\u003c\/li\u003e\n\u003cli\u003eThe diecast enclosure's exact size is 4.33\" x 2.16\" x 1.61\".\u003c\/li\u003e\n\u003cli\u003ePower requirements are 9VDC (100mA minimum).\u003c\/li\u003e\n\u003cli\u003eThe use of an isolated power supply is recommended for powering all Walrus Audio Pedals.\u003c\/li\u003e\n\u003cli\u003eDaisy chain power supplies are not recommended. Power supply not included.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":47533104922802,"sku":"ACWALFNOVERDRIVE","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/znqkhor1pwjehjoqy9fk.jpg?v=1779971822"},{"product_id":"new-walrus-audio-fundamental-series-distortion-guitar-effects-pedal","title":"New Walrus Audio Fundamental Series Distortion Guitar Effects Pedal","description":"\u003cp\u003eFrom Walrus Audio:\u003cbr\u003e\u003cbr\u003eFor the Fundamental Series, we challenged ourselves to design a set of pedals with the tonal integrity that's required to live on a professional's pedalboard, but with simplified controls friendly enough for even the newest effect pedal users. Each Fundamental pedal has three faders for tweaking the sound and a three-way switch for changing pedal modes. The result is a line of pedals that will keep you covered from your first band practice all the way to a sold-out arena. Designed and assembled at Walrus Audio headquarters in OKC, OK.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cstrong\u003eFundamental Distortion\u003c\/strong\u003e\u003c\/b\u003e\u003cbr\u003eThe Fundamental Distortion is a three-mode distortion. It covers a wide range of sounds from dark and doom through sharp cutting leads.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cstrong\u003eGain\u003c\/strong\u003e\u003c\/b\u003e – The Gain slider sets the amount of gain applied to your guitar signal passing through the distortion circuit.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cstrong\u003eTone\u003c\/strong\u003e\u003c\/b\u003e – The Tone slider controls the signal's frequency response after distortion. Left of center cuts highs and right of center boosts highs.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cstrong\u003eVolume\u003c\/strong\u003e\u003c\/b\u003e – The Volume slider sets the overall output volume of the pedal.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cstrong\u003eSlide Switch\u003c\/strong\u003e\u003c\/b\u003e – The slide switch allows you to change between three distinct flavors of the pedal. Each position has different clipping modes or tone profiles.\u003cbr\u003eDark - Asymmetric silicon clipping with an added high-frequency cut. Think dark and dynamic.\u003cbr\u003eSi - Classic silicon hard clipping diodes. Things get compressed and crunchy.\u003cbr\u003eLED - LED hard clipping diodes. A dynamic and crunchy sound.\u003cbr\u003eNote: The LED clipping mode will be louder due to the nature of the LEDs, so use your volume slider to compensate!\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cstrong\u003eSpecs\u003c\/strong\u003e\u003c\/b\u003e:\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe Distortion comes in a Black finish with yellow and off-white ink.\u003c\/li\u003e\n\u003cli\u003eThe diecast enclosure's exact size is 4.33\" x 2.16\" x 1.61\".\u003c\/li\u003e\n\u003cli\u003ePower requirements are 9VDC (100mA minimum).\u003c\/li\u003e\n\u003cli\u003eThe use of an isolated power supply is recommended for powering all Walrus Audio Pedals.\u003c\/li\u003e\n\u003cli\u003eDaisy chain power supplies are not recommended. Power supply not included.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":47533104988338,"sku":"ACWALFNDISTORTION","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/swisn1fp07ydyhtovvlw.jpg?v=1779971832"},{"product_id":"new-walrus-audio-fundamental-series-chorus-guitar-effects-pedal","title":"New Walrus Audio Fundamental Series Chorus Guitar Effects Pedal","description":"\u003cp\u003eFrom Walrus Audio:\u003cbr\u003e\u003cbr\u003eFor the Fundamental Series, we challenged ourselves to design a set of pedals with the tonal integrity that's required to live on a professional's pedalboard, but with simplified controls friendly enough for even the newest effect pedal users. Each Fundamental pedal has three faders for tweaking the sound and a three-way switch for changing pedal modes. The result is a line of pedals that will keep you covered from your first band practice all the way to a sold-out arena. Designed and assembled at Walrus Audio headquarters in OKC, OK. \u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cstrong\u003eFundamental Chorus\u003c\/strong\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe Fundamental Chorus is a digital emulation of a classic analog chorus, recreating bucket brigade modulation. With three types of chorus algorithms to select from, you can get sounds ranging from gentle modulation all the way to 80's tri-chorus.\u003cbr\u003e\u003cbr\u003eRate: Controls the rate of the modulated LFO. A higher rate will produce a faster and more pronounced pitch modulation, while a lower rate will produce a slower and more subtle effect.\u003cbr\u003e\u003cbr\u003eDepth: Controls the depth of the modulated LFO. This affects the amount of pitch modulation applied to the affected signal. \u003cbr\u003e\u003cbr\u003eMix:  Controls the mix of the affected signal and the original clean signal. All the way to the left outputs a fully clean signal, and all the way to the right outputs only the modulated signal. \u003cbr\u003e\u003cbr\u003eSlide Switch – The slide switch allows you to change between three different flavors of the pedal. \u003cbr\u003eLight – Emulates a traditional analog chorus with warm, lush, and organic tones.\u003cbr\u003eMedium – Adds multiple taps to further modulate a classic chorus.\u003cbr\u003eHeavy – Emulates a classic Eighties effect, the LCR tri-chorus, which is known for its rich and complex modulated sound.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cstrong\u003eSpecs\u003c\/strong\u003e\u003c\/b\u003e:\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe Chorus comes in a Black finish with purple and off-white ink.\u003c\/li\u003e\n\u003cli\u003eThe diecast enclosure's exact size is 4.33\" x 2.16\" x 1.61\".\u003c\/li\u003e\n\u003cli\u003ePower requirements are 9VDC (100mA minimum).\u003c\/li\u003e\n\u003cli\u003eThe use of an isolated power supply is recommended for powering all Walrus Audio Pedals.\u003c\/li\u003e\n\u003cli\u003eDaisy chain power supplies are not recommended. Power supply not included.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":47533105053874,"sku":"ACWALFNCHORUS","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/ylteh2dpntkvzjagvmgj.jpg?v=1779971841"},{"product_id":"new-walrus-audio-fundamental-series-phaser-guitar-effects-pedal","title":"New Walrus Audio Fundamental Series Phaser Guitar Effects Pedal","description":"\u003cp\u003eFrom Walrus Audio:\u003cbr\u003e\u003cbr\u003eFor the Fundamental Series, we challenged ourselves to design a set of pedals with the tonal integrity that's required to live on a professional's pedalboard, but with simplified controls friendly enough for even the newest effect pedal users. Each Fundamental pedal has three faders for tweaking the sound and a three-way switch for changing pedal modes. The result is a line of pedals that will keep you covered from your first band practice all the way to a sold-out arena. Designed and assembled at Walrus Audio headquarters in OKC, OK. \u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cstrong\u003eFundamental Phaser\u003c\/strong\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe Fundamental Phaser is a versatile digital emulation of a classic phaser. With three types of Phaser algorithms to select from, you can get sounds ranging from light tonal modulation to a highly modulated and resonant phaser.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cstrong\u003eRate\u003c\/strong\u003e\u003c\/b\u003e:  Controls the rate of the modulated LFO. A higher rate will produce a faster and more pronounced pitch modulation, while a lower rate will produce a slower and more subtle effect.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cstrong\u003eFeedback\u003c\/strong\u003e\u003c\/b\u003e: Control the amount of affected signal sent back into the feedback loop, more feedback creates more resonance. \u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/b\u003e: Controls the depth of the modulated LFO. This affects the amount of pitch modulation applied to the affected signal. \u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cstrong\u003eSlide Switch\u003c\/strong\u003e\u003c\/b\u003e – The slide switch allows you to change between three distinct flavors of the pedal. \u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLight – A scaled-back phaser that slightly modulates your signal.\u003c\/li\u003e\n\u003cli\u003eMedium – Emulates a classic warm analog phaser.\u003c\/li\u003e\n\u003cli\u003eHeavy – Multi-voiced phaser with lots of experimental sounds.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e\u003cstrong\u003eSpecs\u003c\/strong\u003e\u003c\/b\u003e:\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe Phaser comes in a Black finish with pink and off-white ink.\u003c\/li\u003e\n\u003cli\u003eThe diecast enclosure's exact size is 4.33\" x 2.16\" x 1.61\".\u003c\/li\u003e\n\u003cli\u003ePower requirements are 9VDC (100mA minimum).\u003c\/li\u003e\n\u003cli\u003eThe use of an isolated power supply is recommended for powering all Walrus Audio Pedals.\u003c\/li\u003e\n\u003cli\u003eDaisy chain power supplies are not recommended. Power supply not included.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":47533106626738,"sku":"ACWALFNPHASER","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/jcx8ara816rbclz8zzot.jpg?v=1779971850"},{"product_id":"new-walrus-audio-canvas-nano-line-isolator","title":"New Walrus Audio Canvas Nano Line Isolator","description":"\u003cp\u003eFrom Walrus Audio:\u003cbr\u003e\u003cbr\u003eYou are the artist. Your sound is the paint, and this is your canvas. The Canvas Nano Line Isolator is a Line Isolator (LI) in a compact form factor designed to be an ideal fit on a busy pedalboard or fly rig where space is limited, removing any resistance between you and your audience by giving a pristine sonic foundation to build your masterpiece upon. From houses of worship to the dive bar downtown, Canvas Nano LI is built to be the performance tool that goes wherever you are making your music.\u003cbr\u003e\u003cbr\u003eCanvas Nano Line Isolator is a Passive device that converts your unbalanced signal into a balanced signal for interfacing properly with your recording interface or mixer at front-of-house. If you're using an amp-in-a-box (DSP Guitar Rig), like our ACS1, or running an active acoustic or active bass guitar direct, then the Canvas LI is your new bridge to the front-of-house. The signal will remain at full volume and be converted to a balanced signal via the transformer connected to the XLR output. Less preamp gain will be required in LI mode. The Canvas LI packs everything you need from a LI into a compact-sized enclosure designed to look great right on top of your board.\u003cbr\u003e\u003cbr\u003eCanvas Nano LI Features\u003cbr\u003eCompact design perfect for tight pedal board layouts or small fly rigs.\u003cbr\u003eFlat frequency response from 20Hz-20kHz.\u003cbr\u003eConverts unbalanced input to XLR balanced output.\u003cbr\u003eTransformer isolated output.\u003cbr\u003eGND Lift: Isolates the GND pin on XLR to help reduce hum if present. Leave out for normal operation.\u003cbr\u003eCustom wound transformers for low THD (Total Harmonic Distortion) and full frequency response.\u003cbr\u003ePassive device, no power source required.\u003cbr\u003e\u003cbr\u003eDI or LI?\u003cbr\u003eNot sure if you need a DI or LI? When deciding between DI or LI, check with the manufacturer of your gear to find the output impedance of the device you want to interface with. For a general guide:\u003cbr\u003eHigh Impedance = anything above 1k = Use DI Low Impedance = less than 1k = Use LI\u003cbr\u003e\u003cbr\u003eSpecs:\u003cbr\u003eFlat frequency response from 20Hz-20kHz\u003cbr\u003eConverts ¼” unbalanced input to XLR balanced output.\u003cbr\u003eTransformer isolated output.\u003cbr\u003eThe Canvas comes in a lightly textured matte black enclosure with blue, light green, yellow, orange, red, and white ink.\u003cbr\u003eImpedance: LI - 600 input, 600 output\u003cbr\u003eDimensions (L × H × W): 95 mm × 34 mm × 43 mm \/ 3.74in x 1.33in x 1.69in\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":47533108166834,"sku":"ACWALCANVASNANOLI","price":95.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/mm5kfbgteblw3iksjdmp.jpg?v=1779971902"},{"product_id":"new-walrus-audio-canvas-power-usb-isolated-guitar-effects-pedal-power-supply","title":"New Walrus Audio Canvas Power USB Isolated Guitar Effects Pedal Power Supply","description":"\u003cp\u003e\u003cb\u003e\u003cstrong\u003e**Battery pack not included. When selecting a battery pack make sure it is a 30 Watt minimum PD (Power Delivery) battery.**\u003c\/strong\u003e\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eFrom Walrus Audio:\u003cbr\u003e\u003cbr\u003eThe Canvas Power USB allows your rig to be powered by most USB Power Delivery (PD) supplies like laptop chargers, high power phone chargers, and even 30 Watt minimum USB PD battery packs! With the Power USB, you can now take your rig to even more places. Got an outdoor festival this weekend and the dive bar with only one outlet for the whole band the next? Grab a USB PD battery pack and you've got a wireless rig! \u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cstrong\u003eBattery pack not included. When selecting a battery pack make sure it is a 30 Watt minimum PD (Power Delivery) battery.\u003c\/strong\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eHere's how it works:\u003cbr\u003e• Power USB works as a bridge that goes between your Canvas Power unit (or other power supplies with a 24V EIAJ input) and its power brick or USB battery pack.