{"title":"EarthQuaker Devices","description":"\u003cp\u003eShop EarthQuaker Devices pedals at City Music Annex — new and used. Use the filters to sort by condition, price, availability and more.\u003c\/p\u003e","products":[{"product_id":"new-earthquaker-devices-erupter-fuzz-guitar-effects-pedal","title":"New Earthquaker Devices Erupter Fuzz Guitar Effects Pedal","description":"\u003cp\u003eULTIMATE FUZZ TONE\u003c\/p\u003e\n\u003cp\u003eWhen’s the last time you turned up your favorite fuzz pedal to anything but eleven? If there’s one true thing about rock n’ roll, it’s that it sounds best cranked all the way up. But where does one go from here? One louder! Enter the Erupter™.\u003c\/p\u003e\n\u003cp\u003eThe Erupter is the result of over two years’ worth of tone-chasing, tweaking, and experimentation in search of the ultimate classic fuzz tone with a big low end (but not too mushy), a biting top end without being too harsh, and just enough output to politely send a tube amp over the top.\u003c\/p\u003e\n\u003cp\u003eEarthquaker used every trick in the book to craft a classic fuzz Device that sounds good with any pickup type, anywhere in the chain (even before a wah pedal!) without any tone-sucking impedance mismatching. They build each Erupter with a buffered input section, transformer-based pickup simulation, new production 5% ½ watt carbon composition resistors, metallized polyester film capacitors, Sprague and BC electrolytic capacitors, and low-gain, hand-matched NOS silicon transistors to deliver a well-rounded and defined fuzz tone with just enough pummeling intensity, so you can rock n’ roll all night and still get to bed at a reasonable hour.\u003c\/p\u003e\n\u003cp\u003eThe Erupter’s simple control set stands in stark relief of its rigorous design process, and believe 'em, they tried everything. Adding controls, removing controls, measuring resistors, swapping transistors, trying different capacitor values, rolling dice, throwing darts at transformer spec sheets on the wall… Heck, we would have done William Burroughs-style circuit board cut-ups if we thought it would’ve worked. If it’s good enough for the Stones, it’s gotta be good enough for us, right?\u003c\/p\u003e\n\u003cp\u003eAnywho, what they finally landed on is a super-simple single knob setup that allows you to bias the Erupter’s NOS silicon transistors for the perfect sound and feel, while still being touch responsive and cleaning up nicely when you roll back the guitar’s volume and tone controls.\u003c\/p\u003e\n\u003cp\u003eLow “Bias” settings yield a rude, spongy fuzz tone with plenty of sag and a blossoming attack envelope that’s gated without entering “dying battery” territory. As the “Bias” control is increased, additional harmonics stack atop the input signal, producing a stiffer, more complex fuzz tone with a tighter response, increased output, and longer sustain. They had a custom center-detent pot made to fit the required resistance for the Erupter. When the Bias control is set at noon you will feel a little click. That means the pedal is perfectly biased to give the best possible fuzz tone.\u003c\/p\u003e\n\u003cp\u003eThe Erupter uses a fixed master output level and gain setting for the thickest fuzz possible and to push the full frequency range of the guitar out front when you kick it on. And they do hope you’ll kick it on often.\u003c\/p\u003e\n\u003cp\u003eEach and every Erupter is built by the hands of real-life dream warriors in the foothills of Mt. Akron, Ohio.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eControls:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eBias - This control has a center detent for the \"perfect\" fuzz setting. When in the center position, the tone will be big and round with a slight volume boost and great sustain. As you turn this counter clockwise it becomes more gated with lower output. As you turn this clockwise it becomes louder and more refined.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eMeasures:\u003c\/p\u003e\n\u003cp\u003e4.625″ x 2.6″ x 2.25″ with knob\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eSwitching:\u003c\/p\u003e\n\u003cp\u003eThis device is true bypass and uses electronic relay based switching. Audio will not pass without power.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePower:\u003c\/p\u003e\n\u003cp\u003eThe Erupter can be powered by a 9v battery or a standard 9-volt DC power supply with a 2.1 mm negative center barrel. Earthquaker Devices always recommends pedal-specific, transformer-­isolated wall-wart power supplies or multiple isolated­-output supplies. Pedals will make extra noise if there is ripple or unclean power.\u003c\/p\u003e\n\u003cp\u003eSwitching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. Do not run at higher voltages!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInput impedance: 500K\u003c\/li\u003e\n\u003cli\u003eOutput impedance: \u0026gt;1K\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCurrent draw: 15 mA\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Earthquaker Devices","offers":[{"title":"Default Title","offer_id":41137170383026,"sku":"ACEARERUPTER","price":149.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/products\/57_6b14e62a-aee9-4698-8fc6-80cc866c95d8.jpg?v=1633948951"},{"product_id":"new-earthquaker-devices-bit-commander-v2-monophonic-guitar-synthesizer-pedal","title":"New Earthquaker Devices Bit Commander V2 Monophonic Guitar Synthesizer Pedal","description":"\u003cp\u003eThe Bit Commander is a monophonic analog guitar synthesizer with four octaves of vintage square wave synth tones. Its no-nonsense interface makes it easy to add or subtract octaves to create a wide variety of sounds without having to dial in envelopes or oscillators. Ripping sub-octave thump, pulsing octave down, a lightly squared base tone and a swelling transformer based octave up all join together to make a single guitar sound like an army of olde tyme synths.\u003c\/p\u003e\n\u003cp\u003eLike all analog octave effects, there are some basic rules to follow that will get you the most enjoyment from your Bit Commander. Use the neck pickup and play single notes. The best tracking occurs from the 7th fret up on all the strings. Below the 7th will still track but there will be occasional glitches and stutters. The lower the note, the harder it is for the Bit Commander to register. The use of Bass and lower registers on keyboards will yield unexpected, sometimes pleasing, sometimes disgusting results. These are not mistakes or flaws, it is the nature of analog octaves.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eBit Commander V2 Features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFour voice analog octave synthesizer\u003c\/li\u003e\n\u003cli\u003eSub-octave thump\u003c\/li\u003e\n\u003cli\u003ePulsing octave down\u003c\/li\u003e\n\u003cli\u003eLightly squared base tone\u003c\/li\u003e\n\u003cli\u003eSwelling transformer based octave up\u003c\/li\u003e\n\u003cli\u003eFilter control\u003c\/li\u003e\n\u003cli\u003eSilent soft-touch switching*\u003c\/li\u003e\n\u003cli\u003eAll-analog dry signal path\u003c\/li\u003e\n\u003cli\u003eHand made one at a time in the republic of Akron Ohio\u003c\/li\u003e\n\u003cli\u003eLifetime guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eControls:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSub: Two octaves down level\u003c\/li\u003e\n\u003cli\u003eDown 1: One octave down level\u003c\/li\u003e\n\u003cli\u003eUp 1: One octave up level\u003c\/li\u003e\n\u003cli\u003eBase: Squared input signal level\u003c\/li\u003e\n\u003cli\u003eLevel: Master volume\u003c\/li\u003e\n\u003cli\u003eFilter: Tone control, more highs clockwise, more warmth counter clockwise\u003c\/li\u003e\n\u003cli\u003eAnalog, true bypass and hand made one at a time in the republic of Akron Ohio.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eMeasures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 5\/8″ x 2 1\/2″ x 2.25″ with knobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003ePower (Not Included):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA standard 9 volt DC power supply with a negative center 2.1mm barrel, no battery option.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Earthquaker Devices","offers":[{"title":"Default Title","offer_id":41137237754034,"sku":"ACEARBITCMMNDV2","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/products\/57_37b98963-eb72-4d09-bfca-170d0d381909.jpg?v=1633949604"},{"product_id":"new-earthquaker-devices-astral-destiny-octave-reverb-guitar-effects-pedal","title":"New EarthQuaker Devices Astral Destiny Octave Reverb Guitar Effects Pedal","description":"\u003cp\u003eAn Octal Octave Reverberation Odyssey:\u003c\/p\u003e\n\u003cp\u003eThe Astral Destiny is a compact and powerful modulated octave reverb pedal that features 8 reverb modes with 8 editable presets, assignable expression control, tails for natural reverb decay when the effect is bypassed and a super cool stretch feature that doubles the length of the reverb while adding an adjustable pitch bending effect.\u003c\/p\u003e\n\u003cp\u003eReverb Modes:\u003c\/p\u003e\n\u003col type=\"1\" start=\"1\"\u003e\n\u003cli\u003eAbyss: Huge reverb with no octave effect\u003c\/li\u003e\n\u003cli\u003eShimmer: Adds an upper octave to the reverb tail\u003c\/li\u003e\n\u003cli\u003eSub: Adds a lower octave to the reverb tail\u003c\/li\u003e\n\u003cli\u003eSub Shimmer: Adds an upper and lower octave to the reverb tail\u003c\/li\u003e\n\u003cli\u003eAstral: Adds an upper and lower octave combined with a regenerating tail\u003c\/li\u003e\n\u003cli\u003eAscend: Upward pitch bending\u003c\/li\u003e\n\u003cli\u003eDescend: Downward pitch bending\u003c\/li\u003e\n\u003cli\u003eCosmos: Adds a regenerating fifth to the reverb tail\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003ePresets:\u003c\/p\u003e\n\u003cp\u003eThe Astral Destiny operates between two different modes: Live or Preset. It comes with 8 factory presets, 1 for each reverb mode, that can be edited or completely overwritten for your enjoyment. The settings for Length, Depth, Rate, Tone, Mix as well as EXP assignment and Stretch length can all be stored and recalled. Any of the Astral Destiny's 8 reverb modes can be used as the basis for each of the 8 presets.\u003c\/p\u003e\n\u003cp\u003eLive Mode:\u003c\/p\u003e\n\u003cp\u003eThis is the standard mode of operation that the Astral Destiny ships in and is indicated by a Green or Red Activate LED depending on the bypass state. Astral Destiny will operate manually in this mode and all controls will visually indicate the current settings.\u003c\/p\u003e\n\u003cp\u003ePreset Mode:\u003c\/p\u003e\n\u003cp\u003eThis puts the Astral Destiny into one of the 8 presets selected by the Preset rotary switch. This mode is indicated by a Yellow Activate LED. The panel controls will no longer operate as visually set and instead, the Astral Destiny will use the stored control settings for each selected preset position. If a control change is made while in Preset Mode, the Activate LED will begin to flash. You can easily save this change by holding down both footswitches until both LED's flash 4 times indicating that the change has been saved.\u003c\/p\u003e\n\u003cp\u003eTails or Full Bypass Switching:\u003c\/p\u003e\n\u003cp\u003eAstral Destiny can operate in two different bypass states: Tails or Full Bypass. It comes factory set in Tails Mode which allows the reverb effect to naturally decay after the effect is bypassed and is indicated by a Green Activate LED. Full Bypass will cut the reverb effect completely when the effect is bypassed and is indicated by a Red Activate LED.\u003c\/p\u003e\n\u003cp\u003eAstral Destiny is buffered bypass which means that there will always be an active buffer present and it requires power to pass signal.\u003c\/p\u003e\n\u003cp\u003eStretch Footswitch:\u003c\/p\u003e\n\u003cp\u003eThe Stretch footswitch doubles the length of the reverb effect while adding a temporary change in pitch.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTap for an immediate pitch change.\u003c\/li\u003e\n\u003cli\u003eHold for a temporary pitch bending effect.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAdjusting the Speed of the Pitch Bend:\u003c\/p\u003e\n\u003col type=\"1\" start=\"1\"\u003e\n\u003cli\u003eHold down the Stretch footswitch.\u003c\/li\u003e\n\u003cli\u003eTurn the Length control clockwise for a longer pitch bend or counterclockwise for a shorter pitch bend.\u003c\/li\u003e\n\u003cli\u003eRelease the Stretch footswitch once you have selected your desired length.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThe Stretch footswitch will now operate at the selected speed every time the Astral Destiny is powered on.\u003c\/p\u003e\n\u003cp\u003ePower:\u003c\/p\u003e\n\u003cp\u003eThis device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. EarthQuaker Devices always recommends pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power.\u003c\/p\u003e\n\u003cp\u003eSwitching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 4.65 x 3.65 x 2.25 in. (118 x 93 x 57 mm) with knobs\u003c\/li\u003e\n\u003cli\u003eInput Impedance: 500 kΩ\u003c\/li\u003e\n\u003cli\u003eOutput Impedance: 100 Ω\u003c\/li\u003e\n\u003cli\u003eCurrent Draw: 85 mA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eExpression Jack:\u003c\/p\u003e\n\u003cp\u003eUse any TRS expression pedal to take control over the Length, Depth, Rate, Tone, or Mix panel controls! You can also use Control Voltage with the EXP Jack. The CV range is 0 - 3.3v.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSleeve = Ground\u003c\/li\u003e\n\u003cli\u003eRing = 3.3v\u003c\/li\u003e\n\u003cli\u003eTip = Wiper (CV)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":41137533518002,"sku":"ACEARASTRALDSTNY","price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/products\/57_0066f38f-90e4-4ad2-b6e6-12b087799505.jpg?v=1633952564"},{"product_id":"new-earthquaker-devices-acapulco-gold-v2-overdrive-distortion-effects-pedal-1","title":"New Earthquaker Devices Acapulco Gold V2 Overdrive Distortion Effects Pedal","description":"\u003cp\u003eWhat's up, Buds? Welcome to your new Acapulco Gold!\u003c\/p\u003e\n\u003cp\u003eThe Acapulco Gold is a dirt-simple power amp distortion device that's based on the vibe of a cranked Sunn Model T. You know what's awesome? Vintage Sunn Amplifiers. You know what else is awesome? Simplicity. One button, one knob. How loud would you like it? Just move the knob. This is the spirit of rock and roll. Quit turning knobs and play that guitar like you mean it.\u003c\/p\u003e\n\u003cp\u003eWhile playing, you may want to try ignoring our suggestion and try fiddlin' with your guitar's volume and tone knobs as these can drastically affect the sound of the Acapulco Gold. The volume knob on your guitar cleans up the pedal nicely, but not too clean. At minimum guitar volume settings, the Gold imparts a hazy, Nashville-sounding spank to your tone. At just-barely-backed-off, the Gold turns into a raunchy overdrive. And of course when the guitar volume is completely open, the Gold roars like a Model T on the verge of explosion. It's not quite fuzz, but so close.\u003c\/p\u003e\n\u003cp\u003eEach Acapulco Gold is made part by part, wire by wire, giant knob by giant knob with real, live humanimal hands in our gilded manufactory located in gray olde Akron, Ohio, USA.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eControls:\u003c\/p\u003e\n\u003cp\u003eBig Knob: The big knob sets the output level, sometimes known as Volume.\u003c\/p\u003e\n\u003cp\u003ePLEASE BE CAREFUL! The Acapulco Gold is extremely loud!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eMeasures:\u003c\/p\u003e\n\u003cp\u003e4 5\/8″ x 2 1\/2″ x 2.25″ with knob\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePower:\u003c\/p\u003e\n\u003cp\u003eOur pedals take a standard 9 volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. Do not run at higher voltages! Current draw is 30 mA.\u003c\/p\u003e","brand":"Earthquaker Devices","offers":[{"title":"Default Title","offer_id":41137600233650,"sku":"ACEARACAPULCOV2","price":139.