\u003cbr\u003e• Place the Power USB before your current power supply and connect them from the Power USB's 24V Thru to your main supply's 24V In with the included EIAJ cable. \u003cbr\u003e• Your pedals can now be powered by a USB PD supply such as an adapter (like the one connected to your MacBook), battery pack, OR your canvas power brick! \u003cbr\u003e• Power USB will prioritize the normal DC brick supply if present or use the USB PD input if no power brick input is detected.\u003cbr\u003e\u003cbr\u003ePower USB's included variable voltage 500mA output is great way to add an extra pedal power output to your rig, or have a handy single pedal power supply option on your desktop.\u003cbr\u003e\u003cbr\u003eCanvas Power Supplies bring simplicity and modularity to powering your pedalboard. The Power USB's variable voltage, 500mA output brings silent, isolated, and clean 9V (or 12\/18V*) power to your pedals. The Canvas Power series is built using modern switch-mode supply architectures. This means each output is isolated, highly efficient, and heavily filtered, ensuring they supply plenty of power with incredibly low noise.\u003cbr\u003e*With the voltage switch in the 12V setting, it will deliver up to 375mA. In the 18V setting, it will deliver up to 250mA.\u003cbr\u003e\u003cbr\u003eThe super slim design allows Canvas Power Supplies to fit under nearly any pedalboard, and the included universal mounting brackets mean you don't have to worry about your power supply staying put when you're hustling to your next gig.\u003cbr\u003e\u003cbr\u003eThe onboard LED power meter lets you clearly see how much power consumption is remaining, plus an LED indicator above the output jack letting you know when it's sending power.\u003cbr\u003e\u003cbr\u003eWe've also developed custom 2.1mm barrel cables with a 90-degree plug on one end, and our all-new super short straight plug on the other, giving you the maximum flexibility for fitting these power supplies into tight spaces. Of course, they all accept standard 2.1mm barrel cables as well, but they won't be nearly as cool.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cstrong\u003eWhat's in the Box?\u003c\/strong\u003e\u003c\/b\u003e\u003cbr\u003e-      1 x Canvas USB Power Supply\u003cbr\u003e-      18” Straight to right angle DC Cable – Qty. 1\u003cbr\u003e-      12” EIAJ Link Cable - Qty. 1\u003cbr\u003e-      3' USB-C to USB-C Cable - Qty. 1\u003cbr\u003e-      C style mounting bracket set w\/screws\u003cbr\u003e-      M3 Hex Key\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cstrong\u003eSpecs\u003c\/strong\u003e\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBattery pack not included. When selecting a battery pack make sure it is a PD (Power Delivery) battery.\u003c\/li\u003e\n\u003cli\u003eDimensions: 94mm x 54mm x 24.5mm (3.7in x 2in x 1in)\u003c\/li\u003e\n\u003cli\u003eWeight: 136g (.3lbs)\u003c\/li\u003e\n\u003cli\u003e1 - 9V, 12V or 18V variable output\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":47533109903538,"sku":"ACWALCANVASUSB","price":143.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/wplzqsg76rslzhch63x2.jpg?v=1779971933"},{"product_id":"new-walrus-audio-fundamental-series-tremolo-guitar-effects-pedal","title":"New Walrus Audio Fundamental Series Tremolo Guitar Effects Pedal","description":"\u003cp\u003eFrom Walrus Audio:\u003c\/p\u003e\u003cp\u003eFor the Fundamental Series, we challenged ourselves to design a set of pedals with the tonal integrity that's required to live on a professional's pedalboard, but with simplified controls friendly enough for even the newest effect pedal users. Each Fundamental pedal has three faders for tweaking the sound and a three-way switch for changing pedal modes. The result is a line of pedals that will keep you covered from your first band practice all the way to a sold-out arena. Designed and assembled at Walrus Audio headquarters in OKC, OK.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFundamental Tremolo\u003c\/strong\u003e\u003cbr\u003eThe Fundamental Tremolo is a classic optical tremolo, giving you that iconic chewy movement. With three wave shapes to select from, you can get sounds from smooth and soothing to glitchy, wild, and crazy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRate\u003c\/strong\u003e – The Rate slider sets how fast or slow the LFO is oscillating. A lower rate gives a gentle wavering texture, while a higher rate gives a shimmering and pulsating effect.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e – The Depth slider controls the strength of the tremolo effect. At a lower depth, the volume oscillations stay closer to the input for a more subtle movement. At a higher depth, the tremolo becomes more pronounced with the volume are greater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVolume\u003c\/strong\u003e – The Volume slider sets the overall output volume of the pedal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSlide Switch\u003c\/strong\u003e – The slide switch allows you to change between three distinct oscillator waveforms:\u003cbr\u003eSine: Sine gradually adds and decreases volume smoothly for an easy and subtle tremolo.\u003cbr\u003eSquare: Much more pronounced than sine, square wave has a more on-off pattern.\u003cbr\u003eRandom: Uses sample and hold that picks new random values at an interval set by the rate control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecs\u003c\/strong\u003e:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe Tremolo comes in a Black finish with orange and off-white ink.\u003c\/li\u003e\n\u003cli\u003eThe diecast enclosure's exact size is 4.33\" x 2.16\" x 1.61\".\u003c\/li\u003e\n\u003cli\u003ePower requirements are 9VDC (100mA minimum).\u003c\/li\u003e\n\u003cli\u003eThe use of an isolated power supply is recommended for powering all Walrus Audio Pedals.\u003c\/li\u003e\n\u003cli\u003eDaisy chain power supplies are not recommended. Power supply not included.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":47533110165682,"sku":"ACWALFNTREMOLO","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/qzxnieckbfcakbh4lncf.jpg?v=1779971942"},{"product_id":"new-walrus-audio-canvas-mono-line-isolator-d-i-box","title":"New Walrus Audio Canvas Mono Line Isolator \u0026 D.I. Box","description":"\u003cp\u003eFrom Walrus Audio:\u003c\/p\u003e\u003cp\u003eYou are the artist. Your sound is the paint, and this is your canvas. The Canvas Mono is a Direct Box\/Line Isolator designed to remove any resistance between you and your audience by giving a pristine sonic foundation to build your masterpiece upon. From houses of worship to the dive bar downtown, Canvas Mono is built to be the performance tool that goes wherever you are making your music.\u003c\/p\u003e\u003cp\u003eCanvas Mono is a Passive Line Isolator (LI) and Direct Injection (DI) device that converts your unbalanced signal into a balanced signal for interfacing properly with your recording interface or mixer at front-of-house. If you're using an amp-in-a-box (DSP Guitar Rig), like our ACS1, or running an acoustic or bass guitar direct, then the Canvas Mono is your new bridge to the front-of-house. The Canvas Mono packs everything you need from a DI\/LI into a standard pedal-sized enclosure designed to look great right on top of your board.\u003c\/p\u003e\u003cp\u003eCanvas Mono Features\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFlat frequency response from 20Hz-20kHz\u003c\/li\u003e\n\u003cli\u003eConverts ¼\" unbalanced input to XLR balanced output.\u003c\/li\u003e\n\u003cli\u003eTransformer isolated output.\u003c\/li\u003e\n\u003cli\u003eSum switch turns the Thru channel into a second input when engaged, allowing stereo input signals to be summed to the XLR output.\u003c\/li\u003e\n\u003cli\u003ePad: Enables a -15dB input pad (Only in D.I. mode) for reducing hot signals in order to minimize distortion.\u003c\/li\u003e\n\u003cli\u003eD.I.\/L.I.: Choose between DI or LI (Out for DI, In for LI)\u003c\/li\u003e\n\u003cli\u003eGND Lift: Isolates the GND pin on XLR to help reduce hum if present. Leave out for normal operation.\u003c\/li\u003e\n\u003cli\u003eCustom wound transformers for low THD (Total Harmonic Distortion) and full frequency response.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDirect Injection:\u003cbr\u003eUse DI mode when connecting an unbalanced, high impedance source (Electric Guitar, Bass Guitar, etc). The signal will be reduced by -20dB (-35dB with pad engaged) and converted to a balanced signal via the transformer connected to the XLR output. Use the gain on your mixer or preamp to bring the signal up to line level.\u003c\/p\u003e\u003cp\u003eLine Isolator:\u003cbr\u003eUse LI mode when connecting your unbalanced, low impedance source (Amp + Cab Sim like the ACS1, keys, etc.). The signal will remain full volume and be converted to a balanced signal via the transformer connected to the XLR output. Less preamp gain will be required in LI mode.\u003c\/p\u003e\u003cp\u003eDI or LI?\u003cbr\u003eWhen deciding between DI or LI, check with the manufacturer of your gear to find the output impedance of the device you are wanting to interface with. For a general guide:\u003cbr\u003eHigh Impedance = anything above 1k = Use DI\u003cbr\u003eLow Impedance = less than 1k = Use LI\u003c\/p\u003e\u003cp\u003eTroubleshooting:\u003cbr\u003eThis is a passive device, so you will not damage anything if connected improperly, but it could affect the signal level and frequency response if not connected properly. This is an easy thing to test since the LI\/DI switch is built into Canvas. If you lose high-frequency information when using LI mode, then you should probably be in DI mode.\u003c\/p\u003e\u003cp\u003eSpecs:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCustom wound transformers for low THD (Total Harmonic Distortion) and full frequency response.\u003c\/li\u003e\n\u003cli\u003eThe Canvas comes in a lightly textured matte black enclosure with blue, light green, yellow, orange, red and white ink displaying your painter's palette to begin creating your sonic brush strokes.\u003c\/li\u003e\n\u003cli\u003eThe die-cast enclosure's exact size is 4.77\" x 2.6\" x 1.39\".\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":47533112230066,"sku":"ACWALCANVAS","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/fwoilqzywdmdkwtyfgty.jpg?v=1779971986"},{"product_id":"new-walrus-audio-eons-five-state-fuzz-guitar-effects-pedal","title":"New Walrus Audio Eons Five-State Fuzz Guitar Effects Pedal","description":"\u003cp\u003eFrom Walrus Audio:\u003c\/p\u003e\u003cp\u003eFor Eons, man has thought the sound of thunder to be from the heavens above, echoing boastfully over us as we stay safe from its greatness. However, legend tells of a stoic and indomitable beast residing in the highest mountains seen and heard only by the most brash of travelers. With gnarled and twisted horns, this creature emits a sound thicker than Earth's crust to command attention and warn all who stand in his way. This is Eons.\u003c\/p\u003e\u003cp\u003eEons is a five-state fuzz capable of massively thick sounds ready to test the limits of any amp's grill cloth. Use the Voltage (lightning bolt) knob to crank up to 18 volts into the pedal's circuit for massive, open fuzz sounds, or choose to starve it down to 3 volts for spatty, gated fuzz. Experiment with the Voltage and Mode knobs for nearly endless styles of fuzz tones. Find vintage-inspired sounds emanating from the stages of Woodstock to chaotic three-chord punk rock. Eons is ready for a fight.\u003c\/p\u003e\u003cp\u003eThe Eons features a five-position rotary knob that offers the following clipping configurations. Think of them as different \"flavors\" of the pedal:\u003cbr\u003eI. Silicon clipping traditional fuzz that's well rounded with a huge sound; compressed and smooth.\u003cbr\u003eII. Silicon clipping with an added bass boost that boosts the low end at the beginning of the circuit; compressed and crunchy.\u003cbr\u003eIII. Germanium clipping with a feel of \"what if a distortion and fuzz had a kid?\"; crunchy and dynamic.\u003cbr\u003eIV. LED clipping diodes with a slight high-end cut; dynamically dark.\u003cbr\u003eV. Hard clipping silicon transistors combined with LED and Silicon soft clipping diodes. The rowdiest of the modes with tons of gain: compressed, loud, and angry.\u003c\/p\u003e\u003cp\u003eSpecs:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe Eons comes in a sandy tan enclosure color with red, cream and black ink. Artwork features a stoic four horned, Markhor goat illustrated by Adam Forster.\u003c\/li\u003e\n\u003cli\u003e9V DC, center negative, 100mA min – 2.62 x 4.77 x 2.25 inches including knobs.\u003c\/li\u003e\n\u003cli\u003eThe use of an isolated power supply is recommended for powering all Walrus Audio Pedals.\u003c\/li\u003e\n\u003cli\u003eDaisy chain power supplies are not recommended. Power supply not included.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":47533112557746,"sku":"ACWALEONS","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/smum26i1dvxeiwyxq89h.jpg?v=1779971997"},{"product_id":"new-walrus-audio-slг-er-stereo-ambient-reverb-blue-guitar-effects-pedal-sloer","title":"New Walrus Audio Slöer Stereo Ambient Reverb Blue Guitar Effects Pedal","description":"\u003cp\u003eFrom Walrus Audio:\u003c\/p\u003e\u003cp\u003eThe Slöer Stereo Ambient Reverb builds on our popular Slö lineup but adds two additional reverb algorithms, stereo width control, two additional modulation wave shapes, and the ability to control the sample rate. Now you can create immersive, lush, modulated, sleepy, and ambient soundscapes with more width and depth than ever before.\u003c\/p\u003e\u003cp\u003eSave your favorite dreamscapes with three onboard presets by simultaneously pressing and holding down on the bypass and sustain switches. Scroll through them by simultaneously pressing and releasing bypass and sustain.\u003c\/p\u003e\u003cp\u003eThe five-way rotary dial allows five different reverb modes - the three you know and love from the Slö: Dark (Lower Octave), Rise (Ambient Swell), and Dream (Latching Pad); and the addition of two new modes: Rain (Delay Tap Diffusion) and Light (High Octave Shimmer). Secondary functions on the dial change between five different wave shapes for modulation on the reverb trail.\u003c\/p\u003e\u003cp\u003eCombine deep modulation, long washy trails, and an immersive stereo field to experience Slöer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eALGORITHMS\u003c\/strong\u003e:\u003c\/p\u003e\u003cp\u003eDARK – Add a lower octave to your reverb trail. Here you'll create deep and wide atmospheric sounds and channel nightmarish soundscapes. X knob sets the level of a -1 octave signal that feeds the reverb.