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/products\/57_14b7214b-0515-41d6-8484-675e3d702647.jpg?v=1633953551"},{"product_id":"new-earthquaker-devices-arpanoid-v2-polyphonic-pitch-arpeggiator-effects-pedal","title":"New Earthquaker Devices Arpanoid V2 Polyphonic Pitch Arpeggiator Effects Pedal","description":"\u003cp\u003ePolyphonic Arpeggiator:\u003c\/p\u003e\n\u003cp\u003eYou did it! The Arpanoid is the first dedicated compact polyphonic pitch arpeggiator effects pedal for the electric guitar! Great job.\u003c\/p\u003e\n\u003cp\u003e“Uh, that’s great, but what does it do?”\u003c\/p\u003e\n\u003cp\u003eThe Arpanoid takes whatever notes you play and calculates an adjustable ascending or descending scale based on the root note.\u003c\/p\u003e\n\u003cp\u003e“Sure, I guess. Does it track chords?”\u003c\/p\u003e\n\u003cp\u003eYes! The Arpanoid works on complex chords as well as single notes in any key. Its eight modes feature major and minor patterns so your next jazz odyssey will remain on time and in tune. The patterns go from one octave below the input to one octave above, so there’s plenty of harmonic range, and the Arpanoid’s “random” patterns are sure to be a hit at your next psychedelic freakout.\u003c\/p\u003e\n\u003cp\u003e“Okay . . . is that it?”\u003c\/p\u003e\n\u003cp\u003eNo way! The Arpanoid has a variable “Step” control to choose the number of notes in the sequence, which determines the rhythm and meter of the pattern, along with the overall feel of the effect. Experimenting with this control will open your third eye to odd time signatures, polyrhythms, and a unique quantized hard-sync vibrato effect! Furthermore, the independent “Wet” and “Dry” controls allow you to blend the all-analog input signal with the all-digital affected signal, making the Arpanoid useful for anything from subtle ambient tone clusters to a bombastic polyphonic flourish, and the ability to use the Arpanoid fully wet makes it great for use in the studio! Patch it on inserts! Try it on vocals! Synths! Drum machines! Use it on sends! Go nuts, (lady)dude.\u003c\/p\u003e\n\u003cp\u003eEarthquaker Devices suggests treating the Arpanoid like a new instrument and taking some time to get to know and love it. Once you understand how the Arpanoid will work for you, you and your device will live a long, fulfilling, happy life of mutual musical enjoyment.\u003c\/p\u003e\n\u003cp\u003eThe Arpanoid is true-bypass, and built one-at-a-time by a bunch of glowing orbs in the parallel universe of Akron, Ohio, USA.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eControls:\u003c\/p\u003e\n\u003cp\u003eWet: Level control for the effect signal. Unity is around noon.\u003c\/p\u003e\n\u003cp\u003eDry: Level control for the dry signal. Unity is around noon.\u003c\/p\u003e\n\u003cp\u003eRate: Adjusts the speed of the sequence.\u003c\/p\u003e\n\u003cp\u003eStep: Selects how many notes there are in the sequence.\u003c\/p\u003e\n\u003cp\u003eUp\/Up-Down\/Down Toggle: Switch to control the direction of the sequence. All the way left is up, the sequence will continually repeat going up. In the middle is up\/down, the sequence will continually repeat going up then back down. All the way right is down, the signal will continually repeat going down.\u003c\/p\u003e\n\u003cp\u003eMode: 8 position selector switch to choose the octave and key:\u003c\/p\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003e1: Major: -1 octave to root.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003e2: Major: root to +1 octave.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003e3: Major: -1 octave through +1\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003e4: Major: Random pattern\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003e5: Minor: -1 octave to root.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003e6: Minor: root to +1 octave.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003e7: Minor: -1 octave through +1\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003e8: Minor: Random pattern\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003eMeasures:\u003c\/p\u003e\n\u003cp\u003e4.75″ x 2.50″ x. 2.25″ with knobs\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePower:\u003c\/p\u003e\n\u003cp\u003eThe Arpanoid should be powered a standard 9-volt DC power supply with a 2.1mm negative center barrel. They always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. Do not run at higher voltages!\u003c\/p\u003e\n\u003cp\u003eCurrent Draw: 55mA\u003c\/p\u003e\n\u003cp\u003eInput Impedance: 1M\u003c\/p\u003e\n\u003cp\u003eOutput Impedance: \u0026lt;1K\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eFlexi-Switching:\u003c\/p\u003e\n\u003cp\u003eThis device features Flexi-Switch Technology on the Gain and Boost switches! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor momentary operation, hold the footswitch down for as long as you’d like to use the effect. Once you release the switch the effect will be bypassed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSince the switching is relay based, it requires power to pass signal.\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":41137612914866,"sku":"ACEARARPANOIDV2","price":249.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/products\/57_591577e3-d6ca-4cac-ad76-f258c545ae0e.jpg?v=1633953686"},{"product_id":"new-earthquaker-devices-arpanoid-v2-polyphonic-pitch-arpeggiator-effects-pedal-1","title":"New Earthquaker Devices Arpanoid V2 Polyphonic Pitch Arpeggiator Effects Pedal","description":"\u003cp\u003eWith your purchase you will receive Two New Fender Custom Shop Tweed 6 Inch Patch Cables and a New Fender Custom Shop Tweed 10 Foot Instrument Cable!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePolyphonic Arpeggiator:\u003c\/p\u003e\n\u003cp\u003eYou did it! The Arpanoid is the first dedicated compact polyphonic pitch arpeggiator effects pedal for the electric guitar! Great job.\u003c\/p\u003e\n\u003cp\u003e“Uh, that’s great, but what does it do?”\u003c\/p\u003e\n\u003cp\u003eThe Arpanoid takes whatever notes you play and calculates an adjustable ascending or descending scale based on the root note.\u003c\/p\u003e\n\u003cp\u003e“Sure, I guess. Does it track chords?”\u003c\/p\u003e\n\u003cp\u003eYes! The Arpanoid works on complex chords as well as single notes in any key. Its eight modes feature major and minor patterns so your next jazz odyssey will remain on time and in tune. The patterns go from one octave below the input to one octave above, so there’s plenty of harmonic range, and the Arpanoid’s “random” patterns are sure to be a hit at your next psychedelic freakout.\u003c\/p\u003e\n\u003cp\u003e“Okay . . . is that it?”\u003c\/p\u003e\n\u003cp\u003eNo way! The Arpanoid has a variable “Step” control to choose the number of notes in the sequence, which determines the rhythm and meter of the pattern, along with the overall feel of the effect. Experimenting with this control will open your third eye to odd time signatures, polyrhythms, and a unique quantized hard-sync vibrato effect! Furthermore, the independent “Wet” and “Dry” controls allow you to blend the all-analog input signal with the all-digital affected signal, making the Arpanoid useful for anything from subtle ambient tone clusters to a bombastic polyphonic flourish, and the ability to use the Arpanoid fully wet makes it great for use in the studio! Patch it on inserts! Try it on vocals! Synths! Drum machines! Use it on sends! Go nuts, (lady)dude.\u003c\/p\u003e\n\u003cp\u003eEarthquaker Devices suggests treating the Arpanoid like a new instrument and taking some time to get to know and love it. Once you understand how the Arpanoid will work for you, you and your device will live a long, fulfilling, happy life of mutual musical enjoyment.\u003c\/p\u003e\n\u003cp\u003eThe Arpanoid is true-bypass, and built one-at-a-time by a bunch of glowing orbs in the parallel universe of Akron, Ohio, USA.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eControls:\u003c\/p\u003e\n\u003cp\u003eWet: Level control for the effect signal. Unity is around noon.\u003c\/p\u003e\n\u003cp\u003eDry: Level control for the dry signal. Unity is around noon.\u003c\/p\u003e\n\u003cp\u003eRate: Adjusts the speed of the sequence.\u003c\/p\u003e\n\u003cp\u003eStep: Selects how many notes there are in the sequence.\u003c\/p\u003e\n\u003cp\u003eUp\/Up-Down\/Down Toggle: Switch to control the direction of the sequence. All the way left is up, the sequence will continually repeat going up. In the middle is up\/down, the sequence will continually repeat going up then back down. All the way right is down, the signal will continually repeat going down.\u003c\/p\u003e\n\u003cp\u003eMode: 8 position selector switch to choose the octave and key:\u003c\/p\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003e1: Major: -1 octave to root.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003e2: Major: root to +1 octave.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003e3: Major: -1 octave through +1\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003e4: Major: Random pattern\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003e5: Minor: -1 octave to root.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003e6: Minor: root to +1 octave.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003e7: Minor: -1 octave through +1\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003e8: Minor: Random pattern\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003eMeasures:\u003c\/p\u003e\n\u003cp\u003e4.75″ x 2.50″ x. 2.25″ with knobs\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePower:\u003c\/p\u003e\n\u003cp\u003eThe Arpanoid should be powered a standard 9-volt DC power supply with a 2.1mm negative center barrel. They always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. Do not run at higher voltages!\u003c\/p\u003e\n\u003cp\u003eCurrent Draw: 55mA\u003c\/p\u003e\n\u003cp\u003eInput Impedance: 1M\u003c\/p\u003e\n\u003cp\u003eOutput Impedance: \u0026lt;1K\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eFlexi-Switching:\u003c\/p\u003e\n\u003cp\u003eThis device features Flexi-Switch Technology on the Gain and Boost switches! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor momentary operation, hold the footswitch down for as long as you’d like to use the effect. Once you release the switch the effect will be bypassed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSince the switching is relay based, it requires power to pass signal.\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":41137622057138,"sku":"ACEARARPANOIDV2F2","price":257.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/products\/1_71a825f2-2355-4d14-a518-dc7d0177b43e.png?v=1633953768"},{"product_id":"new-earthquaker-devices-avalanche-run-v2-delay-reverb-guitar-effects-pedal","title":"New Earthquaker Devices Avalanche Run V2 Delay Reverb Guitar Effects Pedal","description":"\u003cp\u003eThe Avalanche Run is a dreamy stereosonic exploratory multi-tool that includes up to 2 seconds of delay time, reverse delay, tap tempo with subdivision control, switchable true bypass or buffered bypass with 5 different tail lengths (including a sound-on-sound style lo-fi looping mode) and an assignable expression control that maps the expression jack to a control of your choice, including the toggle! The delay section allows tweaking from tape emulation to bucket brigade styles with a twist of the wide-range Tone control. The cavernous, plate-style reverb has just a touch of modulation similar to the one found in our precious Dispatch Master only more lush with an adjustable Decay. Otherworldly reverse delay and dynamic swelling reverb settings are accessible through a 3-way toggle switch. And that's just the beginning...\u003c\/p\u003e\n\u003cp\u003eControls:\u003c\/p\u003e\n\u003cp\u003e1. Time: This controls the delay time and goes from 0ms to just under 2000ms.\u003cbr\u003e2. Repeats: Controls the regeneration of the delay, from zero repeats to near infinite.\u003cbr\u003e3. Tone: Controls the tone for the delay line only. Roll off highs to the left, roll off lows to the right and get a flat response in the middle.\u003cbr\u003e4. Mix: This is the volume control for the delay line. This blends in the wet with dry until 1 o'clock, 1 o'clock to 3 o'clock boosts the wet signal over the dry and 3 o'clock up brings down dry until it is fully wet when all the way up.\u003cbr\u003e5. Expression Jack Assign Switch: Use this switch to map the expression jack to one of the assigned controls.\u003cbr\u003eDecay: Controls the reverb decay length\u003cbr\u003eR Mix: Controls the reverb mix\u003cbr\u003eTime: This takes over for the delay time control and is DRASTICALLY different than the interface control. Using the expression pedal to control the time will give you all kinds of wild effects that can not be achieved by turning the knob.\u003cbr\u003eRepeats: Controls the delay repeats\u003cbr\u003eD Mix: Controls the delay mix\u003cbr\u003eToggle: This takes over for the toggle switch and will cross fade from forward delay in heel down position to reverse delay in toe down position.\u003cbr\u003e6. Ratio Selector Switch: Selects delay subdivisions when time is set by the \"Tap\" switch.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\/1: Quarter Note\u003c\/li\u003e\n\u003cli\u003e3\/4: Dotted 8th\u003c\/li\u003e\n\u003cli\u003e2\/3: Quarter Note Triplet\u003c\/li\u003e\n\u003cli\u003e1\/2: 8th Note\u003c\/li\u003e\n\u003cli\u003e1\/3: 8th Note Triplet\u003c\/li\u003e\n\u003cli\u003e1\/4: 16th Note\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e7. Decay: Controls the decay length of the reverb, short decay counterclockwise, long cavernous decay clockwise.\u003cbr\u003e8. Toggle Switch (Mode Selector)\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNormal: This is the \"standard\" delay and reverb mode\u003c\/li\u003e\n\u003cli\u003eReverse: This is reverse delay mode with \"standard\" reverb\u003c\/li\u003e\n\u003cli\u003eSwell: This is the volume swell mode\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e9. Mix: This is the volume control for the reverb. Blends in the wet with dry until 1 o'clock, 1 o'clock to 3 o'clock boosts the wet signal over the dry and 3 o'clock up brings down dry until it is fully wet when all the way up.\u003c\/p\u003e\n\u003cp\u003eTech Specs:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 4.65 x 4.15 x 2.25 in. (118 x 105 x 57 mm) with knobs\u003c\/li\u003e\n\u003cli\u003eCurrent Draw: 410 mA\u003c\/li\u003e\n\u003cli\u003eInput Impedance: 1 MΩ\u003c\/li\u003e\n\u003cli\u003eOutput Impedance: 100 Ω\u003c\/li\u003e\n\u003cli\u003eS\/N Ratio: 115dB typical\u003c\/li\u003e\n\u003cli\u003e24-bit 96kHz A\/D \u0026amp; D\/A converters\u003c\/li\u003e\n\u003cli\u003eAll analog dry signal path\u003c\/li\u003e\n\u003cli\u003eAll digital wet signal path with 20Hz – 20kHz frequency response\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eExpression Jack\u003cbr\u003eThe expression jack is located on the west side of the pedal. It is a TRS jack with the tip acting as the wiper.\u003c\/p\u003e\n\u003cp\u003eFlexi-Switch® Technology\u003cbr\u003eThis device features Flexi-Switch® Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.\u003cbr\u003eFor standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.\u003cbr\u003eFor momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.\u003cbr\u003eSince the switching is relay based, it requires power to pass signal.\u003c\/p\u003e\n\u003cp\u003ePower\u003cbr\u003eFor best results, please use the included 9v center-negative 1-amp DC power supply.\u003c\/p\u003e\n\u003cp\u003ePCBs populated by a combination of artificial and human intelligence in the Akron, Ohio of America. Each and every Avalanche Run is completely assembled, wired and tested by total human beans in the tiny tundra town of Akron, Ohio.\u003c\/p\u003e","brand":"Earthquaker Devices","offers":[{"title":"Default Title","offer_id":41137702076594,"sku":"ACEARAVALANCHV2","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/products\/57_7d10a6c7-2362-4786-bee1-5faa1e66a3ee.jpg?v=1633954525"},{"product_id":"new-earthquaker-devices-data-corrupter-modulated-monophonic-harmonizing-pedal","title":"New Earthquaker Devices Data Corrupter Modulated Monophonic Harmonizing Pedal","description":"\u003cp\u003eThe Data Corrupter is a monophonic analog harmonizing PLL with modulation. It takes your input signal and brutally amplifies it into a crushing square wave fuzz tone that is then multiplied, divided and modulated to create a wild, yet repeatable, three-voice guitar synthesizer.\u003c\/p\u003e\n\u003cp\u003eThe Master Oscillator is the central nervous system at the heart of the Data Corrupter's cyberpunk hive mind. The three-position switch on the Master Oscillator control panel labeled Root feeds your input to the Data Corrupter's signal harvester in its original octave (Unison), one octave down (-1) or two octaves down (-2). Use the Master Oscillator's Root switch to fine tune the Data Corrupter's tracking response for maximum compatibility with your preferred instrument and frequency register. Once you've chosen your input octave, the Data Corrupter will perform its calculations and spit out a synthesized frequency, the octave and\/or interval of which may be selected via the Master Oscillator's eight-position rotary switch. The Voice Mixer's Oscillator control adjusts the Master Oscillator blend.\u003c\/p\u003e\n\u003cp\u003eThe Frequency Modulator applies pitch-bend modulation to the Master Oscillator. In Glide mode, you'll hear a smooth portamento as each note slides into the next. In Vibrato mode the pitch modulates up and down for a retro sci-fi laser effect.\u003c\/p\u003e\n\u003cp\u003eThe Subharmonic assimilates the input signal into one of eight lower octave programs between one and three octaves below the original. Adjust the Voice Mixer's Subharmonic control to set the lower octave volume.\u003c\/p\u003e\n\u003cp\u003eControls:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaster Oscillator – Root switch (Unison, -1, -2 octaves), 8-position rotary interval select\u003c\/li\u003e\n\u003cli\u003eFrequency Modulator – Glide and Vibrato modes with Rate control\u003c\/li\u003e\n\u003cli\u003eSubharmonic – Root switch (Unison or Oscillator), 8-position rotary interval select\u003c\/li\u003e\n\u003cli\u003eVoice Mixer – Square, Subharmonic, and Oscillator blend controls, master Level\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTracking: Place close to front of signal chain, before delay, reverb or modulation. Neck pickup recommended for best tracking.\u003c\/p\u003e\n\u003cp\u003eSwitching: True bypass via electronic relay. Audio will not pass without power.\u003c\/p\u003e\n\u003cp\u003ePower: Standard 9V DC, 2.1mm negative center barrel. 25mA current draw.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 5.65″ x 4.65″ x 2.25″ with knobs\u003c\/li\u003e\n\u003cli\u003eInput impedance: 1M\u003c\/li\u003e\n\u003cli\u003eOutput impedance: 1K\u003c\/li\u003e\n\u003cli\u003eCurrent Draw: 25mA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHandbuilt in Akron, Ohio, USA.\u003c\/p\u003e","brand":"Earthquaker Devices","offers":[{"title":"Default Title","offer_id":41137763156146,"sku":"ACEARDATACRRPTR","price":259.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/products\/57_5130fde8-7c3c-496e-b2a1-f7caff83a6eb.jpg?v=1633955368"},{"product_id":"new-earthquaker-devices-aqueduct-vibrato-guitar-effects-pedal","title":"New Earthquaker Devices Aqueduct Vibrato Guitar Effects Pedal","description":"\u003cp\u003eAqueduct uses a short delay line with eight modulation modes to deliver gentle amp-like rolling pitch-wobbles, steady kosmiche pulsations, rapid trills, slimy sonic squiggles, whammy bar wiggles, pitch bends, and anything else your pitch-warped brain can picture in your murky mind’s eye.\u003c\/p\u003e\n\u003cp\u003eWith eight modulation methods to choose, Aqueduct offers a variety of pitch-shifting vibrato tones adaptable to nearly any musical situation. Sine, Triangle, Ramp, and Square modes provide tried-and-true pitch modulation for players wanting to add subtle and organic textures to their music. Random mode introduces a “warped record” effect at low settings and rolls the dice on an unpredictable assortment of greasy pitch-bends as the Depth is increased. For players on the hunt for a dynamic and touch-sensitive Vibrato experience, Aqueduct’s Envelope modes allow for interactive control over the Depth, Rate, and pitch of the vibrato by simply playing harder or softer.\u003c\/p\u003e\n\u003cp\u003eEnvelope-Controlled Pitch mode (Env P) is equipped with a wet\/dry blend expanding the tonal possibilities beyond vibrato to include chorus, flanger, and tactile tremolo bar-like pitch bends. We’ve lovingly nicknamed it “the My Bloody Valentine setting.”\u003c\/p\u003e\n\u003cp\u003eAqueduct’s intuitive control set make it easy for pedal novices and tap-dancing pedalheads alike to dial in swampy vintage-inspired vibrato, synthesizer-like sonar pulses, touch-sensitive pitch modulation, and more. Rate adjusts the LFO speed which controls how quickly the pitch rises and falls. Depth controls the LFO amplitude, adjusting the intensity of the vibrato effect. The rotary switch labeled Mode selects between one of eight LFO waveshape and envelope combinations which drastically alter the character of the modulation.\u003c\/p\u003e\n\u003cp\u003eIt is also the latest pedal to feature EarthQuaker Devices proprietary Flexi-Switch™ feature which allows users to select between momentary and traditional latching-style switching in the moment and on the fly. For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass. For momentary operation, hold the footswitch down for as long as you’d like to use the effect. Once you release the switch the effect will be bypassed.\u003c\/p\u003e\n\u003cp\u003eAqueduct Vibrato will be available at EarthQuaker Devices dealers worldwide on August 29, 2018.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eAqueduct Vibrato:\u003c\/p\u003e\n\u003cp\u003eTrue pitch-shifting vibrato\u003c\/p\u003e\n\u003cp\u003eEasily conjure swampy vintage-inspired vibrato, synth-like sonar pulses, touch-sensitive pitch modulation, chorus, flanger, and tactile tremolo bar-like pitch bends from a single pedal\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eEight modulation modes:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSine: The smoothest and most subtle of all waveforms, sine waves are most commonly associated with classic amp-like vibrato.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTriangle: Triangle waves have a sharper rise and fall than sine waves with a more pronounced pitch bend at the peak of each LFO cycle.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRamp: Like a triangle wave with a twist. The Ramp waveform has a sharp sonar pulse followed by a rapid downward slope with a synthesizer-like sustain and release.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSquare: Square waves are the most rigid and abrupt of the waveforms. Rather than gliding smoothly between pitches, square waves produce an instant on-or-off transition between notes.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRandom: introduces a “warped record” effect at low settings and rolls the dice on an unpredictable assortment of greasy pitch-bends as the Depth is increased\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEnv D: Envelope-Controlled Depth mode. The waveshape is set to a sine wave, the speed of which may be adjusted using the Rate control. The Depth control sets the sensitivity of the envelope - the point at which the effect kicks in as you play. In this mode, your pick attack sets the intensity of the modulation. The harder you dig in, the more pronounced the effect.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEnv R: This is Envelope-Controlled Rate mode. In this mode, the input level (i.e. pick attack) controls the LFO rate. Play harder for faster modulation or lay low for slower modulation speeds. The Rate control adjusts the sensitivity of the envelope. Depth selects the LFO intensity.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEnv P: This is Envelope-Controlled Pitch mode, which we’ve lovingly nicknamed “The My Bloody Valentine setting.” If your instrument doesn’t have a tremolo bar, it does now. In this mode, the frequency modulation is controlled by the dynamics of your pick attack and not the LFO.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eFeatures \u0026amp; Specifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlexi-Switch™ allows for momentary and traditional latching-style switching\u003c\/li\u003e\n\u003cli\u003eTrue Bypass\u003c\/li\u003e\n\u003cli\u003eSilent relay-based switching\u003c\/li\u003e\n\u003cli\u003eAll-analog dry signal path\u003c\/li\u003e\n\u003cli\u003eAll-digital wet signal path\u003c\/li\u003e\n\u003cli\u003eLifetime guarantee\u003c\/li\u003e\n\u003cli\u003eCurrent Draw: 68mA\u003c\/li\u003e\n\u003cli\u003eInput Impedance: 1M Ohm\u003c\/li\u003e\n\u003cli\u003eOutput Impedance: \u0026lt;10K Ohm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEach and every Aqueduct is constructed with human hands in Akron, Ohio, USA.\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":41137770234034,"sku":"ACEARAQUEDUCT","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/products\/57_813628b8-4182-4722-98b0-3a8b1d33a3d8.jpg?v=1633955498"},{"product_id":"new-earthquaker-devices-organizer-v2-polyphonic-organ-emulator-machine-pedal","title":"New Earthquaker Devices Organizer V2 Polyphonic Organ Emulator Machine Pedal","description":"\u003cp\u003eIncludes two Fender Custom Shop Tweed 6 Inch Patch Cables and a Fender Custom Shop Tweed 10 Foot Instrument Cable!\u003c\/p\u003e\n\u003cp\u003eOrganizer V2 - Polyphonic Organ Emulator\u003c\/p\u003e\n\u003cp\u003eThe Organizer is a polyphonic organ emulator designed to mimic the organ tones of yesteryear crossed with the highly unique \"Guitorgan\". It has a warm and very analog feel with a hint of Leslie warble that is unlike other modern octave shifters. It is simple to dial in and tracks chords as well as single notes perfectly all over the neck on both guitar and bass. Not only can the Organizer be used on strings, it has been widely used on everything from vocals and synths to horns and drums.\u003c\/p\u003e\n\u003cp\u003eIf it makes sound, the Organizer can handle it! The Organizer uses a mix of analog and DSP circuitry with true bypass switching and an all analog dry signal path.\u003c\/p\u003e\n\u003cp\u003eIt is made by hand, one at a time in dirty Akron, Ohio.\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\"Lag\" control delays wet signal for polyrhythmic octave effects\u003c\/li\u003e\n\u003cli\u003e\"Choir\" control acts as octave regeneration control for two octaves up\/down\u003c\/li\u003e\n\u003cli\u003eImproved circuitry for better performance and lower noise\u003c\/li\u003e\n\u003cli\u003eTrue-bypass\u003c\/li\u003e\n\u003cli\u003eSilent soft-touch switching\u003c\/li\u003e\n\u003cli\u003eAll-analog dry signal path\u003c\/li\u003e\n\u003cli\u003eMade by hand, one at a time in dirty Akron, Ohio.\u003c\/li\u003e\n\u003cli\u003eLifetime guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eControls:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUp: Level control for the octave up.\u003c\/li\u003e\n\u003cli\u003eDown: Level control for the octave down.\u003c\/li\u003e\n\u003cli\u003eChoir: This control takes a mix of the octave up and octave down setting and regenerates it. The end result is an additional 2 octaves up, 2 octaves down and direct signal with a slight delay that adds a \"church organ\" like feel. This control only works if the octave up and octave down are in use.\u003c\/li\u003e\n\u003cli\u003eDirect: Level control for the analog dry signal.\u003c\/li\u003e\n\u003cli\u003eTone: Rolls off the high end as you dial it counter-clockwise.\u003c\/li\u003e\n\u003cli\u003eLag: Delay control for the wet signal. Full counter-clockwise is minimal delay, delay time increases as it rotates clockwise.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMeasures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 5\/8″ x 2 1\/2″ x 2.25″ with knobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePower (Not Included):\u003c\/p\u003e\n\u003cp\u003eA standard 9 volt DC power supply with a negative center 2.1mm barrel, no battery option. We do not recommend using this pedal on a daisy chain. Please use a dedicated power supply or isolated output from a multiple tap power supply for best performance.\u003c\/p\u003e\n\u003cp\u003eNotes:\u003c\/p\u003e\n\u003cp\u003eThe Organizer has an output gain stage with no master control. When it's idle, even with all knobs at zero, there will be about as much \"white noise\" as an average overdrive pedal with its gain at zero and the level set to unity. A minimal amount while idle is normal but it will not be noticeable during play. The sound will be more apparent in front of a gained up amp or other dirt\/gain\/boost pedals.\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":41137771413682,"sku":"ACEARORGANIZRV2F2","price":207.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/products\/1_c0225071-080c-4814-9286-6c841d93d75d.png?v=1633955545"},{"product_id":"new-earthquaker-devices-organizer-v2-polyphonic-organ-emulator-machine-pedal-1","title":"New Earthquaker Devices Organizer V2 Polyphonic Organ Emulator Machine Pedal","description":"\u003cp\u003eOrganizer V2 - Polyphonic Organ Emulator\u003c\/p\u003e\n\u003cp\u003eThe Organizer is a polyphonic organ emulator designed to mimic the organ tones of yesteryear crossed with the highly unique “Guitorgan”. It has a warm and very analog feel with a hint of Leslie warble that is unlike other modern octave shifters. It is simple to dial in and tracks chords as well as single notes perfectly all over the neck on both guitar and bass. Not only can the Organizer be used on strings, it has been widely used on everything from vocals and synths to horns and drums.\u003c\/p\u003e\n\u003cp\u003eIf it makes sound, the Organizer can handle it! The Organizer uses a mix of analog and DSP circuitry with true bypass switching and an all analog dry signal path.\u003c\/p\u003e\n\u003cp\u003eIt is made by hand, one at a time in dirty Akron, Ohio.\u003c\/p\u003e\n\u003cp\u003e \u003cbr\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e“Lag” control delays wet signal for polyrhythmic octave effects\u003c\/li\u003e\n\u003cli\u003e“Choir” control acts as octave regeneration control for two octaves up\/down\u003c\/li\u003e\n\u003cli\u003eImproved circuitry for better performance and lower noise*\u003c\/li\u003e\n\u003cli\u003eTrue-bypass\u003c\/li\u003e\n\u003cli\u003eSilent soft-touch switching*\u003c\/li\u003e\n\u003cli\u003eAll-analog dry signal path\u003c\/li\u003e\n\u003cli\u003eMade by hand, one at a time in dirty Akron, Ohio.\u003c\/li\u003e\n\u003cli\u003eLifetime guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eControls:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUp: Level control for the octave up.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDown: Level control for the octave down.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eChoir: This control takes a mix of the octave up and octave down setting and regenerates it. The end result is an additional 2 octaves up, 2 octaves down and direct signal with a slight delay that adds a “church organ” like feel. This control only works if the octave up and octave down are in use.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDirect: Level control for the analog dry signal.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTone: Rolls off the high end as you dial it counter-clockwise.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLag: Delay control for the wet signal. Full counter-clockwise is minimal delay, delay time increases as it rotates clockwise.