\u003c\/p\u003e\u003cp\u003eRISE – This is an auto-swell reverb for beautiful cinematic swells. Don't rush it. Let it breathe and gently wake up. X knob sets the amount of time it takes the reverb to swell in after a note is played. Set lower for shorter rise times and higher for longer rise times.\u003c\/p\u003e\u003cp\u003eDREAM – Lush reverb with a latching pad function. Press the sustain switch to latch signal. Experiment with the X knob to add vibrato over the pad. Press sustain again and the pad will decrescendo according to where the decay knob is set. X knob sets the depth of vibrato applied to the reverb trail.\u003c\/p\u003e\u003cp\u003eRAIN – Tappy and trippy, this program creates a unique effect with lower levels of diffusion allowing the reverb delay taps to audibly create an echo-like effect within your reverb. Use the X control to set the amount of diffusion of the delay taps.\u003c\/p\u003e\u003cp\u003eLIGHT – Bright and smooth reverb with an octave-up shimmer. Create a range of ethereal sounds with the X slider, keep it low for a smooth pad-like reverb or push it higher for a bright shimmer effect.\u003c\/p\u003e\u003cp\u003eThe Slöer also features five different wave shapes accessible by holding down bypass while switching the algorithm dial.\u003c\/p\u003e\u003cp\u003eSINE – Smooth and even pitch up and down modulation.\u003c\/p\u003e\u003cp\u003eWARP – Asymmetric pitch up modulation similar to a warped record.\u003c\/p\u003e\u003cp\u003eSINK – Asymmetric pitch down modulation for sinking detune similar to a Bigsby.\u003c\/p\u003e\u003cp\u003eSQUARE – Symmetric pitch up and down modulation for stepped modulation.\u003c\/p\u003e\u003cp\u003eRANDOM – Uses sample and hold that picks new random values.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMOMENTARY FUNCTIONS\u003c\/strong\u003e:\u003c\/p\u003e\u003cp\u003eBypass: When the switch is in the off position, press and hold to temporarily activate the effect to add a moment of reverb texture. Releasing the switch turns the effect off, and fades it out.\u003c\/p\u003e\u003cp\u003eSustain: When pressed, the decay switch ramps up the reverb trail to maximum creating a long dreamy reverb trail, and then ramps back down to the decay knob setting when released. In the “Dream” algorithm, the sustain switch is latching. Press it once to capture and sustain the current reverb decay for extremely long pad-like sounds. Press it again to let the reverb trail taper off, based on the position of the decay knob.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTRAILS MODE\u003c\/strong\u003e:\u003cbr\u003eThe Slöer can run in trails or no trails mode. In trails mode, when you turn the pedal off, the reverb decay dies off naturally. In no trails mode, the decay is abruptly cut off when you turn the pedal off. To toggle between either mode, hold down the bypass switch for 1 second while applying power to the pedal. Unplug power and repeat to toggle to the other mode.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePRESET SPILLOVER\u003c\/strong\u003e\u003cbr\u003eWhen scrolling through presets, there is only preset spillover if the next preset is the same algorithm as the one preceding it. For example, if your red and green presets are both in Dream mode, switching from red to green will not cut your reverb trails.\u003c\/p\u003e\u003cp\u003eSpecs:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe Slöer comes in a Lollipop Blue finish with light blue and off white ink featuring original artwork by Christi Du Toit.\u003c\/li\u003e\n\u003cli\u003eThe die-cast enclosure's exact size is 4.79\" x 3.62\" x 2.25\" including knobs.\u003c\/li\u003e\n\u003cli\u003ePower requirements are 9VDC (100mA minimum).\u003c\/li\u003e\n\u003cli\u003eThe use of an isolated power supply is recommended for powering all Walrus Audio Pedals. Daisy chain power supplies are not recommended.\u003c\/li\u003e\n\u003cli\u003ePower supply not included.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":47533112721586,"sku":"ACWALSLOERBLUE","price":279.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/fdexf5lfuzc3yhfzhxqu.jpg?v=1779972024"},{"product_id":"new-walrus-audio-melee-wall-of-noise-black-distortion-reverb-guitar-pedal","title":"New Walrus Audio Melee: Wall of Noise Black Distortion \u0026 Reverb Guitar Pedal","description":"\u003cp\u003eFrom Walrus Audio:\u003cbr\u003e\u003cbr\u003eWe give you the two most quintessential effects that yield unruly amounts of power and influence to an instrumentalist: reverb and distortion. They have been harnessed and woven together for an eternity of ethereal power with The Melee: Wall of Noise. The Melee unapologetically uses a joystick to meld reverb and distortion into one massive blaze of sound. With the flip of the order switch, run the distortion into the reverb or reverb into distortion; signal chain is your call now. For the explorer, the Melee can run one of three different reverb programs Ambient, Octave, and Reverse.\u003cbr\u003e\u003cbr\u003eIn a less is more approach, we've intentionally decided on controls that are fun to use and will inspire a wealth of creative output. Use the joystick to control the amount of distortion by moving it up and down. Moving the joystick left and right will adjust your reverb mix. The tone and decay toggles have low, medium, and high settings. Modulation can be added to the wet signal by holding down the bypass switch and moving the decay toggle. The left position is no modulation, the middle is a slight modulation, and the right is a high modulation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eALGORITHMS\u003c\/strong\u003e\u003cbr\u003eThe Melee is equipped with three different reverb programs, which can be changed by simultaneously pressing the bypass and sustain stomp switches. Experiment with the order toggle switch to hear how differently these all react in front and after the distortion!\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAmbient Reverb (Pink LED) - Huge reverb capable of massive trails and engulfing your chords into an angry wash of sound. Great for soaring melodic lines or shoegaze-driven chord progressions.\u003c\/li\u003e\n\u003cli\u003eOctave Down Reverb (Yellow LED) - Similar to the Dark mode in the Slö, you'll find an eerie lower octave hovering in the reverb trail for a nice and dark atmospheric touch.\u003c\/li\u003e\n\u003cli\u003eReverse Reverb with Feedback (Blue LED) - Add reversed reverb trails back into your signal, create gentle melodies or push into reverse feedback overload. Big, slow, and sad chords love to hang out here.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eMOMENTARY\u003c\/strong\u003e\u003cbr\u003ePress and hold the sustain switch to ramp up the reverb trails. Release and the trails will ramp back down to where the decay switch is currently set. The sustain switch can also latch in all three programs. Press and release the Sustain switch to capture and sustain the current reverb decay for long pad-like sounds in your wet mix. Press again to release the latch, and the reverb trail will taper off based on the position of the decay knob.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe die-cast enclosure's exact size is 3.62\" x 4.79\" x 3.14\" (including joystick height).\u003c\/li\u003e\n\u003cli\u003eThree bypass modes, DSP, DSP+True, True Bypass\u003c\/li\u003e\n\u003cli\u003ePower requirements are 9VDC, center negative (200mA minimum).\u003c\/li\u003e\n\u003cli\u003eThe use of an isolated power supply is recommended for powering all Walrus Audio Pedals.\u003c\/li\u003e\n\u003cli\u003eDaisy chain power supplies are not recommended. Power supply not included.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":47533114622130,"sku":"ACWALMELEEBK","price":239.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/ojm524hs44deauhsbipn.jpg?v=1779972050"},{"product_id":"new-walrus-audio-mako-series-mkii-acs1-amp-cab-simulator-guitar-effects-pedal","title":"New Walrus Audio MAKO Series MKII ACS1 Amp + Cab Simulator Guitar Effects Pedal","description":"\u003cp\u003eFrom Walrus Audio:\u003cbr\u003e\u003cbr\u003eThe ACS1 is an amplifier and speaker cab simulator delivering the sound and feel of world-class amplifiers, complimentary speaker cabinet IRs created by Tone Factor and York Audio, and controllable room size. With the ACS1, players have expansive options to deliver their tone on stage, in the studio, or practicing at home. Simple controls, stereo in and out, onboard presets, and MIDI support make the ACS1 an essential tool in a guitarist's arsenal. Players can also load in their own IRs and update firmware.\u003cbr\u003e\u003cbr\u003eThe ACS1 contains six amplifier models based on fan-favorite amps, each with its place in music history, and twelve cab IRs (Impulse Responses) designed by world-class designers to give you the best tonal representation possible. The stock IRs for the Fullerton, London, and Dartford amp models were custom-engineered by David Hislop and Kenyon Reed at Tone Factor, while the stock IRs for the Red, Citrus, and Tread amp models were designed by Justin York at York Audio.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAmplifiers\u003c\/strong\u003e\u003cbr\u003eThe ACS1 can mix and match stereo amp and cab combinations. When running the ACS1 in stereo, one amp can be used through both channels, or these combinations can be run independently left and right if you choose, leading to powerful, unique amp tones. Simply press down on the Middle encoder to choose individual settings for L, R, or L+R combined. Amps can be mixed and matched with no phase\/polarity issues as well.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThree Vintage Amp Models\u003c\/strong\u003e\u003cbr\u003eFullerton - Inspired by the classically bright and clear Fender Deluxe Reverb.\u003cbr\u003eLondon - Inspired by a 1962 Marshall Bluesbreaker with harmonically rich, valve-driven breakup.\u003cbr\u003eDartford - Inspired by the legendary jangly high-end tones from a 1960s Vox AC30.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThree High Gain Amp Models\u003c\/strong\u003e\u003cbr\u003eRed - Inspired by the distinctively raw and punchy Peavey 5150.\u003cbr\u003eCitrus - Inspired by the warm, rich Orange Rockerverb.\u003cbr\u003eTread - Inspired by the world-famous Mesa Boogie Dual Rectifier.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCabinet IRs\u003c\/strong\u003e\u003cbr\u003eThe ACS1 includes six IRs custom-engineered by David Hislop and Kenyon Reed at Tone Factor and six by Justin York of York Audio. Users can also load their own IRs via the customer web app.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRoom\u003c\/strong\u003e\u003cbr\u003eThe ACS1 has three reverb effects: Room (simulates the size of the room), Hall (large live sound space), and Spring (spring reverb tanks found in tube amps).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEQ, Noise Gate \u0026amp; Amp EQ\u003c\/strong\u003e\u003cbr\u003eBass, mid, and treble are adjustable on the home screen via the encoder knobs with clear visual feedback for L, R, and L+R channels. A noise gate can be applied and adjusted in the menu. Presence and resonance controls are available in Amp EQ Settings.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePresets\u003c\/strong\u003e\u003cbr\u003eSave up to three presets onboard. Cycle through the three onboard presets - red, green, and blue. Using MIDI, up to 128 presets can be saved and recalled.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecs\u003c\/strong\u003e\u003cbr\u003e-The ACS1 MKII comes in an anodized gold finish with black and green ink.\u003cbr\u003e-The 2in OLED screen measures 128x32 pixels.\u003cbr\u003e-The enclosure's exact size with knobs is 4.9\" x 2.52\" x 2.64\".\u003cbr\u003e-Power requirements are 9VDC (300mA minimum).\u003cbr\u003e-The use of an isolated power supply is recommended. Daisy chain power supplies are not recommended. Power supply not included.\u003cbr\u003e-24-bit 48kHz A\/D and D\/A converters for high quality audio.\u003cbr\u003e-32-Bit floating point processing.\u003cbr\u003e-Sharc \u0026amp; ARM co-processors.\u003cbr\u003e-Update firmware and load IR cabinets via web app\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":47533114785970,"sku":"ACWALMAKOMK2ACS1","price":319.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/aayapredof69tsxhlrls.jpg?v=1779972066"},{"product_id":"new-walrus-audio-mako-series-mkii-r1-high-fidelity-reverb-guitar-effects-pedal","title":"New Walrus Audio MAKO Series MKII R1 High-Fidelity Reverb Guitar Effects Pedal","description":"\u003cp\u003eFrom Walrus Audio:\u003cbr\u003e\u003cbr\u003eThe R1 MKII is an extremely powerful and versatile multi-function reverb that can go from intimate, small-room type subtle reverbs to huge, experimental euphoria. With six distinct programs based on fan-favorite reverb sounds that have been built from the ground up, players of all styles and genres will be able to find eternal inspiration with the R1.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNew Features\u003c\/strong\u003e\u003cbr\u003eAll six programs rebuilt and revamped for vast tonal improvement\u003cbr\u003eNew Ducking\/Swelling feature\u003cbr\u003eSize Control for each program\u003cbr\u003eDiffuse Control for each program\u003cbr\u003eFeedback EQ Control\u003cbr\u003e128 on-board presets accessible via the menu\u003cbr\u003eMenu screen for simple navigation and adjustments for secondary controls\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eProgram Controls\u003c\/strong\u003e\u003cbr\u003eEach program can be fully customized to your taste and playing style with the left encoder knob for features like modulation rate, ducking, and more. The R1 MKII includes a unique Ducking\/Swelling control that modifies the reverb's behavior. Higher settings increase the swelling effect, while lower settings enhance the ducking effect, helping to maintain a clear and focused mix. The Right encoder knob adjusts parameters like reverb EQ and room size.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePrograms\u003c\/strong\u003e\u003cbr\u003eSpring: Emulates an excited spring reverb commonly found in tube amps with loads of transducing drip. Easily go from subtle to full-on surf rock.\u003cbr\u003eHall: Provides the acoustics of large live sound spaces like concert halls to arenas. Longer decays result in a massive wash of ambiance.\u003cbr\u003ePlate: Emulates a smooth analog plate reverb with nice even diffusion for the classic plate sound.\u003cbr\u003eBFR: A big, hall-esque reverb with rich and lush decay in a vast cavern filled with choirs of angels.\u003cbr\u003eRefract: The RFRCT program allows for lovely, charming, and glitch-like textures hovering over a controllable amount of diffusion.\u003cbr\u003eAir: Offers a larger diffused reverb with a shimmer, as well as a distinct clarity to its decay. Adjust the shimmer control to lean into that high-octave sound.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePresets\u003c\/strong\u003e\u003cbr\u003eThe R1 can save up to 128 onboard presets, held in a preset bank accessible by tapping down on the bottom left and bottom middle knobs simultaneously. Presets 0-9 are divided into Banks A, B, and C. Presets 10-128 can be accessed through manual selection or MIDI.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecs\u003c\/strong\u003e\u003cbr\u003eThe R1 MKII comes in an anodized matte black finish with red, orange, cream, gold, green, purple and blue ink.\u003cbr\u003eThe 2in OLED screen measures 128x32 pixels.\u003cbr\u003eThe enclosure's exact size with knobs is 4.9\" x 2.52\" x 2.64\". Power requirements are 9VDC (300mA minimum).\u003cbr\u003eThe use of an isolated power supply is recommended for powering all Walrus Audio Pedals. Daisy chain power supplies are not recommended. Power supply not included.\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":47533114917042,"sku":"ACWALMAKOMK2R1","price":319.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/tlctmj2okgadarswpqnv.jpg?v=1779972082"},{"product_id":"new-walrus-audio-qi-etherealizer-multi-effects-guitar-pedal-black","title":"New Walrus Audio Qi Etherealizer Multi Effects Guitar Pedal Black","description":"\u003cp\u003e\u003cstrong\u003eColor: Black\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFrom Walrus Audio:\u003cbr\u003e\u003cbr\u003eThe Qi Etherealizer (pronounced “chee ethereal-izer”), a collaborative creation with Yvette Young, is a multi-effects pedal that combines Chorus, Delay, Granular effects, and, of course, Reverb, into a creative playground for atmospheric exploration.\u003cbr\u003e\u003cbr\u003eKnown for her innovative and explorative fingerstyle playing technique, love of guitar pedals, and leadership of the math rock band Covet, the Qi reflects her approach to creating lush, evolving soundscapes. Named after the vital life energy that flows through all living things, the Qi is designed to deliver rich textures, expansive atmospheres, and dynamic layers.\u003cbr\u003e\u003cbr\u003eThe Qi allows you to mix and match the chorus, delay, and grain and run in series or parallel to create your own inspiring universe of possibility in a stereo field. With the ability to save presets and bypass the chorus, delay, and grain controls, you can quickly and instantly change settings by simultaneously pressing the Bypass and Freeze stomp switches.\u003cbr\u003e\u003cbr\u003eThe Qi is the first creation to emerge from Walrus Audio's proprietary digital processing platform, MDSP. At the core of MDSP is the powerful ARM-based Cortex M7 processor. This unique system integrates a microcontroller and a DSP into a single compact unit, enabling a smaller, modular design. The MDSP platform also boasts a superior audio codec, supporting faster sample rates, increased bit depth, greater headroom, and an exceptional signal-to-noise ratio.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eGlobal Controls\u003c\/strong\u003e\u003cbr\u003eSpace Knob: Adds a charming reverb to your affected signal; modify the mix and decay from smaller room sounds to a huge, diffused ambient reverb.\u003cbr\u003eTone Knob: Controls the cutoff of a synth-style resonant low pass filter to shape the tone of the effect output.\u003cbr\u003eSeries and Parallel: In series, effects feed into each other (Chorus \u0026gt; Delay \u0026gt; Grain \u0026gt; Output). In parallel, all effect outputs are summed together. The Mix\/Dry parameter controls wet\/dry mix in series mode and dry level in parallel mode.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eGrain Controls\u003c\/strong\u003e\u003cbr\u003eGrain Cloud: Triggers small samples (grains) randomly from your playing for unpredictable, glitchy texture. The X knob controls the time between grains.\u003cbr\u003ePhrase Sample: Triggers grains rhythmically from your playing for a rhythmic and intentional effect.\u003cbr\u003eFive playback modes: x1 Normal, x2 Double-speed +1 octave, x.5 Half-speed -1 octave, REV Reverse, RNDM Randomized.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDelay Controls\u003c\/strong\u003e\u003cbr\u003eA full, clean digital delay offering repeats up to two seconds. Use time and feedback knobs; the TAP\/OSC switch controls tap tempo or oscillation. Three subdivisions: Quarter Note, Dotted Eighth Note, Eighth Note.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eChorus Controls\u003c\/strong\u003e\u003cbr\u003eTri Chorus: Lush, complex, modulated sounds combining three voices.\u003cbr\u003eStereo Chorus: Classic chorus with modulation offset 180 degrees to the right channel for stereo width.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eOther Features\u003c\/strong\u003e\u003cbr\u003eThree on-board presets (red, green, blue) plus a live mode (white).\u003cbr\u003eTRS MIDI 1\/8\" in and thru ports for MIDI control.\u003cbr\u003eUSB-C port included for future firmware updates.\u003cbr\u003eMomentary Grain Freeze and Momentary Grain + Max Reverb Freeze.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecs\u003c\/strong\u003e\u003cbr\u003eThe Qi Etherealizer comes in a matte black finish with cream ink.\u003cbr\u003e2x 1\/4\" Unbalanced Input Jacks (Stereo Left and Right)\u003cbr\u003e2x 1\/4\" Unbalanced Output Jacks (Stereo Left and Right)\u003cbr\u003eOutput Impedance - 220 Ohm\u003cbr\u003eFrequency Response - 20Hz to 20KHz\u003cbr\u003eDC (9v 300mA), Center Negative\u003cbr\u003eExact Size of the die-cast enclosure (with knobs) is 5.83\" x 4.87\" x 2.30\"\u003cbr\u003eThe use of an isolated power supply is recommended. Daisy chain power supplies are not recommended. Power supply not included.\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":47533116293298,"sku":"ACWALQIBK","price":359.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/kze8uemeug6xrr2vmbj4.jpg?v=1779972089"},{"product_id":"new-walrus-audio-qi-etherealizer-multi-effects-guitar-pedal-terracotta","title":"New Walrus Audio Qi Etherealizer Multi Effects Guitar Pedal Terracotta","description":"\u003cp\u003e\u003cstrong\u003eColor: Terracotta\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFrom Walrus Audio:\u003cbr\u003e\u003cbr\u003eThe Qi Etherealizer (pronounced “chee ethereal-izer”), a collaborative creation with Yvette Young, is a multi-effects pedal that combines Chorus, Delay, Granular effects, and, of course, Reverb, into a creative playground for atmospheric exploration.\u003cbr\u003e\u003cbr\u003eKnown for her innovative and explorative fingerstyle playing technique, love of guitar pedals, and leadership of the math rock band Covet, the Qi reflects her approach to creating lush, evolving soundscapes. Named after the vital life energy that flows through all living things, the Qi is designed to deliver rich textures, expansive atmospheres, and dynamic layers.\u003cbr\u003e\u003cbr\u003eThe Qi allows you to mix and match the chorus, delay, and grain and run in series or parallel to create your own inspiring universe of possibility in a stereo field. With the ability to save presets and bypass the chorus, delay, and grain controls, you can quickly and instantly change settings by simultaneously pressing the Bypass and Freeze stomp switches.\u003cbr\u003e\u003cbr\u003eThe Qi is the first creation to emerge from Walrus Audio's proprietary digital processing platform, MDSP. At the core of MDSP is the powerful ARM-based Cortex M7 processor. This unique system integrates a microcontroller and a DSP into a single compact unit, enabling a smaller, modular design. The MDSP platform also boasts a superior audio codec, supporting faster sample rates, increased bit depth, greater headroom, and an exceptional signal-to-noise ratio.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eGlobal Controls\u003c\/strong\u003e\u003cbr\u003eSpace Knob: Adds a charming reverb to your affected signal; modify the mix and decay from smaller room sounds to a huge, diffused ambient reverb.\u003cbr\u003eTone Knob: Controls the cutoff of a synth-style resonant low pass filter to shape the tone of the effect output.\u003cbr\u003eSeries and Parallel: In series, effects feed into each other (Chorus \u0026gt; Delay \u0026gt; Grain \u0026gt; Output). In parallel, all effect outputs are summed together. The Mix\/Dry parameter controls wet\/dry mix in series mode and dry level in parallel mode.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eGrain Controls\u003c\/strong\u003e\u003cbr\u003eGrain Cloud: Triggers small samples (grains) randomly from your playing for unpredictable, glitchy texture. The X knob controls the time between grains.\u003cbr\u003ePhrase Sample: Triggers grains rhythmically from your playing for a rhythmic and intentional effect.\u003cbr\u003eFive playback modes: x1 Normal, x2 Double-speed +1 octave, x.5 Half-speed -1 octave, REV Reverse, RNDM Randomized.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDelay Controls\u003c\/strong\u003e\u003cbr\u003eA full, clean digital delay offering repeats up to two seconds. Use time and feedback knobs; the TAP\/OSC switch controls tap tempo or oscillation. Three subdivisions: Quarter Note, Dotted Eighth Note, Eighth Note.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eChorus Controls\u003c\/strong\u003e\u003cbr\u003eTri Chorus: Lush, complex, modulated sounds combining three voices.\u003cbr\u003eStereo Chorus: Classic chorus with modulation offset 180 degrees to the right channel for stereo width.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eOther Features\u003c\/strong\u003e\u003cbr\u003eThree on-board presets (red, green, blue) plus a live mode (white).\u003cbr\u003eTRS MIDI 1\/8\" in and thru ports for MIDI control.\u003cbr\u003eUSB-C port included for future firmware updates.\u003cbr\u003eMomentary Grain Freeze and Momentary Grain + Max Reverb Freeze.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecs\u003c\/strong\u003e\u003cbr\u003eThe Qi Etherealizer comes in a Terracotta finish featuring original artwork by Yvette Young.\u003cbr\u003e2x 1\/4\" Unbalanced Input Jacks (Stereo Left and Right)\u003cbr\u003e2x 1\/4\" Unbalanced Output Jacks (Stereo Left and Right)\u003cbr\u003eOutput Impedance - 220 Ohm\u003cbr\u003eFrequency Response - 20Hz to 20KHz\u003cbr\u003eDC (9v 300mA), Center Negative\u003cbr\u003eExact Size of the die-cast enclosure (with knobs) is 5.83\" x 4.87\" x 2.30\"\u003cbr\u003eThe use of an isolated power supply is recommended. Daisy chain power supplies are not recommended. Power supply not included.\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":47533116555442,"sku":"ACWALQITC","price":359.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/j1ew6zzzc4ksb20lsigp.jpg?v=1779972096"},{"product_id":"new-walrus-audio-canvas-clock-midi-tempo-sync-guitar-pedal","title":"New Walrus Audio Canvas Clock MIDI Tempo Sync Guitar Pedal","description":"\u003cp\u003eFrom Walrus Audio:\u003cbr\u003e\u003cbr\u003eSync all your time-based devices, seamlessly move through preset setlists, and simplify tempo matching with the Canvas Clock! Designed for any kind of rig you throw at it and deeply customizable, users can put their full trust in the Clock to be an all-in-one tempo solution for their board.\u003cbr\u003e\u003cbr\u003eThe Canvas Clock can interface to any device in your rig that accepts clock signal, whether MIDI (via the 1\/8\" in or 5-pin MIDI ports) or analog (via the 1\/4\" in jacks). Clock will send time signals for both MIDI and analog devices, and will continue to do so as you move through your song list or manually adjust the tempo.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCustomize your Clock\u003c\/strong\u003e\u003cbr\u003eThe four 1\/4\" in jacks aren't just for sending tempo. They can each be assigned one of four functions:\u003cbr\u003e\u003cbr\u003eTempo Out - Connect to any pedal or device that accepts external tap inputs or analog time controls. Canvas Clock can send analog clock and MIDI clock at the same time.\u003cbr\u003eCV (Control Voltage) Out - Control any device that accepts CV. Good for Analog Synths, Drum Machines, or similar devices.\u003cbr\u003eSwitch Input - Each jack can be configured to receive input from two external footswitch controls.\u003cbr\u003eExpression In - Connect an expression pedal and use it to send a MIDI CC message out to a connected pedal.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFootswitches\u003c\/strong\u003e\u003cbr\u003eFootswitches for the Clock are customizable. Assign one of the onboard functions to the A and\/or B switches: Advance to the next song, Go back to the previous song, Advance to the next setlist, Go back to the previous setlist, Toggle the metronome start and stop, or Global tap tempo.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSync\u003c\/strong\u003e\u003cbr\u003eThe Sync jack found on top of the pedal can be set as an Input (great for accepting BPM from an external source) or Output (great for syncing external devices such as a Eurorack device or Roland Volca Synth).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMetronome\u003c\/strong\u003e\u003cbr\u003eIf active, the Clock metronome can be heard via the MET OUT port at the top of the pedal. This signal can be sent to a front of house console for live gigs or a monitor for practicing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSongs\u003c\/strong\u003e\u003cbr\u003eThere are 128 Song slots available. Each song is an editable preset where you can adjust the song name, meter, BPM, MIDI Macros, and metronome start or stop.