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eMeasures:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 5\/8″ x 2 1\/2″ x 2.25″ with knobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003ePower (Not Included):\u003c\/p\u003e\n\u003cp\u003eA standard 9 volt DC power supply with a negative center 2.1mm barrel, no battery option. We do not recommend using this pedal on a daisy chain. Please use a a dedicated power supply or isolated output from a multiple tap power supply for best performance.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eNotes:\u003c\/p\u003e\n\u003cp\u003eThe Organizer has an output gain stage with no master control. When it’s idle, even with all knobs at zero, the will be about as much “white noise” as an average overdrive pedal with it’s gain at zero and the level set to unity. A minimal amount while idle is normal but it will not be noticeable during play. The sound will be more apparent in front of a gained up amp or other dirt\/gain\/boost pedals.\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":41137772101810,"sku":"ACEARORGANIZRV2","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/products\/57_290378d6-e434-48de-9533-a3b425ebd9b3.jpg?v=1633955576"},{"product_id":"new-earthquaker-devices-swiss-things-pedalboard-reconciler-effects-pedal","title":"New Earthquaker Devices Swiss Things Pedalboard Reconciler Effects Pedal","description":"\u003cp\u003eSwiss Things™ combines two true-bypass Flexi-Switch™ enabled effects loops, a Flexi-Switch™ AB-Y box with transformer isolation between outputs, a buffered tuner output, 20dB of clean boost with adjustable gain, an expression pedal output for volume control and a quiet, high headroom output buffer into a compact pedalboard-friendly signal routing junction box that lives at the top-right corner of your pedalboard and really ties your rig together without any signal loss.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThis is what you can do with it:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse as many pedals as you’d like without tone-suck\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eQuickly and easily bypass or engage all of your effects with one click\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUse Flexi-Switch™ Technology with every pedal in your setup\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEliminate volume pedal tone-suck by using any expression pedal to control volume\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUse multiple amps without phase issues, ground loops, or extra noise\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTidy up your rig, shorten cable runs, and reduce tone loss by keeping all inputs and outputs in one location\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Earthquaker Devices","offers":[{"title":"Default Title","offer_id":41137813487794,"sku":"ACEARSWISSTHING","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/products\/57_bede636f-9714-406a-847d-1e5751aa3f46.jpg?v=1633956710"},{"product_id":"new-earthquaker-devices-bit-commander-v2-monophonic-analog-synthesizer-pedal","title":"New Earthquaker Devices Bit Commander V2 Monophonic Analog Synthesizer Pedal","description":"\u003cp\u003e\u003cstrong\u003eIncludes a Fender Custom Shop Tweed 10-foot instrument cable and a Fender Custom Shop Tweed patch cable\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Bit Commander is a monophonic analog guitar synthesizer with four octaves of vintage square wave synth tones. Its no-nonsense interface makes it easy to add or subtract octaves to create a wide variety of sounds without having to dial in envelopes or oscillators. Ripping sub-octave thump, pulsing octave down, a lightly squared base tone and a swelling transformer based octave up all join together to make a single guitar sound like an army of olde tyme synths.\u003c\/p\u003e\n\u003cp\u003eLike all analog octave effects, there are some basic rules to follow that will get you the most enjoyment from your Bit Commander. Use the neck pickup and play single notes. The best tracking occurs from the 7th fret up on all the strings. Below the 7th will still track but there will be occasional glitches and stutters. The lower the note, the harder it is for the Bit Commander to register. The use of bass and lower registers on keyboards will yield unexpected, sometimes pleasing, sometimes disgusting results. These are not mistakes or flaws, it is the nature of analog octaves.\u003c\/p\u003e\n\u003cp\u003eBit Commander V2 Features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFour voice analog octave synthesizer\u003c\/li\u003e\n\u003cli\u003eSub-octave thump\u003c\/li\u003e\n\u003cli\u003ePulsing octave down\u003c\/li\u003e\n\u003cli\u003eLightly squared base tone\u003c\/li\u003e\n\u003cli\u003eSwelling transformer based octave up\u003c\/li\u003e\n\u003cli\u003eFilter control\u003c\/li\u003e\n\u003cli\u003eSilent soft-touch switching\u003c\/li\u003e\n\u003cli\u003eAll-analog dry signal path\u003c\/li\u003e\n\u003cli\u003eHand made one at a time in the republic of Akron, Ohio\u003c\/li\u003e\n\u003cli\u003eLifetime guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eControls:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSub: Two octaves down level\u003c\/li\u003e\n\u003cli\u003eDown 1: One octave down level\u003c\/li\u003e\n\u003cli\u003eUp 1: One octave up level\u003c\/li\u003e\n\u003cli\u003eBase: Squared input signal level\u003c\/li\u003e\n\u003cli\u003eLevel: Master volume\u003c\/li\u003e\n\u003cli\u003eFilter: Tone control, more highs clockwise, more warmth counter-clockwise\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMeasures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 5\/8\" x 2 1\/2\" x 2.25\" with knobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePower (Not Included):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA standard 9-volt DC power supply with a negative center 2.1mm barrel, no battery option.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Earthquaker Devices","offers":[{"title":"Default Title","offer_id":41137832034482,"sku":"ACEARBITCMMNDV2F0","price":209.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/products\/57_f446c431-fe37-4142-9864-5cdea6b6e662.jpg?v=1633957227"},{"product_id":"new-earthquaker-devices-ghost-echo-v3-reverb-delay-guitar-effects-pedal","title":"New Earthquaker Devices Ghost Echo V3 Spring Reverb Guitar Effects Pedal","description":"\u003cp\u003eVintage Voiced Reverb:\u003c\/p\u003e\n\u003cp\u003eYou hear that EVP, bud? It’s the all new, extra spook-tacular, Ghost Echo™ calling out from beyond the void! The Ghost Echo is Earthquaker's spooky take on the haunted* amp-top spring reverberation units of yesteryear. This creepy analog\/digital spring reverb emulation machine boasts a terrifying 30ms – 150ms of pre-delay, controllable via the Attack knob, for everything from a quick rockabilly slapback to viscous pools of ectoplasmic reverberations. When playing staccato, you’ll hear the tortured trails of the reverb, resulting in more of a slapback or echo sound. Legato playing will reveal a massive ambient “depth” that fattens up the sound – and look out, it’s right behind you!\u003c\/p\u003e\n\u003cp\u003ePhew, that was close. The Dwell control sets the length and thickness of the decay, which is to say that it controls how long the disembodied spirits of notes no longer with us float through the ether. At the maximum setting it will descend into an infinite loop of self-oscillation. The Depth sets the intensity of the reverb, which you probably know as the wet\/dry mix, but they like to think of it more as how scary the overall effect is.\u003c\/p\u003e\n\u003cp\u003eThe Ghost Echo is true bypass and built one at a time by a team of friendly ghosts in the never-ending hall of funhouse mirrors that is Akron, Ohio, USA.\u003c\/p\u003e\n\u003cp\u003e*Not actually haunted. Or are they?\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eV3 UPDATES - JUNE 2017:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUpgraded op-amps for better performance and lower noise\u003c\/li\u003e\n\u003cli\u003eStronger reverb signal with 2x the output\u003c\/li\u003e\n\u003cli\u003eRecalibrated Dwell control capable of self-oscillations when all the way up\u003c\/li\u003e\n\u003cli\u003eNew artwork\u003c\/li\u003e\n\u003cli\u003eSilent relay-based switching\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eControls:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAttack: Adjusts the length of the pre-delay, from 30ms at minimum to about 150ms at maximum. When the Dwell is set to self-oscillate, this will change the pitch of the oscillations.\u003c\/li\u003e\n\u003cli\u003eDwell: Adjusts the length of the decay. This will start to self-oscillate around 3 O’Clock, the pitch of the oscillations can be changed by turning the Attack control.\u003c\/li\u003e\n\u003cli\u003eDepth: Mixes in the wet signal with the dry, unity is around noon and everything after is boosted.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eMeasures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4.625″ x 2.5″ x 2.25″ with knobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003ePower:\u003c\/p\u003e\n\u003cp\u003eThe Ghost Echo should be powered by a standard 9-volt DC power supply with a 2.1mm negative center barrel. Earthquaker Devices always recommends pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power.\u003c\/p\u003e\n\u003cp\u003eSwitching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. Do not run at higher voltages!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInput Impedance: 10M\u003c\/li\u003e\n\u003cli\u003eOutput Impedance: 1K\u003c\/li\u003e\n\u003cli\u003eCurrent Draw: 80 mA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Earthquaker Devices","offers":[{"title":"Default Title","offer_id":41137832886450,"sku":"ACEARGHOSTV3","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/products\/Ghost-Echo.jpg?v=1660678034"},{"product_id":"new-earthquaker-devices-ghost-echo-v3-reverb-delay-guitar-effects-pedal-1","title":"New Earthquaker Devices Ghost Echo V3 Spring Reverb Guitar Effects Pedal","description":"\u003cp\u003e\u003cstrong\u003eIncludes a Fender Custom Shop Tweed 10 ft instrument cable and a Fender Custom Shop Tweed 6 in patch cable\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eVintage Voiced Reverb:\u003c\/p\u003e\n\u003cp\u003eYou hear that EVP, bud? It’s the all new, extra spook-tacular, Ghost Echo™ calling out from beyond the void! The Ghost Echo is Earthquaker's spooky take on the haunted* amp-top spring reverberation units of yesteryear. This creepy analog\/digital spring reverb emulation machine boasts a terrifying 30ms – 150ms of pre-delay, controllable via the Attack knob, for everything from a quick rockabilly slapback to viscous pools of ectoplasmic reverberations. When playing staccato, you’ll hear the tortured trails of the reverb, resulting in more of a slapback or echo sound. Legato playing will reveal a massive ambient “depth” that fattens up the sound – and look out, it’s right behind you!\u003c\/p\u003e\n\u003cp\u003ePhew, that was close. The Dwell control sets the length and thickness of the decay, which is to say that it controls how long the disembodied spirits of notes no longer with us float through the ether. At the maximum setting it will descend into an infinite loop of self-oscillation. The Depth sets the intensity of the reverb, which you probably know as the wet\/dry mix, but they like to think of it more as how scary the overall effect is.\u003c\/p\u003e\n\u003cp\u003eThe Ghost Echo is true bypass and built one at a time by a team of friendly ghosts in the never-ending hall of funhouse mirrors that is Akron, Ohio, USA.\u003c\/p\u003e\n\u003cp\u003e*Not actually haunted. Or are they?\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eV3 UPDATES - JUNE 2017:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUpgraded op-amps for better performance and lower noise\u003c\/li\u003e\n\u003cli\u003eStronger reverb signal with 2x the output\u003c\/li\u003e\n\u003cli\u003eRecalibrated Dwell control capable of self-oscillations when all the way up\u003c\/li\u003e\n\u003cli\u003eNew artwork\u003c\/li\u003e\n\u003cli\u003eSilent relay-based switching\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eControls:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAttack: Adjusts the length of the pre-delay, from 30ms at minimum to about 150ms at maximum. When the Dwell is set to self-oscillate, this will change the pitch of the oscillations.\u003c\/li\u003e\n\u003cli\u003eDwell: Adjusts the length of the decay. This will start to self-oscillate around 3 O’Clock, the pitch of the oscillations can be changed by turning the Attack control.\u003c\/li\u003e\n\u003cli\u003eDepth: Mixes in the wet signal with the dry, unity is around noon and everything after is boosted.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eMeasures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4.625″ x 2.5″ x 2.25″ with knobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003ePower:\u003c\/p\u003e\n\u003cp\u003eThe Ghost Echo should be powered by a standard 9-volt DC power supply with a 2.1mm negative center barrel. Earthquaker Devices always recommends pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power.\u003c\/p\u003e\n\u003cp\u003eSwitching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. Do not run at higher voltages!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInput Impedance: 10M\u003c\/li\u003e\n\u003cli\u003eOutput Impedance: 1K\u003c\/li\u003e\n\u003cli\u003eCurrent Draw: 80 mA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Earthquaker Devices","offers":[{"title":"Default Title","offer_id":41137833050290,"sku":"ACEARGHOSTV3F0","price":207.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/products\/1_63cba724-3f83-471f-8fc4-5220ea98fc06.png?v=1633957255"},{"product_id":"new-earthquaker-devices-hummingbird-v4-tremolo-effects-pedal","title":"New Earthquaker Devices Hummingbird V4 Tremolo Effects Pedal","description":"\u003cp\u003eRepeat Percussions:\u003c\/p\u003e\n\u003cp\u003eWelcome to your new Hummingbird™ Repeat Percussion tremolo!\u003c\/p\u003e\n\u003cp\u003eThe Hummingbird is a choppy, sawtooth tremolo modeled on the vintage “repeat percussion” unit and similar to those found in old Valco and Vox amplifiers. It is capable of producing everything from classic “50’s style” shimmering tremolo to a synthy, delay-like chop that turns your signal into a burst of short pings and on through to near ring modulation speeds. Simply choosing between modes 1 (slow), 2 (mid-tempo) or 3 (fast) and adjusting the rate and depth controls will unlock a whole new world of amplitude modulation at your feet.\u003c\/p\u003e\n\u003cp\u003eThe Rate is also expression pedal accessible to allow instant changes on the fly. Using an expression pedal opens up the possibility of true random amplitude modulation!\u003c\/p\u003e\n\u003cp\u003eIn addition to the modulation, the Hummingbird has plenty of clean gain on-tap allowing you to either boost or cut the signal using the level control. If the Depth is turned to zero, the Hummingbird will become a JFET clean boost!\u003c\/p\u003e\n\u003cp\u003eThe Hummingbird is all analog, true bypass and handmade one at a time on a gilded cloud in Akron, Ohio.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eControls:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRate: This adjusts the speed of the oscillator. Faster clockwise, slower counter clockwise.\u003c\/li\u003e\n\u003cli\u003eDepth: This adjusts how much the oscillator affects the signal. All the way clockwise produces a full chop, all the way counter clockwise produces no chop and the Hummingbird can be used as a simple JFET booster.\u003c\/li\u003e\n\u003cli\u003eLevel: Adjusts the output volume\u003c\/li\u003e\n\u003cli\u003eMode: Three way toggle switch which selects the range of the oscillator. Mode 1 is slow, mode 2 is mid tempo and mode 3 is fast.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eExpression Jack:\u003c\/p\u003e\n\u003cp\u003eUse an expression pedal to adjust the rate with your foot! When an expression pedal is in use the Rate control is defeated. Earthquaker recommends the Moog EP-2 expression pedal.