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSetlists\u003c\/strong\u003e\u003cbr\u003eSongs can be grouped together and navigated through easily using the Setlist feature. Select songs from your master song list to curate and reorder for a gig or practice.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMIDI Macros\u003c\/strong\u003e\u003cbr\u003eMIDI Macros allow users to create one or a series of MIDI CC or PC messages that get sent out of the Canvas Clock when a specific song is recalled. Users have 128 adjustable Macros with 15 messages per MIDI Macro.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEditor\u003c\/strong\u003e\u003cbr\u003eConnect the pedal to a computer via the USB-C port and customize your Clock with the Canvas Clock Editor web-app. Firmware updates are also available there. Requires Chrome web browser on Windows or Mac OS.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003cbr\u003e9VDC, 300mA, Center-Negative, 2.1mm center pin OR powered via USB-C. The use of an isolated power supply is recommended. Daisy chain power supplies are not recommended. Power supply not included.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003cbr\u003e2.3\" x 2.96\" x 4.84\" including jacks \u0026amp; knobs\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHardware\u003c\/strong\u003e\u003cbr\u003ePreset\/Menu Encoder and Switch, Tempo\/Save Encoder and Switch, Footswitch A, Footswitch B, four 1\/4\" Jacks (TS or TRS), MIDI In\/Out (5-pin DIN), MIDI In\/Out (1\/8\" TRS), Sync (1\/8\" TRS), Met Out (1\/8\" TRS), USB-C\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":47533117046962,"sku":"ACWALCANVASCLOCK","price":239.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/szxq5x0h97gxesaklwlb.jpg?v=1779972110"},{"product_id":"new-walrus-audio-canvas-power-hp-plus-link-isolated-guitar-pedal-power-supply","title":"New Walrus Audio Canvas Power HP+ Plus LINK Isolated Guitar Pedal Power Supply","description":"\u003cp\u003e\u003cstrong\u003e**NOTE: THIS IS THE LINK VERSION! IT CANNOT BE POWERED BY ITSELF!**\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFrom Walrus Audio:\u003c\/p\u003e\u003cp\u003eThe Canvas Power HP Plus is a perfect power solution for hybrid rigs running pedals, modelers, and\/or multi-effect pedals allowing you to power the thirstiest of pedals with two, 3A (three Amp, or 3,000mA) outputs. The HP Plus also has 7 isolated power outputs delivering up to 500mA of clean power at 9V and a 9\/12\/18V variable output. The 3A outputs can switch between 9V and 12V to power high-voltage pedals.\u003cbr\u003e\u003cbr\u003eCanvas Power HP Plus brings simplicity and modularity to powering your modeler, multi-effect unit, or high-powered pedals. Boasting two ports delivering up to 3A each, and up to 500mA in seven ports of silent, isolated, and clean 9V power, the HP Plus is perfect for hybrid rigs using pedals and modelers like the Quad Cortex, HX Series, and many more. The Canvas Power series is built using modern switch mode supply architectures. This means each output is isolated, highly efficient, and heavily filtered ensuring they supply plenty of power with incredibly low noise.\u003cbr\u003e\u003cbr\u003eThe Power HP Plus is available for purchase as a standalone power supply or as a linkable unit to another supply via a 24V power link, allowing Canvas Power to grow with your power needs without adding another cable you need to plug into the wall.\u003cbr\u003e\u003cbr\u003eThe super slim 1.2 inch design allows Canvas Power Supplies to fit under nearly any pedalboard, and the included universal mounting brackets mean you don't have to worry about your power supply staying put when you're hustling to your next gig.\u003cbr\u003e\u003cbr\u003eThe onboard LED power meter lets you clearly see how much power is being consumed, and each output has its own LED indicator letting you know when it's sending power.\u003cbr\u003e\u003cbr\u003eWe've also developed custom 2.1mm barrel cables with a 90-degree plug on one end, and our all-new super short straight plug on the other, giving you the maximum flexibility for fitting these power supplies into tight spaces.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCanvas Power HP Plus Details\u003c\/strong\u003e\u003cbr\u003eThe Canvas Power HP Plus has 7 isolated power outputs delivering up to 500mA of clean power at 9v, and two 3A isolated outputs with selectable 9 or 12V. Assorted 2.1mm and 2.5mm reverse and standard polarity cables are also included.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat's in the Box?\u003c\/strong\u003e\u003cbr\u003e-1 x Canvas Power Supply\u003cbr\u003e-18\" Straight to right angle DC Cable - Qty. 5\u003cbr\u003e-36\" Straight to right angle DC Cable - Qty. 3\u003cbr\u003e-2.1mm Standard Polarity DC Cable (Yellow) - Qty. 2\u003cbr\u003e-2.1mm Reverse Polarity DC Cable (White) - Qty. 2\u003cbr\u003e-2.5mm Reverse Polarity DC Cable (Red) - Qty. 2\u003cbr\u003e-2.5mm Standard Polarity DC Cable (Blue) - Qty. 2\u003cbr\u003e-12\" EIAJ Link cable\u003cbr\u003e-L style mounting bracket set\u003cbr\u003e-M3 Hex Key\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecs\u003c\/strong\u003e\u003cbr\u003eDimensions: 312mm x 54mm x 25.5mm (12.28in x 2.12in x 1in)\u003cbr\u003eWeight: 426g (.93lbs)\u003cbr\u003e7 - 9VDC 500mA outputs\u003cbr\u003e1 - 9V, 12V or 18V variable outputs\u003cbr\u003e2 - 3A, 9V or 12V variable outputs\u003cbr\u003e1 - 5V 1.5A USB C charging output\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":47533117210802,"sku":"ACWALCANVASPHP+L","price":255.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/d1794f07-be96-4b73-b383-af074de886c3.jpg?v=1779972135"},{"product_id":"new-walrus-audio-canvas-stereo-dual-line-isolator-d-i-box-updated-version","title":"New Walrus Audio Canvas Stereo Dual Line Isolator \u0026 D.I. Box *Updated Version*","description":"\u003cp\u003eThis item is new, in box! A store receipt is included with your purchase.\u003c\/p\u003e\u003cp\u003eFrom Walrus Audio:\u003cbr\u003eYou are the artist. Your sound is the paint, and this is your canvas. Canvas Stereo is a Direct Box\/Line Isolator designed to remove any resistance between you and your audience by giving a pristine sonic foundation to build your masterpiece upon. From houses of worship to the dive bar downtown, Canvas Stereo is built to be the performance tool that goes wherever you are making your music.\u003c\/p\u003e\u003cp\u003eCanvas Stereo is a Passive Line Isolator (LI) and Direct Injection (DI) device that converts your unbalanced signals into balanced signals for interfacing properly with your recording interface or mixer at front-of-house. If you're using an amp-in-a-box (DSP Guitar Rig), like our ACS1, keyboards, or any other instrument utilizing both left and right outputs, then the Canvas Stereo is your new bridge to the front-of-house. The Canvas Series DIs pack everything you need from a DI\/LI into a standard pedal-sized enclosure designed to look great right on top of your board.\u003c\/p\u003e\u003cp\u003eNeeding a mono solution? Check out the Canvas Mono or Canvas Line Isolator Nano!\u003c\/p\u003e\u003cp\u003e\u003cu\u003e\u003cb\u003e\u003cstrong\u003eCanvas Stereo Features:\u003c\/strong\u003e\u003c\/b\u003e\u003c\/u\u003e\u003c\/p\u003e\u003cp\u003e• Flat frequency response from 20Hz-20kHz\u003c\/p\u003e\u003cp\u003e• Converts ¼” unbalanced input to XLR balanced output.\u003c\/p\u003e\u003cp\u003e• Transformer isolated output.\u003c\/p\u003e\u003cp\u003e• Sum XLR - Sums the Left and Right XLR outputs together, combining them to form a mono balanced signal if only one XLR input is available at the mixer\/interface. The Right XLR out will be disabled, and the combined signal will be on the Left XLR out.\u003c\/p\u003e\u003cp\u003e• Sum Thru switch - When engaged (in), Sum connects the left and right thru jacks together to combine the signals for running into a single amplifier (use either thru jack).\u003c\/p\u003e\u003cp\u003e• XLR Phase flip - Flips the phase of the Right XLR output relative to the Left, fixing out-of-phase issues in stereo setups.\u003c\/p\u003e\u003cp\u003e• Pad: Enables a -15dB input pad (Only in D.I. mode) for reducing hot signals in order to minimize distortion.\u003c\/p\u003e\u003cp\u003e• D.I.\/L.I.: Choose between Direct Injection or Line Isolator modes (Out for DI, In for LI)\u003c\/p\u003e\u003cp\u003e• GND Lift: Isolates the GND pin on XLR to help reduce hum if present. Leave out for normal operation.\u003c\/p\u003e\u003cp\u003e• Custom wound transformers for low THD (Total Harmonic Distortion) and full frequency response.\u003c\/p\u003e\u003cp\u003e\u003cb\u003e\u003cstrong\u003eDirect Injection: \u003c\/strong\u003e\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eUse DI mode when connecting an unbalanced, high impedance source (Electric Guitar, Bass Guitar, etc). The signal will be reduced by -20dB (-35dB with pad engaged) and converted to a balanced signal via the transformer connected to the XLR output. Use the gain on your mixer or preamp to bring up to line level.\u003c\/p\u003e\u003cp\u003e\u003cb\u003e\u003cstrong\u003eLine Isolator: \u003c\/strong\u003e\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eUse the LI when needing to connect your unbalanced, low impedance source (Amp + Cab Sim like the ACS1, keys, etc.). The signals will remain full volume and be converted to balanced signals via the transformer connected to the XLR output. Less preamp gain will be required in LI mode.\u003c\/p\u003e\u003cp\u003e\u003cb\u003e\u003cstrong\u003eDI or LI?\u003c\/strong\u003e\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eWhen deciding between DI or LI, check with the manufacturer of your gear to find the output impedance of the device you are wanting to interface.\u003c\/p\u003e\u003cp\u003e\u003cb\u003e\u003cstrong\u003eFor a general guide:\u003c\/strong\u003e\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e• High Impedance = anything above 1k = Use DI\u003c\/p\u003e\u003cp\u003e• Low Impedance = less than 1k = Use LI\u003c\/p\u003e\u003cp\u003e\u003cb\u003e\u003cstrong\u003eTroubleshooting:\u003c\/strong\u003e\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis is a passive device, so you will not damage anything if connected improperly, but it could affect the signal level and frequency response if not connected properly. This is an easy thing to test since the LI\/DI switch is built into Canvas Stereo. If you lose high-frequency information when using LI mode, then you should probably be in DI mode.\u003c\/p\u003e\u003cp\u003e\u003cb\u003e\u003cstrong\u003eSpecs\u003c\/strong\u003e\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e• Flat frequency response from 20Hz-20kHz.\u003c\/p\u003e\u003cp\u003e• Selectable Line Isolator or Direct Injection.\u003c\/p\u003e\u003cp\u003e• Custom wound transformers for low THD (Total Harmonic Distortion) and full frequency response.\u003c\/p\u003e\u003cp\u003e• Pad: -15dB attenuation in DI mode.\u003c\/p\u003e\u003cp\u003e• Canvas Stereo comes in a lightly textured matte black enclosure with blue, light green, yellow, orange, red and white ink.\u003c\/p\u003e\u003cp\u003e• The die-cast enclosure's exact size is 4.77\" x 2.6\" x 1.64\".\u003c\/p\u003e\u003cp\u003e• Impedance: DI - 10k input, 600 output; LI - 600 input, 600 output\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":47533119832242,"sku":"ACWALCANVASST","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/lh6ahx056vckdhbo1oa0.jpg?v=1779972211"},{"product_id":"new-walrus-audio-fundamental-series-delay-guitar-effects-pedal","title":"New Walrus Audio Fundamental Series Delay Guitar Effects Pedal","description":"\u003cp\u003eThis item is new, in box! A store receipt is included with your purchase.\u003c\/p\u003e\u003cp\u003eFrom Walrus Audio:\u003cbr\u003e\u003cbr\u003eFor the Fundamental Series, we challenged ourselves to design a set of pedals with the tonal integrity that's required to live on a professional's pedalboard, but with simplified controls friendly enough for even the newest effect pedal users. Each Fundamental pedal has three faders for tweaking the sound and a three-way switch for changing pedal modes. The result is a line of pedals that will keep you covered from your first band practice all the way to a sold-out arena. Designed and assembled at Walrus Audio headquarters in OKC, OK.\u003c\/p\u003e\u003cp\u003e\u003cb\u003e\u003cstrong\u003eFundamental Delay\u003c\/strong\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe Fundamental Delay provides you with the core sounds of repeated effects. With three delay algorithms, you can go from clean digital feedback to an analog delay emulation, as well as reversing your trails.\u003c\/p\u003e\u003cp\u003e\u003cb\u003e\u003cstrong\u003eTime\u003c\/strong\u003e\u003c\/b\u003e: Control the rate of the delayed repeats. Max delay time is one second\u003c\/p\u003e\u003cp\u003e\u003cb\u003e\u003cstrong\u003eFeedback\u003c\/strong\u003e\u003c\/b\u003e: Control the number of repeats.\u003c\/p\u003e\u003cp\u003e\u003cb\u003e\u003cstrong\u003eMix\u003c\/strong\u003e\u003c\/b\u003e: Control the mix of the effect and the original clean signal. All the way to the left outputs a fully clean signal, and all the way to the right outputs only the delay repeats.\u003c\/p\u003e\u003cp\u003e\u003cb\u003e\u003cstrong\u003eSlide Switch\u003c\/strong\u003e\u003c\/b\u003e – The slide switch allows you to change between three distinct Delay algorithms.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDigital – Add a clean rhythmic delay back into your signal, with transparent repeats.\u003c\/li\u003e\n\u003cli\u003eAnalog – Add a filtered and slightly distorted delay back into your signal, designed to replicate the characteristics of bucket brigade delay chips.\u003c\/li\u003e\n\u003cli\u003eReverse – Add reversed trails back into your signal, create gentle melodies, or push into reverse feedback overload.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e\u003cstrong\u003eSlide Switch Secondary Control\u003c\/strong\u003e\u003c\/b\u003e: Control the tap division when tap mode is engaged.