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eFlexi-Switching:\u003c\/p\u003e\n\u003cp\u003eThis device features Flexi-Switch™ Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eFor standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eFor momentary operation, hold the footswitch down for as long as you’d like to use the effect. Once you release the switch the effect will be bypassed.\u003c\/p\u003e\n\u003cp\u003eSince the switching is relay based, it requires power to pass signal.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eMeasures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4.75″ x 2.50″ x 2.25″ with knobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003ePower:\u003c\/p\u003e\n\u003cp\u003eThe Hummingbird should be powered by a standard 9 volt DC power supply with a 2.1mm negative center barrel. Earthquaker Devices always recommends pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power.\u003c\/p\u003e\n\u003cp\u003eSwitching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise.\u003c\/p\u003e\n\u003cp\u003eCurrent Draw is 10mA.\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":41137833377970,"sku":"ACEARHMMNGBRDV4","price":179.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/products\/57_35a6cbed-9a05-46e3-9098-cfa0e7e2c8b4.jpg?v=1633957269"},{"product_id":"new-earthquaker-devices-hummingbird-v4-tremolo-effects-pedal-1","title":"New Earthquaker Devices Hummingbird V4 Tremolo Effects Pedal","description":"\u003cp\u003e\u003cstrong\u003eIncludes a Fender Custom Shop Tweed 10 ft instrument cable and a Fender Custom Shop Tweed 6 in patch cable\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRepeat Percussions:\u003c\/p\u003e\n\u003cp\u003eWelcome to your new Hummingbird™ Repeat Percussion tremolo!\u003c\/p\u003e\n\u003cp\u003eThe Hummingbird is a choppy, sawtooth tremolo modeled on the vintage “repeat percussion” unit and similar to those found in old Valco and Vox amplifiers. It is capable of producing everything from classic “50’s style” shimmering tremolo to a synthy, delay-like chop that turns your signal into a burst of short pings and on through to near ring modulation speeds. Simply choosing between modes 1 (slow), 2 (mid-tempo) or 3 (fast) and adjusting the rate and depth controls will unlock a whole new world of amplitude modulation at your feet.\u003c\/p\u003e\n\u003cp\u003eThe Rate is also expression pedal accessible to allow instant changes on the fly. Using an expression pedal opens up the possibility of true random amplitude modulation!\u003c\/p\u003e\n\u003cp\u003eIn addition to the modulation, the Hummingbird has plenty of clean gain on-tap allowing you to either boost or cut the signal using the level control. If the Depth is turned to zero, the Hummingbird will become a JFET clean boost!\u003c\/p\u003e\n\u003cp\u003eThe Hummingbird is all analog, true bypass and handmade one at a time on a gilded cloud in Akron, Ohio.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eControls:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRate: This adjusts the speed of the oscillator. Faster clockwise, slower counter clockwise.\u003c\/li\u003e\n\u003cli\u003eDepth: This adjusts how much the oscillator affects the signal. All the way clockwise produces a full chop, all the way counter clockwise produces no chop and the Hummingbird can be used as a simple JFET booster.\u003c\/li\u003e\n\u003cli\u003eLevel: Adjusts the output volume\u003c\/li\u003e\n\u003cli\u003eMode: Three way toggle switch which selects the range of the oscillator. Mode 1 is slow, mode 2 is mid tempo and mode 3 is fast.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eExpression Jack:\u003c\/p\u003e\n\u003cp\u003eUse an expression pedal to adjust the rate with your foot! When an expression pedal is in use the Rate control is defeated. Earthquaker recommends the Moog EP-2 expression pedal.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eFlexi-Switching:\u003c\/p\u003e\n\u003cp\u003eThis device features Flexi-Switch™ Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eFor standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eFor momentary operation, hold the footswitch down for as long as you’d like to use the effect. Once you release the switch the effect will be bypassed.\u003c\/p\u003e\n\u003cp\u003eSince the switching is relay based, it requires power to pass signal.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eMeasures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4.75″ x 2.50″ x 2.25″ with knobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003ePower:\u003c\/p\u003e\n\u003cp\u003eThe Hummingbird should be powered by a standard 9 volt DC power supply with a 2.1mm negative center barrel. Earthquaker Devices always recommends pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power.\u003c\/p\u003e\n\u003cp\u003eSwitching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise.\u003c\/p\u003e\n\u003cp\u003eCurrent Draw is 10mA.\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":41137833607346,"sku":"ACEARHMMNGBRDV4F0","price":187.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/products\/1_59710ea9-7ac4-4856-8080-7b72368acd86.png?v=1633957282"},{"product_id":"new-earthquaker-devices-palisades-v2-mega-ultimate-maximum-overdrive-pedal","title":"New Earthquaker Devices Palisades V2 Mega Ultimate Maximum Overdrive Pedal","description":"\u003cp\u003eMega Ultimate Overdrive:\u003c\/p\u003e\n\u003cp\u003eThe Palisades® is something Earthquaker Devices said they would never do… an overdrive based on the legendary TS808! Gasp! The horror! Another tubes creamer?? In 2014?? Really?? After loads of requests they finally buckled. They ran tests with every popular clone on the market as well as several vintage originals, compared, contrasted and took loads of notes. It was exhausting but informative. In the end, they threw it all away, used their ears and came up with what they feel is the most versatile relative of the 808 available today.\u003c\/p\u003e\n\u003cp\u003eWith 6 different clipping voices, 5 bandwidth settings and 2 gain channels you will be hard-pressed to not find a setting that will wipe every mid-boosting overdrive off your board. The clipping voices determine how transparent and open or tight and crunchy the distortion is. They will vary drastically depending on where the gain is set, what channel is active and how much bandwidth is being used. The bandwidth sets the frequency response of the distortion and goes from thin, light and clean through fat heavy and crunchy. It may very well be the single most important control the palisades has and what really sets it apart.\u003c\/p\u003e\n\u003cp\u003eGain A is a lower gain channel with a wider range of grit that is great for strumming open chords. Gain B is a higher gain channel with a tighter range that is great for palm muting and\/or shredding solos. The Palisades also has a foot switchable volume boost with adjustable level to take it over the top when you want to throw your foot up on the monitor and rip your sweet leads… or maybe just push the front end of your amp a little harder. Not enough? How about a normal\/bright switch to mix and match the overall tone to different amps and guitars. Still not enough? OK then, how about a buffer on\/off switch to tighten up the tone and make it sparkle when set to “ON” or warm it up and make it sag when set to “OFF”.\u003c\/p\u003e\n\u003cp\u003eThe Palisades is a versatile dude that will give you years of loving companionship. Each Palisades is hand made one at a time in the tiny tree house community of Akron, Ohio.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eControls:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBoost: Sets the level of the output boost.\u003c\/li\u003e\n\u003cli\u003eVolume: Sets the output level.\u003c\/li\u003e\n\u003cli\u003eTone: Brighter clockwise, warmer counter clockwise.\u003c\/li\u003e\n\u003cli\u003eGain A: Sets the gain for Channel A (lower gain)\u003c\/li\u003e\n\u003cli\u003eGain B: Sets the gain for Channel B (higher gain)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eToggle Switches:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNormal\/Bright: Normal is a warm full tone, Bright is livelier tone with more chime.\u003c\/li\u003e\n\u003cli\u003eBuffer: Turns the input buffer on or off. ON is a tighter and brighter tone while OFF is a warmer tone with more sag. The buffer is part of the drive circuit \u0026amp; is only available when the Palisades is activated.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eRotary Switches:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBandwidth: This sets the overall tone and gain structure of the Palisades. 1 is the thinnest setting with the least amount of gain and 5 is the fattest setting with the heaviest gain. Everything else is in between. This control has a major effect on all the settings of the Palisades, especially the gain and voice controls.\u003c\/li\u003e\n\u003cli\u003eVoice: This sets the nature of the Palisades distortion by changing the clipping diodes:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eNo diodes: The most open and least distorted.\u003c\/li\u003e\n\u003cli\u003eLED clipping: light clipping with a lot of volume.\u003c\/li\u003e\n\u003cli\u003eMosfet clipping: light gain OD with great harmonics.\u003c\/li\u003e\n\u003cli\u003eAsymmetrical Silicon clipping: Tighter light gain OD closest to stock 808.\u003c\/li\u003e\n\u003cli\u003eSymmetrical silicon clipping: tighter distorted tone.\u003c\/li\u003e\n\u003cli\u003eSchottky Diode clipping: Looser fuzzy tone.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eFoot Switches:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eActivate: True bypass switch\u003c\/li\u003e\n\u003cli\u003eGain B: Activates Gain Channel B\u003c\/li\u003e\n\u003cli\u003eBoost: Activates the output level boost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eFlexi-Switching:\u003c\/p\u003e\n\u003cp\u003eThis device features Flexi-Switch Technology on the Gain and Boost switches! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eFor standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eFor momentary operation, hold the footswitch down for as long as you’d like to use the effect. Once you release the switch the effect will be bypassed.\u003c\/p\u003e\n\u003cp\u003eSince the switching is relay based, it requires power to pass signal.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eMeasures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4.75″ x 5.65″ x 2.25″ with knobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003ePower:\u003c\/p\u003e\n\u003cp\u003eThe Palisades can be powered by a standard 9-volt DC power supply with a 2.1mm negative center barrel. Earthquaker Devices always recommends pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power.\u003c\/p\u003e\n\u003cp\u003eSwitching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. Do not run at higher voltages!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInput Impedance: 500K\u003c\/li\u003e\n\u003cli\u003eOutput Impedance: \u0026lt;10K\u003c\/li\u003e\n\u003cli\u003eCurrent Draw: 45mA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Earthquaker Devices","offers":[{"title":"Default Title","offer_id":41137833935026,"sku":"ACEARPALISADEV2","price":249.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/products\/57_ab8cdd14-21e6-4d48-89f9-88d6016e247a.jpg?v=1633957294"},{"product_id":"new-earthquaker-devices-palisades-v2-mega-ultimate-maximum-overdrive-pedal-1","title":"New Earthquaker Devices Palisades V2 Mega Ultimate Maximum Overdrive Pedal","description":"\u003cp\u003e\u003cstrong\u003eIncludes a Fender Custom Shop Tweed 10 ft instrument cable and two Fender Custom Shop Tweed 6 in patch cables\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMega Ultimate Overdrive:\u003c\/p\u003e\n\u003cp\u003eThe Palisades® is something Earthquaker Devices said they would never do… an overdrive based on the legendary TS808! Gasp! The horror! Another tubes creamer?? In 2014?? Really?? After loads of requests they finally buckled. They ran tests with every popular clone on the market as well as several vintage originals, compared, contrasted and took loads of notes. It was exhausting but informative. In the end, they threw it all away, used their ears and came up with what they feel is the most versatile relative of the 808 available today.\u003c\/p\u003e\n\u003cp\u003eWith 6 different clipping voices, 5 bandwidth settings and 2 gain channels you will be hard-pressed to not find a setting that will wipe every mid-boosting overdrive off your board. The clipping voices determine how transparent and open or tight and crunchy the distortion is. They will vary drastically depending on where the gain is set, what channel is active and how much bandwidth is being used. The bandwidth sets the frequency response of the distortion and goes from thin, light and clean through fat heavy and crunchy. It may very well be the single most important control the palisades has and what really sets it apart.\u003c\/p\u003e\n\u003cp\u003eGain A is a lower gain channel with a wider range of grit that is great for strumming open chords. Gain B is a higher gain channel with a tighter range that is great for palm muting and\/or shredding solos. The Palisades also has a foot switchable volume boost with adjustable level to take it over the top when you want to throw your foot up on the monitor and rip your sweet leads… or maybe just push the front end of your amp a little harder. Not enough? How about a normal\/bright switch to mix and match the overall tone to different amps and guitars. Still not enough? OK then, how about a buffer on\/off switch to tighten up the tone and make it sparkle when set to “ON” or warm it up and make it sag when set to “OFF”.\u003c\/p\u003e\n\u003cp\u003eThe Palisades is a versatile dude that will give you years of loving companionship. Each Palisades is hand made one at a time in the tiny tree house community of Akron, Ohio.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eControls:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBoost: Sets the level of the output boost.\u003c\/li\u003e\n\u003cli\u003eVolume: Sets the output level.\u003c\/li\u003e\n\u003cli\u003eTone: Brighter clockwise, warmer counter clockwise.\u003c\/li\u003e\n\u003cli\u003eGain A: Sets the gain for Channel A (lower gain)\u003c\/li\u003e\n\u003cli\u003eGain B: Sets the gain for Channel B (higher gain)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eToggle Switches:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNormal\/Bright: Normal is a warm full tone, Bright is livelier tone with more chime.\u003c\/li\u003e\n\u003cli\u003eBuffer: Turns the input buffer on or off. ON is a tighter and brighter tone while OFF is a warmer tone with more sag. The buffer is part of the drive circuit \u0026amp; is only available when the Palisades is activated.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eRotary Switches:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBandwidth: This sets the overall tone and gain structure of the Palisades. 1 is the thinnest setting with the least amount of gain and 5 is the fattest setting with the heaviest gain. Everything else is in between. This control has a major effect on all the settings of the Palisades, especially the gain and voice controls.\u003c\/li\u003e\n\u003cli\u003eVoice: This sets the nature of the Palisades distortion by changing the clipping diodes:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eNo diodes: The most open and least distorted.\u003c\/li\u003e\n\u003cli\u003eLED clipping: light clipping with a lot of volume.\u003c\/li\u003e\n\u003cli\u003eMosfet clipping: light gain OD with great harmonics.\u003c\/li\u003e\n\u003cli\u003eAsymmetrical Silicon clipping: Tighter light gain OD closest to stock 808.\u003c\/li\u003e\n\u003cli\u003eSymmetrical silicon clipping: tighter distorted tone.\u003c\/li\u003e\n\u003cli\u003eSchottky Diode clipping: Looser fuzzy tone.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eFoot Switches:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eActivate: True bypass switch\u003c\/li\u003e\n\u003cli\u003eGain B: Activates Gain Channel B\u003c\/li\u003e\n\u003cli\u003eBoost: Activates the output level boost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eFlexi-Switching:\u003c\/p\u003e\n\u003cp\u003eThis device features Flexi-Switch Technology on the Gain and Boost switches! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eFor standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eFor momentary operation, hold the footswitch down for as long as you’d like to use the effect. Once you release the switch the effect will be bypassed.\u003c\/p\u003e\n\u003cp\u003eSince the switching is relay based, it requires power to pass signal.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eMeasures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4.75″ x 5.65″ x 2.25″ with knobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003ePower:\u003c\/p\u003e\n\u003cp\u003eThe Palisades can be powered by a standard 9-volt DC power supply with a 2.1mm negative center barrel. Earthquaker Devices always recommends pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power.\u003c\/p\u003e\n\u003cp\u003eSwitching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. Do not run at higher voltages!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInput Impedance: 500K\u003c\/li\u003e\n\u003cli\u003eOutput Impedance: \u0026lt;10K\u003c\/li\u003e\n\u003cli\u003eCurrent Draw: 45mA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Earthquaker Devices","offers":[{"title":"Default Title","offer_id":41137834229938,"sku":"ACEARPALISADEV2F2","price":256.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/products\/1_129bf321-1c8e-4e3a-84ce-8d0c658ad0b0.png?v=1633957307"},{"product_id":"new-earthquaker-devices-rainbow-machine-v2-polyphonic-pitch-shifter-pedal-1","title":"New Earthquaker Devices Rainbow Machine V2 Polyphonic Pitch Shifter Pedal","description":"\u003cp\u003e\u003cstrong\u003eIncludes a Fender Custom Shop Tweed 10 ft instrument cable and two Fender Custom Shop Tweed 6 in patch cables\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePolyphonic Pitch Mesmerizer\u003c\/p\u003e\n\u003cp\u003eWelcome to the Rainbow Machine™, in all its synthetic glory!\u003c\/p\u003e\n\u003cp\u003eThis one is for experimenters, adventurists, and noisemakers. Totally not for purists and\/or tone hounds. There are no “natural sounds” that come from this box. It takes modern DSP and uses it as a tool of future past to create real-time pitch shifting using digital oscillators.\u003c\/p\u003e\n\u003cp\u003eThe Rainbow Machine has been completely re-imagineered from the pixie dust-covered ground up to be more versatile, twice as loud as the original, with an extended delay time, deeper chorus tones, silent Flexi-Switch™ foot switches on both the Activate and Magic functions, and most of all, has more Magic.\u003c\/p\u003e\n\u003cp\u003eThe Rainbow Machine is built around a DSP pitch warping engine that’s designed to be slightly imperfect; colored with digital remnants of the cosmic dust Earthquaker picked up across the multiverse. That is to say it’s a cold digital beast made to pretend it has feelings.\u003c\/p\u003e\n\u003cp\u003eThe Pitch control adjusts the frequency of the polyphonic pitch-warped harmony from a fourth below your input, to a third above, and every atonal pitch in-between. Noon is the unison position. Use the Primary function control to adjust the volume of the polyphonic harmony.\u003c\/p\u003e\n\u003cp\u003eYou may add in an accompanying octave or thicken the modulation by bringing up the Secondary function control. The Tracking control adjusts the lag time between the wet and dry signals, and the Tone control rolls off some treble for a darker, “vintage” sound. Clockwise is bright, counterclockwise is dark.\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003e\u003cem\u003ePro Tip:\u003c\/em\u003e The Rainbow Machine’s pitch warping behavior is entirely dependent upon the Pitch knob’s position relative to noon. Set above noon, echoes, pixie trails, and other effects will ascend in pitch as they sustain. With the Pitch control below noon, any lingering effects will descend in pitch. This becomes extremely important when using the Magic function.\u003c\/p\u003e\n\u003cp\u003eThe Secondary control adds an octave of the Primary harmony. When the Pitch control is above noon, Secondary adds an octave above the harmony. When the Pitch control is below noon, the Secondary control will add one octave below the harmony. With the Pitch set to noon, the Secondary control adds an additional chorus voice for modulated, triple-tracked tones. Use this control to blend in faux-shimmer sounds or a low-frequency rumble.\u003c\/p\u003e\n\u003cp\u003eAnd you can choose how weird you wanna get with the Magic control. This is a regeneration control that creates aliasing (among other things) by feeding the Primary and Secondary signals back on themselves and each other.\u003c\/p\u003e\n\u003cp\u003eWith the Magic engaged and the control set low, you can squeeze a few extra repeats out of whatever setting you happen to be using. As you increase the Magic control, you’ll start noticing increased ambiance, resonant, edge-of-oscillation pitch-shifting delays, chorus, metallic digi-flanging, ascending (or descending) pixie trails, controllable self-oscillation, squalls of synthetic noise, and finally, distortion. In conjunction with the Tracking control, the Magic creates wild pitch take offs and descends, chaos chorusing, signal transformation, and other general mayhem.\u003c\/p\u003e\n\u003cp\u003eEach and every Rainbow Machine is harvested by hand in the (pixie) dusty Rainbonium mines of sunshiny Akron, Ohio, USA.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eControls:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePitch: This controls the pitch of the harmony. All the way counterclockwise is a 4th down, all the way clockwise is a 3rd up. The middle position is unison. The pitch can be controlled by an expression pedal as well.\u003c\/li\u003e\n\u003cli\u003ePrimary: This controls the volume of the Primary pitch-shifted signal. Unity gain is at about 2 o’clock, anything above will boost the signal.\u003c\/li\u003e\n\u003cli\u003eSecondary: This controls the volume of the secondary pitch-shifted signal. The Secondary controls the octave up\/down from the primary pitch. At the noon position the Secondary is not present at all. Turning the knob counterclockwise from noon yields an octave below, whereas turning clockwise yields an octave above and everything in between.\u003c\/li\u003e\n\u003cli\u003eTracking: This controls the amount of lag time between the direct dry signal and the shifted wet signal. The pitch-shifted signal will track right on the dry signal when this control is all the way clockwise. It will start to lag behind the more it is reduced.\u003c\/li\u003e\n\u003cli\u003eMagic: This adjusts the “weirdness” of the effect. The end result is a wide variety of wild effects depending on where the other controls are set. The magic control will only work if the magic switch is engaged and the primary and\/or secondary are in use.\u003c\/li\u003e\n\u003cli\u003eTone: All the way clockwise is full signal, turn counterclockwise to soften the highs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eExp Jack:\u003c\/p\u003e\n\u003cp\u003eThis is an expression pedal control jack for the pitch. The Pitch control is defeated when an expression pedal is inserted.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eFlexi-Switching:\u003c\/p\u003e\n\u003cp\u003eThis device features Flexi-Switch™ Technology on the Activate and Magic switches! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eFor standard latching operation, tap the foot switch once to activate the effect and then tap again to bypass.\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eFor momentary operation, hold the foot switch down for as long as you’d like to use the effect. Once you release the switch the effect will be bypassed.\u003c\/p\u003e\n\u003cp\u003eSince the switching is relay based, it requires power to pass signal.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eMeasures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4.65″ x 3.65″ x 2.25″ with knobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003ePower:\u003c\/p\u003e\n\u003cp\u003eThe Rainbow Machine should be powered by a standard 9-volt DC power supply with a 2.1mm negative center barrel. Earthquaker Devices always recommends pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power.\u003c\/p\u003e\n\u003cp\u003eSwitching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. Do not run at higher voltages!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInput impedance: 1M\u003c\/li\u003e\n\u003cli\u003eOutput impedance: \u0026lt;1K\u003c\/li\u003e\n\u003cli\u003eCurrent Draw: 60mA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Earthquaker Devices","offers":[{"title":"Default Title","offer_id":41137835016370,"sku":"ACEARRAINBOWV2F2","price":237.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/products\/57_d6fa4d5d-bce6-433c-ac0c-1745365efcd0.jpg?v=1633957335"},{"product_id":"new-earthquaker-devices-sea-machine-v3-mega-chorus-guitar-effects-pedal","title":"New Earthquaker Devices Sea Machine V3 Mega Chorus Guitar Effects Pedal","description":"\u003cp\u003eSuper Chorus:\u003c\/p\u003e\n\u003cp\u003eThe Sea Machine™ is a chorus pedal with as many modulation possibilities as there are fish in the ocean. That’s a lot of fish. And a lot of modulation. From subtle, shimmery chorus sounds, to wobbly, seasick, warbly pitch-bent detuning that rocks the boat, the Sea Machine is the audio bait that’ll help you reel in the big one.\u003c\/p\u003e\n\u003cp\u003eThe Sea Machine ain’t no one-trick seahorse. A variable waveshape LFO (adjustable via the Shape control) modulates your chorus tone from a smooth triangle shape, to a rough and choppy square wave, and an extended delay line allows you to dive deeper into uncharted modulated waters than ever before. Other LFO controls include Rate, which sets the speed of the LFO, and Depth, which sets how strongly the LFO modulates the delay time.\u003c\/p\u003e\n\u003cp\u003eThe delay line has controls for Dimension, Animate, and Depth. The Dimension control adds a slightly detuned slapback at low levels, reverb-like ambience at mid-levels, and a trippy echo-resonance that leads to self-oscillation when cranked. The Animate control is the real pearl in the Sea Machine’s oyster. This controls how far the pitch swings. At lower settings, you’ll hear slight detuning for a subtle double-tracked thickening effect, like traditional chorus pedals. As you increase the Animate control, the pitch swings further and further away from the root note for an effect that lies somewhere between chorus and vibrato, before landing at full tilt on sonar-like oscillations. Finally, the Intensity control rounds out the delay line, adjusting the blend between the modulated and dry signals.\u003c\/p\u003e\n\u003cp\u003eWith this mix of standard and unique controls, everything from subtle warble, classic Leslie, seasick pitch bends, strangled alien sounds, stunted arpeggiations and many more far out sounds are available. Or you could just use it as a chorus. That works, too. And if you’re a bass player who fancies the classic 80s post-punk bass sound, the Sea Machine is pretty much just like (tone) heaven.\u003c\/p\u003e\n\u003cp\u003eThey’ve designed the Sea Machine to work well following fuzz \/ overdrive \/ distortion pedals without getting muddy, lowering in output, or breaking up. Also, when engaged, the Sea Machine’s transparent buffer leaves the all-analog dry signal unaltered and crystal clear.\u003c\/p\u003e\n\u003cp\u003eThe Sea Machine is true-bypass, uses silent relay-based switching, and is built one at a time in the belly of the great white whale along the shores of the Ohio \u0026amp; Erie Canal in Akron, Ohio, USA.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eV3 UPDATES - JUNE 2017:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eImproved circuitry for better performance, cleaner sound, and lower noise\u003c\/li\u003e\n\u003cli\u003eMore range added to almost every control from subtle modulation to extreme oscillation\u003c\/li\u003e\n\u003cli\u003eSilent relay-based switching\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eControls:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRate: Sets the speed of the LFO. The miniature LED will show the tempo even in bypass mode.\u003c\/li\u003e\n\u003cli\u003eShape: From soft triangle through hard square wave.\u003c\/li\u003e\n\u003cli\u003eDimension: Adds a slight slap-back at low levels, reverb-like ambiance at mid levels and an echo-resonance at max.\u003c\/li\u003e\n\u003cli\u003eDepth: How much the LFO modulates the delay time.\u003c\/li\u003e\n\u003cli\u003eAnimate: How far the pitch shifted signal swings, lower levels equals a tighter and more focused shift like traditional chorus. As you increase the control a more wild and animated pitch shift begins to emerge.\u003c\/li\u003e\n\u003cli\u003eIntensity: How much modulated signal is blended in with the dry signal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eMeasures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4.75″ x 2.50″ x 2.25″ with knobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003ePower:\u003c\/p\u003e\n\u003cp\u003eEarthquaker pedals take a standard 9 volt DC power supply with a 2.1mm negative center barrel. Earthquaker Devices always recommends pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power.\u003c\/p\u003e\n\u003cp\u003eSwitching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. Do not run at higher voltages!\u003c\/p\u003e\n\u003cp\u003eCurrent draw is 50 mA.\u003c\/p\u003e","brand":"Earthquaker Devices","offers":[{"title":"Default Title","offer_id":41137835540658,"sku":"ACEARSEAV3","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/products\/57_73c2dd30-43a1-4ccc-9a92-100fc104f545.jpg?v=1633957347"},{"product_id":"new-earthquaker-devices-sea-machine-v3-mega-chorus-guitar-effects-pedal-1","title":"New Earthquaker Devices Sea Machine V3 Mega Chorus Guitar Effects Pedal","description":"\u003cp\u003e\u003cstrong\u003eIncludes a Fender Custom Shop Tweed 10-foot instrument cable and a 6-inch patch cable\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Sea Machine is a chorus pedal with as many modulation possibilities as there are fish in the ocean. That's a lot of fish. And a lot of modulation. From subtle, shimmery chorus sounds, to wobbly, seasick, warbly pitch-bent detuning that rocks the boat, the Sea Machine is the audio bait that'll help you reel in the big one.\u003c\/p\u003e\n\u003cp\u003eThe Sea Machine ain't no one-trick seahorse. A variable waveshape LFO (adjustable via the Shape control) modulates your chorus tone from a smooth triangle shape, to a rough and choppy square wave, and an extended delay line allows you to dive deeper into uncharted modulated waters than ever before. Other LFO controls include Rate, which sets the speed of the LFO, and Depth, which sets how strongly the LFO modulates the delay time.\u003c\/p\u003e\n\u003cp\u003eThe delay line has controls for Dimension, Animate, and Depth. The Dimension control adds a slightly detuned slapback at low levels, reverb-like ambience at mid-levels, and a trippy echo-resonance that leads to self-oscillation when cranked. The Animate control is the real pearl in the Sea Machine's oyster, if you will. This controls how far the pitch swings. At lower settings, you'll hear slight detuning for a subtle double-tracked thickening effect, a la traditional chorus pedals. As you increase the Animate control, the pitch swings further and further away from the root note for an effect that lies somewhere between chorus and vibrato, before landing at full tilt on sonar-like oscillations. Finally, the Intensity control rounds out the delay line, adjusting the blend between the modulated and dry signals.