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1. Quarter Note\u003c\/li\u003e\n\u003cli\u003e2. Dotted Eighth Note\u003c\/li\u003e\n\u003cli\u003e3. Eighth Note\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e\u003cstrong\u003eTap Mode\u003c\/strong\u003e\u003c\/b\u003e: To enter tap mode, hold down the bypass stompswitch until you see the LED flashing. Once it is flashing, tap mode is engaged and the stomp switch will only work as a tap tempo until tap mode is disengaged. While tap mode is engaged, adjusting the program Slide Switch will only change the division of the tap control, and not the delay program. To disengage tap mode, hold down bypass again until you see the LED turn back to solid white.\u003cbr\u003e\u003cbr\u003eThe pedal will remember the tempo you have tapped in until adjusted again by either the time control or another tempo is tapped in.\u003c\/p\u003e\u003cp\u003e\u003cb\u003e\u003cstrong\u003eTrails Modes\u003c\/strong\u003e\u003c\/b\u003e – The Delay comes with trails mode active by default, to disengage trails mode hold down the bypass stomp switch when applying power to the pedal. Once the LED flashes it indicates that trails mode is turned off. To re-engage trails mode, repeat the process, and wait for the LED to turn dark, indicating that trails mode is back on. With trails mode active, your delay repeats will fade off naturally after turning the pedal off. With trails mode inactive, the decay abruptly cuts off when you turn off the pedal.\u003c\/p\u003e\u003cp\u003e\u003cb\u003e\u003cstrong\u003eSpecs\u003c\/strong\u003e\u003c\/b\u003e:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe Delay comes in a Black finish with green and off-white ink.\u003c\/li\u003e\n\u003cli\u003eThe diecast enclosure's exact size is 4.33\" x 2.16\" x 1.61\".\u003c\/li\u003e\n\u003cli\u003ePower requirements are 9VDC (100mA minimum).\u003c\/li\u003e\n\u003cli\u003eThe use of an isolated power supply is recommended for powering all Walrus Audio Pedals.\u003c\/li\u003e\n\u003cli\u003eDaisy chain power supplies are not recommended. Power supply not included.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":47533120913586,"sku":"ACWALFNDELAY","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/fnulleavrxqejuskr7on.jpg?v=1779972221"},{"product_id":"new-walrus-audio-fundamental-series-reverb-guitar-effects-pedal","title":"New Walrus Audio Fundamental Series Reverb Guitar Effects Pedal","description":"\u003cp\u003eThis item is new, in box! A store receipt is included with your purchase.\u003c\/p\u003e\u003cp\u003eFrom Walrus Audio:\u003cbr\u003e\u003cbr\u003eFor the Fundamental Series, we challenged ourselves to design a set of pedals with the tonal integrity that's required to live on a professional's pedalboard, but with simplified controls friendly enough for even the newest effect pedal users. Each Fundamental pedal has three faders for tweaking the sound and a three-way switch for changing pedal modes. The result is a line of pedals that will keep you covered from your first band practice all the way to a sold-out arena. Designed and assembled at Walrus Audio headquarters in OKC, OK.\u003c\/p\u003e\u003cp\u003e\u003cb\u003e\u003cstrong\u003eFundamental Reverb\u003c\/strong\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe Fundamental Reverb provides you with the core sounds of ambient effects. With three reverb algorithms, you can go from an ambient hall to an analog spring emulation, as well as a bright plate emulation.\u003c\/p\u003e\u003cp\u003e\u003cb\u003e\u003cstrong\u003eDecay\u003c\/strong\u003e\u003c\/b\u003e: Control the amount of reverb decay time. Left is the minimum and right is the maximum amount of time.\u003c\/p\u003e\u003cp\u003e\u003cb\u003e\u003cstrong\u003eTone\u003c\/strong\u003e\u003c\/b\u003e: Control the amount of overall brightness to the reverb\u003c\/p\u003e\u003cp\u003e\u003cb\u003e\u003cstrong\u003eMix\u003c\/strong\u003e\u003c\/b\u003e: Control the mix of the effect and the original clean signal. All the way to the left outputs only the fully clean signal, and all the way to the right outputs only the affected Reverb signal.\u003c\/p\u003e\u003cp\u003e\u003cb\u003e\u003cstrong\u003eSlide Switch\u003c\/strong\u003e\u003c\/b\u003e – The slide switch allows you to change between three distinct Reverb algorithms.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHall – Emulates the large sounds of an acoustic hall, characterized by long decay times and a more diffused and spacious sound.\u003c\/li\u003e\n\u003cli\u003eSpring – Emulates the bouncy twang of the spring reverb commonly found in tube amps.\u003c\/li\u003e\n\u003cli\u003ePlate – Emulates a smooth analog plate reverb, offering a denser, more focused reverberation of the signal.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e\u003cstrong\u003eTrails Modes\u003c\/strong\u003e\u003c\/b\u003e – The Reverb comes with trails mode active by default, to disengage trails mode hold down the bypass stomp switch when applying power to the pedal. Once the LED flashes it indicates that trails mode is turned off. To re-engage trails mode, repeat the process, and wait for the LED to turn dark, indicating that trails mode is back on. With trails mode active, your reverb decay will fade off naturally after turning the pedal off. With trails mode inactive, the decay abruptly cuts off when you turn off the pedal.\u003c\/p\u003e\u003cp\u003e\u003cb\u003e\u003cstrong\u003eSpecs\u003c\/strong\u003e\u003c\/b\u003e:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe Reverb comes in a Black finish with blue-green and off-white ink.\u003c\/li\u003e\n\u003cli\u003eThe diecast enclosure's exact size is 4.33\" x 2.16\" x 1.61\".\u003c\/li\u003e\n\u003cli\u003ePower requirements are 9VDC (100mA minimum).\u003c\/li\u003e\n\u003cli\u003eThe use of an isolated power supply is recommended for powering all Walrus Audio Pedals.\u003c\/li\u003e\n\u003cli\u003eDaisy chain power supplies are not recommended. Power supply not included.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":47533121634482,"sku":"ACWALFNREVERB","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/brhcofqawku7e4oqg8qx.jpg?v=1779972230"},{"product_id":"new-walrus-audio-canvas-re-amp-passive-re-amping-device-for-effects-pedals","title":"New Walrus Audio Canvas Re-Amp Passive Re-amping Device for Effects Pedals","description":"\u003cp\u003eThis item is new, in box! A store receipt is included with your purchase.\u003c\/p\u003e\u003cp\u003eFrom Walrus Audio:\u003cbr\u003e\u003cbr\u003eAdding another tool to the musical paint pallet, Walrus Audio is creating another way to design your tone with the Canvas Series Passive Re-Amp. The Re-Amp is a studio tool designed to send recorded guitar, drums, or other instrument tracks from your recording session through pedals and effects, or different amp combinations. The Re-Amp makes its appearance to facilitate all-new ways to experiment with your songs.\u003cbr\u003e\u003cbr\u003eArtists and producers can save time on tracking sessions by recording dry tracks first, then using Canvas Re-Amp's custom transformer to convert line-level signals, optimizing them to work with amps and guitar pedals of any kind to explore limitless tones and sounds.\u003cbr\u003e\u003cbr\u003eUsing a Re-Amp\u003cbr\u003e1. From your DAW, audio track goes into the Canvas Re-Amp.\u003cbr\u003e2. Out from Re-Amp into pedals or mic'd amp.\u003cbr\u003e3. Out from pedals \/ amp back into DAW.\u003cbr\u003e\u003cbr\u003eCanvas Re-Amp Features:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFrequency Response: 20Hz To 20kHz\u003c\/li\u003e\n\u003cli\u003eTHD+N: 0.07% @ 20Hz \/ +4dBu Input 0.001% @ 1kHz \/ +4dBu Input\u003c\/li\u003e\n\u003cli\u003eMaximum Input Level: +21dBu @ 20Hz\u003c\/li\u003e\n\u003cli\u003eNoise Floor: -116dBu\u003c\/li\u003e\n\u003cli\u003eSignal To Noise Ratio: 114dB @ 1kHz\u003c\/li\u003e\n\u003cli\u003eInput: Balanced Line-Level\u003c\/li\u003e\n\u003cli\u003eInput Impedance: 3k Ohms\u003c\/li\u003e\n\u003cli\u003eOutput: Unbalanced Instrumental-Level\u003c\/li\u003e\n\u003cli\u003eOutput Impedance: 2.5k Ohms\u003c\/li\u003e\n\u003cli\u003eCommon Mode Rejection Ratio: 79dB @ 20Hz \/ +4dBu Input\u003c\/li\u003e\n\u003cli\u003ePower Requirement: None - Passive\u003c\/li\u003e\n\u003cli\u003eAudio Circuit: Transformer Isolated\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":47533122027698,"sku":"ACWALCANVASREAMP","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/bnr4auqgyokaqkomsktf.jpg?v=1779972249"},{"product_id":"new-walrus-audio-slг-er-stereo-ambient-reverb-black-guitar-effects-pedal-sloer","title":"New Walrus Audio Slöer Stereo Ambient Reverb Black Guitar Effects Pedal","description":"\u003cp\u003eThis item is new, in box! A store receipt is included with your purchase.\u003c\/p\u003e\u003cp\u003eFrom Walrus Audio:\u003c\/p\u003e\u003cp\u003eThe Slöer Stereo Ambient Reverb builds on our popular Slö lineup but adds two additional reverb algorithms, stereo width control, two additional modulation wave shapes, and the ability to control the sample rate. Now you can create immersive, lush, modulated, sleepy, and ambient soundscapes with more width and depth than ever before.\u003cbr\u003e\u003cbr\u003eSave your favorite dreamscapes with three onboard presets by simultaneously pressing and holding down on the bypass and sustain switches. Scroll through them by simultaneously pressing and releasing bypass and sustain.\u003cbr\u003e\u003cbr\u003eThe five-way rotary dial allows five different reverb modes - the three you know and love from the Slö: Dark (Lower Octave), Rise (Ambient Swell), and Dream (Latching Pad); and the addition of two new modes: Rain (Delay Tap Diffusion) and Light (High Octave Shimmer). Secondary functions on the dial change between five different wave shapes for modulation on the reverb trail.\u003cbr\u003e\u003cbr\u003eCombine deep modulation, long washy trails, and an immersive stereo field to experience Slöer.\u003c\/p\u003e\u003cp\u003e\u003cb\u003e\u003cstrong\u003eALGORITHMS\u003c\/strong\u003e\u003c\/b\u003e:\u003cbr\u003e\u003cbr\u003eDARK – Add a lower octave to your reverb trail. Here you'll create deep and wide atmospheric sounds and channel nightmarish soundscapes. X knob sets the level of a -1 octave signal that feeds the reverb.\u003cbr\u003e\u003cbr\u003eRISE – This is an auto-swell reverb for beautiful cinematic swells. Don't rush it. Let it breathe and gently wake up. X knob sets the amount of time it takes the reverb to swell in after a note is played. Set lower for shorter rise times and higher for longer rise times.\u003cbr\u003e\u003cbr\u003eDREAM – Lush reverb with a latching pad function. Press the sustain switch to latch signal. Experiment with the X knob to add vibrato over the pad. Press sustain again and the pad will decrescendo according to where the decay knob is set. X knob sets the depth of vibrato applied to the reverb trail.\u003cbr\u003e\u003cbr\u003eRAIN – Tappy and trippy, this program creates a unique effect with lower levels of diffusion allowing the reverb delay taps to audibly create an echo-like effect within your reverb. Use the X control to set the amount of diffusion of the delay taps.\u003cbr\u003e\u003cbr\u003eLIGHT – Bright and smooth reverb with an octave-up shimmer. Create a range of ethereal sounds with the X slider, keep it low for a smooth pad-like reverb or push it higher for a bright shimmer effect.\u003cbr\u003e\u003cbr\u003eThe Slöer also features five different wave shapes accessible by holding down bypass while switching the algorithm dial.\u003cbr\u003e\u003cbr\u003eSINE – Smooth and even pitch up and down modulation.\u003cbr\u003e\u003cbr\u003eWARP – Asymmetric pitch up modulation similar to a warped record.\u003cbr\u003e\u003cbr\u003eSINK – Asymmetric pitch down modulation for sinking detune similar to a Bigsby.\u003cbr\u003e\u003cbr\u003eSQUARE – Symmetric pitch up and down modulation for stepped modulation.\u003cbr\u003e\u003cbr\u003eRANDOM – Uses sample and hold that picks new random values.\u003c\/p\u003e\u003cp\u003e\u003cb\u003e\u003cstrong\u003eMOMENTARY FUNCTIONS\u003c\/strong\u003e\u003c\/b\u003e:\u003cbr\u003e\u003cbr\u003eBypass: When the switch is in the off position, press and hold to temporarily activate the effect to add a moment of reverb texture. Releasing the switch turns the effect off, and fades it out.\u003cbr\u003e\u003cbr\u003eSustain: When pressed, the decay switch ramps up the reverb trail to maximum creating a long dreamy reverb trail, and then ramps back down to the decay knob setting when released. In the “Dream” algorithm, the sustain switch is latching. Press it once to capture and sustain the current reverb decay for extremely long pad-like sounds. Press it again to let the reverb trail taper off, based on the position of the decay knob.\u003c\/p\u003e\u003cp\u003e\u003cb\u003e\u003cstrong\u003eTRAILS MODE\u003c\/strong\u003e\u003c\/b\u003e:\u003cbr\u003eThe Slöer can run in trails or no trails mode. In trails mode, when you turn the pedal off, the reverb decay dies off naturally. In no trails mode, the decay is abruptly cut off when you turn the pedal off. To toggle between either mode, hold down the bypass switch for 1 second while applying power to the pedal. Unplug power and repeat to toggle to the other mode.\u003c\/p\u003e\u003cp\u003e\u003cb\u003e\u003cstrong\u003ePRESET SPILLOVER\u003c\/strong\u003e\u003c\/b\u003e\u003cbr\u003eWhen scrolling through presets, there is only preset spillover if the next preset is the same algorithm as the one preceding it. For example, if your red and green presets are both in Dream mode, switching from red to green will not cut your reverb trails.\u003c\/p\u003e\u003cp\u003eSpecs:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe Slöer comes in a matte black finish with cream ink.\u003c\/li\u003e\n\u003cli\u003eThe die-cast enclosure's exact size is 4.79\" x 3.62\" x 2.25\" including knobs.\u003c\/li\u003e\n\u003cli\u003ePower requirements are 9VDC (100mA minimum).\u003c\/li\u003e\n\u003cli\u003eThe use of an isolated power supply is recommended for powering all Walrus Audio Pedals. Daisy chain power supplies are not recommended.\u003c\/li\u003e\n\u003cli\u003ePower supply not included.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":47533122191538,"sku":"ACWALSLOERBLACK","price":279.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/spcbatl8wxw4buvjctez.jpg?v=1779972256"},{"product_id":"new-walrus-audio-385-overdrive-mkii-black-guitar-effects-pedal","title":"New Walrus Audio 385 Overdrive MKII Black Guitar Effects Pedal","description":"\u003cp\u003eThis item is new, in box!\u003c\/p\u003e\u003cp\u003eFrom Walrus Audio:\u003c\/p\u003e\u003cp\u003eInspired by the rich tones of the Bell and Howell Filmosound 385 projector, the reimagined 385 MKII Overdrive offers dynamic, responsive, tube-like drive with simple but effective controls. The MKII adds an A\/B switch to toggle between two sets of volume and gain knobs that can be used like a preset to change volume and\/or gain for specific parts, as well as a 385+ switch that slams the front end of the circuit for added high-gain saturation.\u003c\/p\u003e\u003cp\u003eFor years, guitarists seeking pure tone have been taking the tube-powered audio sections of vintage film projectors and using them as guitar amps. We fell in love with the unique sound, and were inspired to capture it in a pedalboard-friendly box when we created the original 385 Overdrive pedal.\u003c\/p\u003e\u003cp\u003eThe 385 was developed to have the same simple but effective tone control as its grandfather. While the amp stacks bass and treble behind a single knob, our design separates them, allowing for a much wider array of tones to be achieved. The user is able to boost and cut bass and treble, allowing them to be creative with mid-frequency scoops and bumps.\u003c\/p\u003e\u003cp\u003eWhen we released the 385 Overdrive in 2016, it was quickly adopted by guitar players for the amp-like dynamics you could get at lower gain settings. Soon though, players found that cranking the gain produced a distortion-esque drive that was unique to the 385. To accommodate both setups in a single pedal, we added an A\/B switch along with a second set of Volume and Gain knobs that share a single set of tone controls.\u003c\/p\u003e\u003cp\u003eThe pedal is internally running at 18v, which helps us nail the same dynamic feel of the amp in a stomp box. This means it is extremely sensitive to how hard you dig in – just like the amp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecs\u003c\/strong\u003e:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFlat black enclosure with an illustration of an amp tube warm and ready to rock in cream ink by Josh Yosurack.\u003c\/li\u003e\n\u003cli\u003eThe die cast enclosure's exact size is 4.77\" x 2.6\" x 1.39\" including knobs.\u003c\/li\u003e\n\u003cli\u003ePower requirements are 9VDC (100mA minimum).\u003c\/li\u003e\n\u003cli\u003eThe use of an isolated power supply is recommended for powering all Walrus Audio Pedals.\u003c\/li\u003e\n\u003cli\u003eDaisy chain power supplies are not recommended. Power supply not included.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":47533122388146,"sku":"ACWAL385MKIIB","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/d3h4ujdxy3ju7gklztsa.jpg?v=1779972265"},{"product_id":"new-walrus-audio-canvas-tuner-guitar-effects-pedal","title":"New Walrus Audio Canvas Tuner Guitar Effects Pedal","description":"\u003cp\u003eArguably the most important pedal on your board, the Canvas Tuner ensures that your instrument is ready to sound its best with the perfect meld of versatility and precision. Packaged in the same tough-as-nails, tour-ready enclosure as all Walrus pedals, the Tuner features a bright 2.8\" TFT LCD display that can be viewed under just about any stage lighting conditions, multiple screen orientations, ±0.1 cent accuracy, buffered or true bypass options and more. The Canvas Tuner ensures that you have the most accurate brush to paint your sonic picture.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUncompromising Accuracy\u003c\/strong\u003e\u003cbr\u003ePrecise and accurate tuning you expect with ±0.1 cent accuracy and multiple tuning presets. Tune with confidence, allowing your music to shine with clarity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA World of Sound at Your Fingertips\u003c\/strong\u003e\u003cbr\u003eWith a flat frequency range spanning from 20Hz to 20kHz, the Canvas Tuner is ready to handle tuning for low bass notes to high-strung acoustics. Even bassists needing that low B rumble can tune with confidence.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSee the Music Come to Life\u003c\/strong\u003e\u003cbr\u003eThe 2.8\" TFT LCD display is your window to pitch-perfection. Its crystal-clear quality ensures your tuning is always on point, even under the blazing stage lights or glaring sunlight.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTailored to Your Preferences\u003c\/strong\u003e\u003cbr\u003eTailor your tuning experience to your liking with multiple screen orientation options and selectable Strobe or Needle tuning modes. Your preferences, your performance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYour Aesthetic, Your Way\u003c\/strong\u003e\u003cbr\u003eThe Canvas Tuner comes with eight color themes and multiple screen savers including a custom picture mode* allowing you to personalize your tuner to fit your unique aesthetic. *Photos can be uploaded to the tuner via walrusaudio.io.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTune Faster with Tune Assist\u003c\/strong\u003e\u003cbr\u003eLet Tune Assist guide you swiftly and accurately through your tuning process. With Tune Assist, once your note stays in tune longer than a pre-determined threshold, a border outlining the display will flash letting you know that you are in tune and can move to the next string.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVersatile Bypass Options\u003c\/strong\u003e\u003cbr\u003eEnjoy ultimate flexibility with buffered bypass which routes your audio through our clean, low-noise, high headroom audio buffer with a Total Harmonic Distortion ratio of .001%. This buffer offers a high input impedance of 1M Ohms and low output impedance of 400 Ohms to maintain the highest level of signal integrity. Other available bypass modes include relay bypass, monitor mode, and pass-thru.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCustomize Your Reference Pitch\u003c\/strong\u003e\u003cbr\u003eAdjust the reference pitch from 390Hz to 490Hz to suit your musical needs. Precision tuning for any style of music.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecs\u003c\/strong\u003e:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFrequency Response: 20Hz to 20kHz\u003c\/li\u003e\n\u003cli\u003eTuning Accuracy: ±0.1 cent\u003c\/li\u003e\n\u003cli\u003eTHD: 0.001% @ 20Hz -20dBu, 0.001% @ 1kHz -20dBu\u003c\/li\u003e\n\u003cli\u003eNoise Floor: -112dBu\u003c\/li\u003e\n\u003cli\u003eSignal To Noise Ratio: 98dB @ 1kHz\u003c\/li\u003e\n\u003cli\u003eInput Impedance: ~1M Ohms\u003c\/li\u003e\n\u003cli\u003eOutput Impedance: ~400 Ohms\u003c\/li\u003e\n\u003cli\u003ePower Requirement: 9VDC, 300mA\u003c\/li\u003e\n\u003cli\u003eBypass options: True bypass via a small signal relay; Buffered bypass employing a high quality op amp based buffer\u003c\/li\u003e\n\u003cli\u003eSize Including Stomp\/Jacks: Height: 2.21\" \/ 56.2mm, Width: 2.42\" \/ 61.6mm, Depth: 4.55\" \/ 115.7mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":47533124518066,"sku":"ACWALCANVASTUNER","price":119.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/fnby1ypmzyhamrustevy.jpg?v=1779972300"},{"product_id":"new-walrus-audio-fundamental-series-ambient-reverb-guitar-effects-pedal","title":"New Walrus Audio Fundamental Series Ambient Reverb Guitar Effects Pedal","description":"\u003cp\u003eFrom Walrus Audio:\u003c\/p\u003e\u003cp\u003eFor the Fundamental Series, we challenged ourselves to design a set of pedals with the tonal integrity that's required to live on a professional's pedalboard, but with simplified controls friendly enough for even the newest effect pedal users. Each Fundamental pedal has three faders for tweaking the sound and a three-way switch for changing pedal modes. The result is a line of pedals that will keep you covered from your first band practice all the way to a sold-out arena. Designed and assembled at Walrus Audio headquarters in OKC, OK.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFundamental Ambient\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Fundamental Ambient provides three different atmospheric reverb algorithms to explore beautifully vast and lush soundscapes with plenty of decay time for pillowy soft pad-like decay.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDecay\u003c\/strong\u003e: Control the amount of reverb decay time. Left is the minimum and right is the maximum amount of time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTone\u003c\/strong\u003e: Shapes the overall tonality of the reverb. On Deep and Lush this controls the cutoff of a synth-style lowpass filter. On Haze this controls the width of a resonant bandpass filter, filtering both high and low end at the right, and allowing more high and low to pass through at the left.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMix\u003c\/strong\u003e: Control the mix of the effect and the original clean signal. All the way to the left outputs only the fully clean signal, and all the way to the right outputs only the affected Reverb signal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSlide Switch\u003c\/strong\u003e — The slide switch allows you to change between three distinct Reverb algorithms.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDeep — A dark ambient reverb with an added low octave, perfect for creating murky, cavernous sustain or adding a touch of moody atmosphere.\u003c\/li\u003e\n\u003cli\u003eLush — A breathy, expansive reverb featuring ultra-long sustain. Perfect for generating silky pads and immersive soundscapes with every note.\u003c\/li\u003e\n\u003cli\u003eHaze — A textured, lo-fi reverb featuring distortion, sample rate reduction, and a resonant bandpass tone control, great for vintage or experimental tones.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTrails Modes\u003c\/strong\u003e — The Reverb comes with trails mode active by default, to disengage trails mode hold down the bypass stomp switch when applying power to the pedal. Once the LED flashes it indicates that trails mode is turned off. To re-engage trails mode, repeat the process, and wait for the LED to turn dark, indicating that trails mode is back on. With trails mode active, your reverb decay will fade off naturally after turning the pedal off. With trails mode inactive, the decay abruptly cuts off when you turn off the pedal.\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":47533125828786,"sku":"ACWALFNAMBIENT","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/yxibkqai9kbwzytoie7d.jpg?v=1779972336"},{"product_id":"new-walrus-audio-monumental-orange-harmonic-stereo-tremolo-guitar-effects-pedal","title":"New Walrus Audio Monumental Orange Harmonic Stereo Tremolo Guitar Effects Pedal","description":"\u003cp\u003eFrom Walrus Audio:\u003c\/p\u003e\u003cp\u003eBuilding off the rich, warm, pulsating modulation of the Monument, the Monumental Harmonic Stereo Tremolo is an analog, optical tremolo bringing new controls, features, and width to the Walrus Audio line. New features available in the Monumental include the ability to save presets, blend between standard and harmonic tremolo modes, access to new wave shape and tap division options, and most importantly, a pan control to set the stereo spread of the tremolo to the right and left channels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNew Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTrue Stereo Input\/Output\u003c\/li\u003e\n\u003cli\u003eThe ability to save and recall three on-board presets, as well as a “live” mode\u003c\/li\u003e\n\u003cli\u003eFull expression control over every parameter\u003c\/li\u003e\n\u003cli\u003eAn additional wave shape and tap division\u003c\/li\u003e\n\u003cli\u003ePan control to allow the tremolo to sweep from left to right\u003c\/li\u003e\n\u003cli\u003eS-B-H to allow the user to blend from standard to harmonic tremolo modes\u003c\/li\u003e\n\u003cli\u003eThe ability to ramp up OR down to achieve “Leslie” style ramp from your current rate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eInspired by the beautifully jagged, red-sand desert landscape of Monument Valley, the Monumental Tremolo is capable of blending between harmonic and standard tremolo to produce rich, luscious, warm pulsating modulation capable of peaks and valleys as smooth or as jagged as the real ones that our dear mother nature created long ago.\u003c\/p\u003e\u003cp\u003eWith different combinations of stereo panning, rate, division, and wave shapes, everything from traditional tremolo to inspiring unique waveforms will help you carve new paths that you won't hear anywhere else.\u003c\/p\u003e\u003cp\u003eHarken back to vintage tones inspired by Fender Brownface amps in Harmonic mode. A low-pass and highpass version of your guitar signal is modulated opposite of each other, or 180º out of phase. The result is a warm, almost “chewy” tremolo.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eControls\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePAN\u003c\/strong\u003e: Control the stereo spread of the left and right channels. Counterclockwise is your standard tremolo sound, the left and right channels have the same LFO. Turning the control clockwise will offset the phase of the right LFO to introduce stereo spread. Fully clockwise is maximum panning with the right channel LFO being 180 degrees out of phase from the Left LFO.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eS-B-H\u003c\/strong\u003e: Use this control to blend between standard and harmonic tremolo modes. In standard, all frequencies get affected at the same time. In harmonic, the high and low frequencies are offset from each other.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePRESET\u003c\/strong\u003e: The Monumental has three onboard presets with an additional live mode. Each preset can save and recall every parameter available on the pedal. Press both the bypass switch and tap tempo switch simultaneously to cycle through the available presets (Red, Green, Blue, with White being “live”).\u003c\/p\u003e\u003cp\u003eWhen you are on a preset and you change a parameter, the bypass LED will change color to purple, indicating a change has been made. Once you have determined what sound you want saved for the preset, hold down both footswitches to save the preset.