\u003c\/p\u003e\n\u003cp\u003eWith this mix of standard and unique controls, everything from subtle warble, classic Leslie, seasick pitch bends, strangled alien sounds, stunted arpeggiations and many more far out sounds are available. Or you could just use it as a chorus. The Sea Machine works well following fuzz \/ overdrive \/ distortion pedals without getting muddy, lowering in output, or breaking up. When engaged, the Sea Machine's transparent buffer leaves the all-analog dry signal unaltered and crystal clear.\u003c\/p\u003e\n\u003cp\u003eThe Sea Machine is true-bypass, uses silent relay-based switching, and is built one at a time in Akron, Ohio, USA.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eV3 UPDATES - JUNE 2017:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eImproved circuitry for better performance, cleaner sound, and lower noise\u003c\/li\u003e\n\u003cli\u003eMore range added to almost every control from subtle modulation to extreme oscillation\u003c\/li\u003e\n\u003cli\u003eSilent relay-based switching\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eControls:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRate: Sets the speed of the LFO. The miniature LED will show the tempo even in bypass mode.\u003c\/li\u003e\n\u003cli\u003eShape: From soft triangle through hard square wave.\u003c\/li\u003e\n\u003cli\u003eDimension: Adds a slight slap-back at low levels, reverb-like ambiance at mid levels and an echo-resonance at max.\u003c\/li\u003e\n\u003cli\u003eDepth: How much the LFO modulates the delay time.\u003c\/li\u003e\n\u003cli\u003eAnimate: How far the pitch shifted signal swings.\u003c\/li\u003e\n\u003cli\u003eIntensity: How much modulated signal is blended in with the dry signal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eMeasures: 4.75 x 2.50 x 2.25 with knobs\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePower: Earthquaker pedals take a standard 9 volt DC power supply with a 2.1mm negative center barrel. Current draw is 50 mA.\u003c\/p\u003e","brand":"Earthquaker Devices","offers":[{"title":"Default Title","offer_id":41137836228786,"sku":"ACEARSEAV3F0","price":207.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/products\/57_c0386f26-6f14-41ac-a6c0-7a09e65a3772.jpg?v=1633957371"},{"product_id":"new-earthquaker-devices-tone-job-v2-eq-and-boost-pre-amp-guitar-effects-pedal-1","title":"New Earthquaker Devices Tone Job V2 EQ and Boost Pre-Amp Guitar Effects Pedal","description":"\u003cp\u003e\u003cstrong\u003eIncludes a Fender Custom Shop Tweed 10-foot instrument cable and a 6-inch patch cable\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIs your tone pulling its weight? Put it to work with a Tone Job! This compact Boost \u0026amp; EQ device is based around the tone-shaping options available in old audiophile-grade stereo preamps, making it a great addition to your pedalboard no matter what instrument you play.\u003c\/p\u003e\n\u003cp\u003eYou'll hear full frequency response from your Tone Job everywhere you plug it in - guitar, bass, drum machine, synthesizers, and more. The Tone Job has active EQ controls for Bass, Mid, and Treble, with up to 20 dB of cut or boost, which is handy for pairing up with other pedals in your chain to breathe new life into old dirt. Unlike boring old graphic EQs, the Tone Job's EQ controls are interactive, so you can experiment with different settings to alter the response and overall feel of the device.\u003c\/p\u003e\n\u003cp\u003ePlace the Tone Job at the beginning of your chain to alter the overall character of your guitar, or use it at the end to boost output at the end of a long cable run and fine-tune your tone. The Level control on the Tone Job can boost your signal up to 5x the original input level, so you'll always be heard, and makes for a fantastic solo and\/or clean boost!\u003c\/p\u003e\n\u003cp\u003eThe Tone Job is all analog, true-bypass, and built one-at-a-time in Akron, Ohio, USA.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eControls:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLevel: Post EQ volume control. Can boost the signal up to 5x the input. Unity is around 10 o'clock.\u003c\/li\u003e\n\u003cli\u003eTreble: Noon is flat, boost is clockwise from noon, cut is counter clockwise from noon.\u003c\/li\u003e\n\u003cli\u003eBass: Noon is flat, boost is clockwise from noon, cut is counter clockwise from noon.\u003c\/li\u003e\n\u003cli\u003eMiddle: Noon is flat, boost is clockwise from noon, cut is counter clockwise from noon.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eMeasures: 4.625 x 2.5 x 2.25 with knobs\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePower: The Tone Job should be powered by a standard 9-18 volt DC power supply intended for musical instruments with a negative center 2.1mm barrel. Current draw is 10 mA.\u003c\/p\u003e","brand":"Earthquaker Devices","offers":[{"title":"Default Title","offer_id":41137836949682,"sku":"ACEARTONEJOBV2F0","price":169.09,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/products\/1_c13575cf-3ea5-4a44-9a94-0806382d6f25.png?v=1633957390"},{"product_id":"new-earthquaker-devices-pyramids-stereo-flanging-device-guitar-pedal","title":"New Earthquaker Devices Pyramids Stereo Flanging Device Guitar Pedal","description":"\u003cp\u003eBuilt upon the same proprietary DSP architecture as the smash-hit Avalanche Run™, Pyramids™ is a Stereo Flanging Device with five user-definable presets (a first for any EarthQuaker Devices pedal!), eight flanger modes, tap tempo, tap subdivision via the Rate \u0026amp; Tap mini-toggle, a multifunction Modify control, positive and negative feedback, and a variable Mix control, which is something you don't see on a flanger every day.\u003c\/p\u003e\n\u003cp\u003ePyramids' \"Activate\" footswitch features EarthQuaker Devices' exclusive Flexi-Switch™ technology. This relay-based true-bypass switching platform allows for momentary or latching operation, making it easier than ever to engage the effect to bedazzle individual notes or phrases!\u003c\/p\u003e\n\u003cp\u003ePyramids' eight flanger modes are:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClassic:\u003c\/strong\u003e delivers the classic jet-plane liquid-silk flanging sound we all know and love, recreating studio-quality ADT sounds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThrough-Zero:\u003c\/strong\u003e authentic tape-style flanging with swirling, dramatic phase cancellation and comb-filtering effects in stereo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBarber Pole Up:\u003c\/strong\u003e infinitely sweeping upward flanging effect derived from the Shephard Tone auditory illusion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBarber Pole Down:\u003c\/strong\u003e infinitely sweeping downward flanging effect derived from the Shephard Tone auditory illusion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrigger Up:\u003c\/strong\u003e infinitely upward sweeping flanger that restarts with each new pick attack or by pressing the Tap\/Trigger footswitch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrigger Down:\u003c\/strong\u003e infinitely downward sweeping flanger that restarts with each new pick attack or Tap\/Trigger press.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStep:\u003c\/strong\u003e sweeps in stepped increments, producing a rhythmic flange effect similar to a synth arpeggiator.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRandom:\u003c\/strong\u003e sweeps in random intervals, creating a chaotic flange effect similar to a synth sample \u0026amp; hold.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRouting possibilities include Mono in\/Mono out, Mono in\/Stereo out, and Stereo in\/Stereo out.\u003c\/p\u003e\n\u003cp\u003eComplete Features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFive user-definable presets\u003c\/li\u003e\n\u003cli\u003eTap tempo with subdivision via Rate \u0026amp; Tap mini-toggle\u003c\/li\u003e\n\u003cli\u003eMultifunction Modify control\u003c\/li\u003e\n\u003cli\u003eVariable Mix control\u003c\/li\u003e\n\u003cli\u003ePositive and Negative feedback\u003c\/li\u003e\n\u003cli\u003eEight flanger modes (Classic, Through-Zero, Barber Pole Up\/Down, Trigger Up\/Down, Step, Random)\u003c\/li\u003e\n\u003cli\u003eExpression control over Manual in all modes\u003c\/li\u003e\n\u003cli\u003eSide Chain Flanging in Trigger modes\u003c\/li\u003e\n\u003cli\u003eStereo inputs and outputs\u003c\/li\u003e\n\u003cli\u003eFlexi-Switch™ true bypass with momentary\/latching operation\u003c\/li\u003e\n\u003cli\u003eAll-analog dry signal path\u003c\/li\u003e\n\u003cli\u003e24-bit 96kHz A\/D \u0026amp; D\/A converters\u003c\/li\u003e\n\u003cli\u003eS\/N Ratio: 115dB typical\u003c\/li\u003e\n\u003cli\u003eCurrent Draw: 425mA\u003c\/li\u003e\n\u003cli\u003eIncludes 9V DC power supply\u003c\/li\u003e\n\u003cli\u003eDimensions: 4.65\" x 4.15\" x 2.25\"\u003c\/li\u003e\n\u003cli\u003eLifetime guarantee\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Earthquaker Devices","offers":[{"title":"Default Title","offer_id":41137859657906,"sku":"ACEARPYRAMIDS","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/products\/57_91450ad4-f2aa-4408-98e5-f2349ccc0b9f.jpg?v=1633957870"},{"product_id":"new-earthquaker-devices-tentacle-v2-analog-octave-up-guitar-effects-pedal-1","title":"New Earthquaker Devices Tentacle V2 Analog Octave Up Guitar Effects Pedal","description":"\u003cp\u003eIncludes two new Fender Custom Shop Tweed 6-inch patch cables and a new Fender Custom Shop Tweed 10-foot instrument cable.\u003c\/p\u003e\n\u003cp\u003eThe Tentacle is a classic analog octave up effect. It is the very same octave from EarthQuaker Devices' beloved Hoof Reaper pedal. EarthQuaker got so many requests to make this a stand-alone unit that they just had to make it a reality. You can now add an excellent, swelling octave-up to anything your heart desires! Pair it with your favorite fuzz and unleash your inner shredder. Put it in front of another octave-up and blow your amp's mind. Throw it in the effects loop of a delay and marvel at what happens. What's better? It has no controls! Just hit the switch and go for it. The Tentacle is an analog octave-up; the effect will become much more pronounced when using your neck pickup and playing above the 12th fret.\u003c\/p\u003e\n\u003cp\u003eFlexi-Switch:\u003c\/p\u003e\n\u003cp\u003eThis device features Flexi-Switch Technology. This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching. For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass. For momentary operation, hold the footswitch down for as long as you'd like to use the effect; once you release the switch the effect will be bypassed. Since the switching is relay based, it requires power to pass signal.\u003c\/p\u003e\n\u003cp\u003eMeasures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4.55″ x 2.40″ x 1.95″\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePower:\u003c\/p\u003e\n\u003cp\u003eTentacle should be powered by a standard 9-volt DC power supply with a 2.1mm negative center barrel. EarthQuaker Devices always recommends pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Do not run at higher voltages.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInput Impedance: 100K\u003c\/li\u003e\n\u003cli\u003eOutput Impedance: \u0026lt;1K\u003c\/li\u003e\n\u003cli\u003eCurrent Draw: 2mA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Earthquaker Devices","offers":[{"title":"Default Title","offer_id":41138064556210,"sku":"ACEARTENTACLEV2F2","price":140.59,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/products\/57_1580746b-e52f-47d1-a1eb-335cd8404ecc.jpg?v=1633961202"},{"product_id":"new-earthquaker-devices-levitation-v2-reverb-guitar-effects-pedal","title":"New Earthquaker Devices Levitation V2 Reverb Guitar Effects Pedal","description":"\u003cp\u003eIntroducing the Levitation reverb, a pedal designed by EarthQuaker Devices in conjunction with the LEVITATION music festival! LEVITATION, founded as Austin Psych Fest in 2008, has become a way to honor and preserve Austin’s psychedelic rock heritage, and carry it into the future. They wanted to remain true to the theme of LEVITATION and decided to do a variation on their popular Ghost \u003cspan\u003eEcho™\u003c\/span\u003e pedal to honor the reverb-drenched tones synonymous with classic psych rock. The Levitation Reverb builds on the base sound found in the Ghost \u003cspan\u003eEcho™\u003c\/span\u003e but does away with the attack and dwell and adds control over tone, decay, atmosphere and length in their place. It is a vintage voiced reverb that aims to fit somewhere between dirty sixties chambers, classic spring, and the big, ringing plate reverbs of days gone by.\u003c\/p\u003e\n\u003cp\u003eFour knobs and one switch control quite a bit more than you’d expect. Want a slap back small room sound? Set all of your controls to the minimum and use the mix to dial in the sound of room devoid of anything but a guitar and amp. Want to revel in infinite spatial oscillations? Flip the toggle to long, turn up the atmosphere and decay then tune out. Dial in a bright chiming slap back by turning the tone all the way counter clockwise and reducing the decay. For a rattling, full-bandwidth assault, dime everything and let ‘er rip.\u003c\/p\u003e\n\u003cp\u003eEach Levitation Reverb is built entirely by hand in Akron, Ohio by EarthQuaker Devices. \u003c\/p\u003e\n\u003cp\u003eThe Levitation Reverb is True Bypass.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eControls:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLength (Toggle): Broad stroke control for decay time. Shorter to left, longer to the right.\u003c\/li\u003e\n\u003cli\u003eDecay: Controls the length of the reverb decay. Longer clockwise, shorter counter clockwise.\u003c\/li\u003e\n\u003cli\u003eAtmosphere: This is a harmonic regeneration control, it feeds the upper frequencies of the reverb trails back through to create a more harmonic (ringing) reverb. More atmosphere clockwise, less counter clockwise.\u003c\/li\u003e\n\u003cli\u003eMix: This controls how much wet signal is blended in with the dry. More reverb clockwise, less counter clockwise.\u003c\/li\u003e\n\u003cli\u003eTone: This is an input bandwidth control for the reverberated signal. All the way counter clockwise reduces all low end content to make a brighter reverb, turning clockwise allows more low end to pass through resulting in a fuller reverberated tone.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eMeasures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 5\/8″ x 2 1\/2″ x 2.25″ with knobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003ePower (Not Included):\u003c\/p\u003e\n\u003cp\u003eEarthquaker pedals take a standard 9 volt DC power supply with a 2.1mm negative center barrel. Earthquaker Devices always recommends pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power.\u003c\/p\u003e\n\u003cp\u003eSwitching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. Do not run at higher voltages!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInput impedance: 1M\u003c\/li\u003e\n\u003cli\u003eOutput impedance: \u0026gt;1K\u003c\/li\u003e\n\u003cli\u003eCurrent draw is 50 mA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Earthquaker Devices","offers":[{"title":"Default Title","offer_id":41138073534642,"sku":"ACEARLEVITATNV2","price":189.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/products\/Levitation.jpg?v=1648071149"},{"product_id":"new-earthquaker-afterneath-v3-limited-edition-magenta-blue-reverb-effects-pedal","title":"New Earthquaker Afterneath V3 Limited Edition Magenta Blue Reverb Effects Pedal","description":"\u003cp\u003e\u003cstrong\u003eLimited Edition Color: Illusion Lite Blue and Magenta\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis item is new, in box! Store receipt included.