\u003c\/p\u003e\u003cp\u003eLive mode will always return to the current knob positions on the face of the pedal.\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":47533126615218,"sku":"ACWALMONUMENTALO","price":223.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/v0dit551k9qxsjdygz5s.jpg?v=1779972349"},{"product_id":"new-walrus-audio-canvas-power-8-dc-isolated-guitar-effects-pedal-power-supply","title":"New Walrus Audio Canvas Power 8 DC Isolated Guitar Effects Pedal Power Supply","description":"\u003cp\u003eFrom Walrus Audio:\u003c\/p\u003e\u003cp\u003eCanvas Power Supplies bring simplicity and modularity to powering your pedalboard. Delivering up to 500mA of silent, isolated, and clean 9V power to each output, these power supplies are perfect for the modern pedalboard. The Canvas Power series is built using modern switch mode supply architectures. This means each output is isolated, highly efficient, and heavily filtered ensuring they supply plenty of power with incredibly low noise.\u003c\/p\u003e\u003cp\u003eEach model is available for purchase as a standalone power supply or as a linkable unit to another supply via 24v power link, allowing Canvas Power to grow with your power needs without adding another cable you need to plug into the wall.\u003c\/p\u003e\u003cp\u003eThe super slim design allows Canvas Power Supplies to fit under nearly any pedalboard, and the included universal mounting brackets mean you don't have to worry about your power supply staying put when you're hustling to your next gig.\u003c\/p\u003e\u003cp\u003eThe onboard LED power meter lets you clearly see how much power consumption is remaining, and each output has its own LED indicator letting you know when it's sending power.\u003c\/p\u003e\u003cp\u003eWe've also developed custom 2.1mm barrel cables with a 90-degree plug on one end, and our all-new super short straight plug on the other, giving you the maximum flexibility for fitting these power supplies into tight spaces. Of course, they all accept standard 2.1mm barrel cables as well.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCanvas Power 8 Details\u003c\/strong\u003e\u003cbr\u003eThe Canvas Power 8 has 8 isolated power outputs delivering up to 500mA of clean power at 9v. Two of the outlets are variable voltage, letting you switch between 9v, 12v, and 18v for powering high-voltage pedals. It also includes a USB-C port for powering devices like your phone or tablet while you play.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's in the Box?\u003c\/strong\u003e\u003cbr\u003e- 1 x Canvas Power Supply\u003cbr\u003e- 18\" straight to right angle DC Cable – Qty. 5\u003cbr\u003e- 36\" straight to right angle DC Cable – Qty. 3\u003cbr\u003e- 48W, 24V DC 2A power brick and country specific IEC cable\u003cbr\u003e- L style mounting bracket set\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":47533126942898,"sku":"ACWALCANVASP8","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/t4ktbsnlkcxqrelvspi1.jpg?v=1779972379"},{"product_id":"new-walrus-audio-canvas-power-8-link-isolated-guitar-effects-pedal-power-supply","title":"New Walrus Audio Canvas Power 8 LINK Isolated Guitar Effects Pedal Power Supply","description":"\u003cp\u003e\u003cstrong\u003eNOTE: THIS IS THE LINK VERSION! IT CANNOT BE POWERED BY ITSELF! THIS DOES NOT INCLUDE A DC ADAPTER!\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFrom Walrus Audio:\u003c\/p\u003e\u003cp\u003eCanvas Power Supplies bring simplicity and modularity to powering your pedalboard. Delivering up to 500mA of silent, isolated, and clean 9V power to each output, these power supplies are perfect for the modern pedalboard. The Canvas Power series is built using modern switch mode supply architectures. This means each output is isolated, highly efficient, and heavily filtered ensuring they supply plenty of power with incredibly low noise.\u003c\/p\u003e\u003cp\u003eEach model is available for purchase as a standalone power supply or as a linkable unit to another supply via 24v power link, allowing Canvas Power to grow with your power needs without adding another cable you need to plug into the wall.\u003c\/p\u003e\u003cp\u003eThe super slim design allows Canvas Power Supplies to fit under nearly any pedalboard, and the included universal mounting brackets mean you don't have to worry about your power supply staying put when you're hustling to your next gig.\u003c\/p\u003e\u003cp\u003eThe onboard LED power meter lets you clearly see how much power consumption is remaining, and each output has its own LED indicator letting you know when it's sending power.\u003c\/p\u003e\u003cp\u003eWe've also developed custom 2.1mm barrel cables with a 90-degree plug on one end, and our all-new super short straight plug on the other, giving you the maximum flexibility for fitting these power supplies into tight spaces. Of course, they all accept standard 2.1mm barrel cables as well.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCanvas Power 8 Details\u003c\/strong\u003e\u003cbr\u003eThe Canvas Power 8 has 8 isolated power outputs delivering up to 500mA of clean power at 9v. Two of the outlets are variable voltage, letting you switch between 9v, 12v, and 18v for powering high-voltage pedals. It also includes a USB-C port for powering devices like your phone or tablet while you play.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's in the Box?\u003c\/strong\u003e\u003cbr\u003e- 1 x Canvas Power Supply\u003cbr\u003e- 18\" straight to right angle DC Cable – Qty. 5\u003cbr\u003e- 36\" straight to right angle DC Cable – Qty. 3\u003cbr\u003e- 12\" EIAJ Link cable\u003cbr\u003e- L style mounting bracket set\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":47533127106738,"sku":"ACWALCANVASP8L","price":183.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/jxxo4cupklpunics2zeo.jpg?v=1779972395"},{"product_id":"new-walrus-audio-canvas-power-hp-link-isolated-guitar-effects-pedal-power-supply","title":"New Walrus Audio Canvas Power HP LINK Isolated Guitar Effects Pedal Power Supply","description":"\u003cp\u003e\u003cstrong\u003eNOTE: THIS IS THE LINK VERSION! IT CANNOT BE POWERED BY ITSELF! THIS DOES NOT INCLUDE A DC ADAPTER!\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFrom Walrus Audio:\u003c\/p\u003e\u003cp\u003eThe Canvas Power HP allows you to power the thirstiest of modelers and pedals with a massive 3A (three Amp, or 3,000mA) output. The HP also has 3 isolated power outputs delivering up to 500mA of clean power at 9v. The 3A output can also switch between 9V and 12V for powering high-voltage pedals.\u003c\/p\u003e\u003cp\u003eCanvas Power HP Supply brings simplicity and modularity to powering your modeler, multi-effect unit, or high powered pedals. Delivering up to 3A in one port and up to 500mA in three ports of silent, isolated, and clean 9V power, the Power HP is perfect for hybrid rigs using pedals and modelers like the Quad Cortex, HX Series, and many more. The Canvas Power series is built using modern switch mode supply architectures. This means each output is isolated, highly efficient, and heavily filtered ensuring they supply plenty of power with incredibly low noise.\u003c\/p\u003e\u003cp\u003eThe Power HP is available for purchase as a standalone power supply or as a linkable unit to another supply via 24V power link, allowing Canvas Power to grow with your power needs without adding another cable you need to plug into the wall.\u003c\/p\u003e\u003cp\u003eThe super slim 1.2 inch design allows Canvas Power Supplies to fit under nearly any pedalboard, and the included universal mounting brackets mean you don't have to worry about your power supply staying put when you're hustling to your next gig.\u003c\/p\u003e\u003cp\u003eThe onboard LED power meter lets you clearly see how much power consumption is remaining, and each output has its own LED indicator letting you know when it's sending power.\u003c\/p\u003e\u003cp\u003eWe've also developed custom 2.1mm barrel cables with a 90-degree plug on one end, and our all-new super short straight plug on the other, giving you the maximum flexibility for fitting these power supplies into tight spaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCanvas Power HP Details\u003c\/strong\u003e\u003cbr\u003eThe Canvas Power HP has 3 isolated power outputs delivering up to 500mA of clean power at 9v, and one 3A isolated output with selectable 9 or 12V. Assorted 2.1mm and 2.5mm reverse and standard polarity cables are also included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's in the Box (Canvas Power HP Link):\u003c\/strong\u003e\u003cbr\u003e- 1 x Canvas Power Supply\u003cbr\u003e- 18\" Straight to right angle DC Cable – Qty. 3\u003cbr\u003e- 2.1mm Standard Polarity DC Cable (Yellow) - Qty. 1\u003cbr\u003e- 2.1mm Reverse Polarity DC Cable (White) - Qty. 1\u003cbr\u003e- 2.5mm Reverse Polarity DC Cable (Red) - Qty. 1\u003cbr\u003e- 2.5mm Standard Polarity DC Cable (Blue) - Qty. 1\u003cbr\u003e- 12\" EIAJ Link cable\u003cbr\u003e- C style mounting bracket set\u003cbr\u003e- M3 Hex Key\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecs:\u003c\/strong\u003e\u003cbr\u003eDimensions: 133mm x 54mm x 25.5mm (5.23in x 2.12in x 1in)\u003cbr\u003eWeight: 186g (.41lbs)\u003cbr\u003e1 - 3A (three amp, 3,000mA) 9V or 12V variable output\u003cbr\u003e3 - 9VDC 500mA outputs\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":47533130547378,"sku":"ACWALCANVASPHPL","price":167.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/dcu4o5ezf98versbaegl.jpg?v=1779972421"},{"product_id":"new-walrus-audio-mako-series-mkii-m1-high-fidelity-modulation-guitar-effects-pedal","title":"New Walrus Audio MAKO Series MKII M1 High-Fidelity Modulation Guitar Effects Pedal","description":"\u003cp\u003eFrom Walrus Audio:\u003c\/p\u003e\u003cp\u003eThe M1 MKII is a stereo, all-in-one modulation pedal featuring six studio-grade programs based on fan-favorite modulation tones: Chorus, Phaser, Tremolo, Vibrato, Rotary, and Filter. A sound explorer's delight, the M1 features a dedicated lo-fi knob allowing you to mix various lo-fi parameters to every program. From the swirling, lush sounds of the 80's to more subtle applications that give your tone a distinct flair, this is a hallmark for all kinds of modulation fans, offering limitless creative potential.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNew Features:\u003c\/strong\u003e\u003cbr\u003eThe M1 features six fine-tuned modulation algorithms: Chorus, Phaser, Tremolo, Vibrato, Rotary, and Filter\u003cbr\u003e\u003cbr\u003eTotal BPM control, allowing users to select their specific tempo and read it out on the menu screen for Chorus, Phaser, Tremolo, and Vibrato programs\u003cbr\u003e\u003cbr\u003eInternal wet\/dry mix\u003cbr\u003e\u003cbr\u003eAll new flanger sound added to the Chorus algorithm\u003cbr\u003e\u003cbr\u003e128 on Board presets\u003cbr\u003e\u003cbr\u003eNavigation Menu for adjusting secondary controls and Lofi parameters\u003cbr\u003e\u003cbr\u003eRevamped Rotary and Filter programs\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProgram Controls\u003c\/strong\u003e\u003cbr\u003eEach program can be fully customized to your taste and playing style with the left encoder knob for features like effect type, BPM, wave shape, and more.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePrograms\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChorus\u003c\/strong\u003e\u003cbr\u003eFrom subtle chorus to vibrant and lush tri-chorus that will instantly teleport you to the 80s. Type I is a traditional chorus great for tight smooth chorus tones. Type II finds its roots in the classic tri-chorus effect running three chorus units in parallel for a lush multi-dimensional chorus. Type III transforms into a sweeping, vintage-style flanger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePhaser\u003c\/strong\u003e\u003cbr\u003eClassic 70s phaser sounds we all know and love, with added features. Type I is a 2-stage Phaser. Type II is a 4-stage model. Type III is a phaser modeled after the unique tuning and LFO shape found in a Uni-Vibe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTremolo\u003c\/strong\u003e\u003cbr\u003eThree algorithms with stereo spread options. Type I is excellent for traditional sounds similar to optical and bias tremolos. Type II is a warm and cozy harmonic tremolo. Type III offers several predefined patterns for rhythmic sequenced pulsing tremolo.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVibrato\u003c\/strong\u003e\u003cbr\u003eMake good parts great with detuned, warbly, and vintage sounds that harken back to the 60s. Type I “Traditional” focuses on standard vibrato sounds. Type II “Vinyl” with classic RPMs on the rate knob. Type III “Tape” is our take on the wow and flutter pitch characters found in old tape players.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRotary\u003c\/strong\u003e\u003cbr\u003eType I aims for that traditional watery sound of a well-oiled Leslie speaker. Type II only spins the horn. Type III only spins the drum.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFilter\u003c\/strong\u003e\u003cbr\u003eType I is a lowpass filter. Type II is a highpass filter. Type III is a bandpass filter. Can be easily run as an Envelope Follower type filter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLo-Fi Controls\u003c\/strong\u003e\u003cbr\u003eEnv, Drive, Space, Age, Noise, Warble – six global lo-fi controls to degrade and color your signal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePresets\u003c\/strong\u003e\u003cbr\u003eThe M1 can save up to 128 onboard presets accessible via footswitch or MIDI.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecs\u003c\/strong\u003e\u003cbr\u003eThe M1 MKII comes in a dark blue finish with red, orange, cream, gold, green, purple and blue ink.\u003cbr\u003eThe 2in OLED screen measures 128x32 pixels.\u003cbr\u003eEnclosure size with knobs: 4.9\" x 2.52\" x 2.64\".\u003cbr\u003ePower requirements: 9VDC (300mA minimum). Power supply not included.\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":47533130645682,"sku":"ACWALMAKOMK2M1","price":319.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/c2jrm8devrhqcfejoaqq.jpg?v=1779972436"}],"url":"https:\/\/www.citymusicannex.com\/collections\/walrus-audio-sale.oembed","provider":"City Music Annex","version":"1.0","type":"link"}