\u003c\/p\u003e\u003cp\u003eFrom EarthQuaker:\u003c\/p\u003e\u003cp\u003eThe Afterneath sounds a lot like it looks – a wizard bursting forth from ethereal cave and ready for the ambient battle. You are the wizard – or sorceress, if you prefer – and the cave is your instrument's signal, vast, expansive, and magical. Do you go inside? Roll a D20 to proceed!\u003c\/p\u003e\u003cp\u003eOnce inside, a reflection of light from an unknown source catches your eye, and you notice a bizarre sheen on the walls of the cave. You timidly inch closer to the walls of the cave. Placing your hand gently on the cavern wall, you feel the rock move. The cave is alive! Alarmed, you emit a loud gasp, which reverberates throughout the subterranean landscape. Upon further listening, it appears as though the reverberations of your voice are in fact a swarm of short digital delays which may be used to create wild and cavernous reverbs, or scattered, short, rhythmic delays with bizarre characteristics.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eControls\u003c\/strong\u003e:\u003c\/p\u003e\u003cp\u003eTake a moment to consider your Intelligence and Wisdom scores, as well as your spell inventory before proceeding further. You have seven spells at your disposal…\u003c\/p\u003e\u003cp\u003eWill you cast \"Length,\" which controls the decay length of the reverb?\u003c\/p\u003e\u003cp\u003eWhat about \"Diffuse,\" which adjusts the spread of the reverb? With your wand (or just the knob) turned counterclockwise, the reverb is sharper with more attack, resulting in a stuttering sputter of individual early reflections. Clockwise casts a washy, more ambient-sounding hex.\u003c\/p\u003e\u003cp\u003eOverwhelmed by fear, you hastily cast \"Dampen!\" As you shout the incantation, you notice that a counterclockwise variation of this spell results in brighter tones, while as you rotate your wand clockwise; you hear darker tones with a mellower top-end. It's almost as if your magic changes the hardness of the cavern walls, and thus the tonal characteristics of the reverb!\u003c\/p\u003e\u003cp\u003eElsewhere in your book of magic is \"Drag,\" which separates the individual digital delay lines, literally dragging them through the very fabric of time and space towards an unknown event horizon from which they may never return. Clockwise \"Drag\" positions will gather the delay lines close together for a more reverb-like effect. Turn the \"Drag\" counterclockwise, and the delay lines will begin to pull apart for a scattered ping-pong delay effect.\u003c\/p\u003e\u003cp\u003eThe Drag can be put under voltage or expression control using the \"EXP\" jack located on the side and operates in 9 different modes which are selected by the small \"Mode\" control. These modes are: Unquantized, Unquantized with slew, Unquantized volt\/octave, Chromatic scale, Major scale, Minor scale, Pentatonic scale, Octaves \u0026amp; fifths and Octaves. These modes drastically change the way the Drag control functions, especially while using an expression control or CV.\u003c\/p\u003e\u003cp\u003eThe \"Reflect\" alters the depth of the cave, and with it the regeneration of the reverb. This acts as a feedback control and will self-oscillate if cast by a high-level user. Turn clockwise for more wash and echoes, counterclockwise for less.\u003c\/p\u003e\u003cp\u003eFinally, the \"Mix\" alters the alchemical balance between the input signal and the effect. The Afterneath does not go fully wet but does lower the level of the input signal as you raise this control to create the appearance of a fully wet reverb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eModes\u003c\/strong\u003e:\u003c\/p\u003e\u003cp\u003eThe Modes control changes the way the Drag control functions. The LED will change colors indicating which mode you are in.\u003cbr\u003e1. Unquantized: Smooth, unquantized response over the operating range\u003cbr\u003e2. Unquantized with Slew: Smooth, unquantized response over the entire operating range, but with a musical slew that is reminiscent of turning the varispeed knob on a vintage British tape delay. The \"Drag\" will lag behind the knob or CV changes, but then quickly catch up.\u003cbr\u003e3. Unquantized Volt\/Octave: Smooth and unquantized, yet scaled to align with the 1v\/octave curve to allow melodic modulation of audio in the buffer, or control the frequency of self-oscillation like a voltage controlled oscillator.\u003cbr\u003e4. Chromatic Scale: Quantized 1v\/octave to the chromatic scale\u003cbr\u003e5. Minor Scale: Quantized 1v\/octave to the minor scale\u003cbr\u003e6. Major Scale (Lydian): Quantized 1v\/octave to the major scale (Lydian)\u003cbr\u003e7. Pentatonic Scale: Quantized 1v\/octave to the pentatonic scale\u003cbr\u003e8. Octaves \u0026amp; Fifths: Quantized 1v\/octave to omit all but octaves and fifths\u003cbr\u003e9. Octaves: Quantized 1v\/octave to omit all but octaves\u003c\/p\u003e\u003cp\u003eDimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs\u003cbr\u003eCurrent Draw: 100 mA\u003cbr\u003eInput Impedance: 1 MΩ\u003cbr\u003eOutput Impedance: 500 Ω\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpression Jack\u003c\/strong\u003e\u003cbr\u003eThis is an expression pedal control jack for the Drag. The Afterneath requires an expression pedal with a value of 50k, we recommend the Moog EP-3 or similar. While it will work with a standard 10k expression pedal, a 50k expression pedal will allow you to access the full range of each mode. Tip is the wiper, Ring is 5v and Sleeve is ground. You can also use CV with this jack. CV operates 0-5v.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFlexi-Switch Technology\u003c\/strong\u003e\u003cbr\u003eThis device features Flexi-Switch Technology! This electronic switching style allows you to simultaneously use momentary and latching style switching. For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass. For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch, the effect will be bypassed. The Afterneath uses electronic buffered bypass, it requires power to pass signal and the buffer is always active. You may experience a pop the first time the Afterneath is switched on after power up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTails \/ No Tails Switching\u003c\/strong\u003e\u003cbr\u003eThe Afterneath is factory set in \"tails mode.\" This means that the wet signal will naturally decay and slowly fade to silence after the effect is switched off. To deactivate this feature: Unplug the power cable from the power jack. Hold down the footswitch and insert the power cable. The LED will flash 3 times. You can now release the footswitch. Follow the same steps to reactivate tails mode.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003cbr\u003eThis device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel (not included). We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":47531433459890,"sku":"ACEARAFTERV3LTD","price":199.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/u1ze1wjj5m3qbvbtyfsu.jpg?v=1779959476"},{"product_id":"new-earthquaker-astral-destiny-limited-edition-black-gold-octave-reverb-pedal","title":"New EarthQuaker Astral Destiny Limited Edition Black \u0026 Gold Octave Reverb Pedal","description":"\u003cp\u003e\u003cstrong\u003eEarthQuaker Devices Astral Destiny Octave Reverb Guitar Effects Pedal\u003c\/strong\u003e\u003cbr\u003eColor: Limited Edition March Radness Black \u0026amp; Gold\u003c\/p\u003e\u003cp\u003eFrom EarthQuaker:\u003cbr\u003e\u003cbr\u003eAn Octal Octave Reverberation Odyssey\u003cbr\u003e\u003cbr\u003eThe Astral Destiny is a compact and powerful modulated octave reverb pedal that features 8 reverb modes with 8 editable presets, assignable expression control, tails for natural reverb decay when the effect is bypassed and a super cool stretch feature that doubles the length of the reverb while adding an adjustable pitch bending effect.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eReverb Modes:\u003c\/strong\u003e\u003cbr\u003e1. Abyss: Huge reverb with no octave effect\u003cbr\u003e2. Shimmer: Adds an upper octave to the reverb tail\u003cbr\u003e3. Sub: Adds a lower octave to the reverb tail\u003cbr\u003e4. Sub Shimmer: Adds an upper and lower octave to the reverb tail\u003cbr\u003e5. Astral: Adds an upper and lower octave combined with a regenerating tail\u003cbr\u003e6. Ascend: Upward pitch bending\u003cbr\u003e7. Descend: Downward pitch bending\u003cbr\u003e8. Cosmos: Adds a regenerating fifth to the reverb tail\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eControls\u003c\/strong\u003e:\u003cbr\u003e1. Preset: 8 position rotary switch to recall presets. Astral Destiny ships with 8 presets which can be edited or overwritten.\u003cbr\u003e2. Length: Controls the length of the reverb decay.\u003cbr\u003e3. Mode: 8 position rotary switch to select the reverb mode.\u003cbr\u003e4. Depth: Adjusts the intensity of the chorus effect.\u003cbr\u003e5. Rate: Adjusts the rate of the chorus effect.\u003cbr\u003e6. Tone: Boosts treble clockwise, cuts treble counterclockwise. Center is a flat frequency response.\u003cbr\u003e7. Mix: Level control for the reverb effect.\u003cbr\u003e8. Activate Footswitch: You are probably gonna need this to activate and deactivate the reverb effect.\u003cbr\u003e9. Stretch Footswitch: Doubles the length of the reverb effect while adding a temporary change in pitch.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePresets\u003c\/strong\u003e:\u003cbr\u003eThe Astral Destiny operates between two different modes: Live or Preset. It comes with 8 factory presets, 1 for each reverb mode, that can be edited or completely overwritten for your enjoyment. The settings for Length, Depth, Rate, Tone, Mix as well as EXP assignment and Stretch length can all be stored and recalled. Any of the Astral Destiny's 8 reverb modes can be used as the basis for each of the 8 presets.\u003cbr\u003e\u003cbr\u003eLive Mode\u003cbr\u003eThis is the standard mode of operation that the Astral Destiny ships in and is indicated by a Green or Red Activate LED depending on the bypass state. Astral Destiny will operate manually in this mode and all controls will visually indicate the current settings.\u003cbr\u003e\u003cbr\u003ePreset Mode\u003cbr\u003eThis puts the Astral Destiny into one of the 8 presets selected by the Preset rotary switch. This mode is indicated by a Yellow Activate LED. The panel controls will no longer operate as visually set and instead, the Astral Destiny will use the stored control settings for each selected preset position. If a control change is made while in Preset Mode, the Activate LED will begin to flash. You can easily save this change by holding down both footswitches until both LED's flash 4 times indicating that the change has been saved.\u003cbr\u003e\u003cbr\u003eDimensions: 4.65 x 3.65 x 2.25 in. (118 x 93 x 57 mm) with knobs\u003cbr\u003eCurrent Draw: 85 mA\u003cbr\u003eInput Impedance: 500 kΩ\u003cbr\u003eOutput Impedance: 100 Ω\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eExpression Jack\u003c\/strong\u003e\u003cbr\u003eUse any TRS expression pedal to take control over the Length, Depth, Rate, Tone, or Mix panel controls! You can also use Control Voltage with the EXP Jack. The CV range is 0 - 3.3v.\u003cbr\u003eEXP Jack Internal Connections:\u003cbr\u003eSleeve= Ground\u003cbr\u003eRing= 3.3v\u003cbr\u003eTip= Wiper (CV)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTails or Full Bypass Switching\u003c\/strong\u003e\u003cbr\u003eAstral Destiny can operate in two different bypass states: Tails or Full Bypass. It comes factory set in Tails Mode which allows the reverb effect to naturally decay after the effect is bypassed and is indicated by a Green Activate LED. Full Bypass will cut the reverb effect completely when the effect is bypassed and is indicated by a Red Activate LED.\u003cbr\u003eAstral Destiny is buffered bypass which means that there will always be an active buffer present and it requires power to pass signal.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eStretch Footswitch\u003c\/strong\u003e\u003cbr\u003eThe Stretch footswitch doubles the length of the reverb effect while adding a temporary change in pitch.\u003cbr\u003eTap for an immediate pitch change.\u003cbr\u003eHold for a temporary pitch bending effect.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAdjusting the speed of the pitch bend\u003c\/strong\u003e\u003cbr\u003eThe speed of the pitch bending effect created by holding the Stretch footswitch can be adjusted by following these steps:\u003cbr\u003e1. Hold down the Stretch footswitch.\u003cbr\u003e2. Turn the Length control clockwise for a longer pitch bend or counterclockwise for a shorter pitch bend.\u003cbr\u003e3. Release the Stretch footswitch once you have selected your desired length.\u003cbr\u003e4. The Stretch footswitch will now operate at the selected speed every time the Astral Destiny is powered on.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003cbr\u003eThis device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":47531433492658,"sku":"ACEARASTRALLTD","price":249.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/toqphp4yggn9xk7huqef.jpg?v=1779959485"},{"product_id":"new-earthquaker-devices-blumes-low-signal-shredder-bass-overdrive-guitar-pedal","title":"New Earthquaker Devices Blumes Low Signal Shredder Bass Overdrive Guitar Pedal","description":"\u003cp\u003eFrom EarthQuaker:\u003cbr\u003e\u003cbr\u003eBlumes is an all-analog tri-mode soft clipping bass overdrive that carries the torch of the classic screamer circuit but has a voice all its own. While embodying most of the characteristics and features of our beloved Plumes Small Signal Shredder, this modified circuit has double the gain and a deeper bass response to retain all the low end. It utilizes internal bipolar power, which gives you more dynamics and all the headroom you could ever desire. The end result is a three-dimensional tone with added clarity that really pushes a nice tube amp over the edge.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eControls\u003c\/strong\u003e:\u003cbr\u003eGain: This controls the amount of drive.\u003cbr\u003eTone: More bass to the left, more middles in the middle and more treble to the right.\u003cbr\u003eLevel: This controls the output volume.\u003cbr\u003eClipping Modes (3-Way Toggle):\u003cbr\u003e-1. Symmetrical LED clipping: more crunch and compression.\u003cbr\u003e-2. No clipping: wide open OpAmp drive for clean boost.\u003cbr\u003e-3. Asymmetrical silicon diode clipping: more transparency with a loose feel.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDesign Notes\u003c\/strong\u003e:\u003cbr\u003eAs a bass player, we understand that you often feel neglected within the hierarchy of band constructs, despite the fact that you hold down the rhythmic foundation and make everyone sound better. So that's why this marvelous yellow box was created specifically for you. But fear not, 6-stringers, this is also the perfect pedal for all of your deep overdrive needs, especially you drop-tuned masters. We see you.\u003cbr\u003e\u003cbr\u003eThis all-analog tri-mode overdrive with soft clipping carries the torch of the classic screamer circuit but has a voice all its own. And thanks to its bipolar power, you'll get more dynamics, clarity, and all the headroom you could ever desire. The end result is a more three-dimensional tone with added clarity that really pushes a nice tube amp over the edge.\u003cbr\u003e\u003cbr\u003eWhile embodying most of the characteristics and features of the Plumes, we went ahead and modified this circuit with double the gain and a deeper bass response to retain all the low end. At lower gain settings, you'll get all of the crunchy tone you love about the original, but once you get above noon on the Gain control, that's where the similarities stop. Now you're in bass country, baby! Get ready to shake some walls and field some angry calls from your neighbors (just send them to voicemail).\u003cbr\u003e\u003cbr\u003eAnd much like the Plumes, this pedal offers three different clipping options for your desired low end face melting needs.\u003cbr\u003e\u003cbr\u003eMode 1 is symmetrical LED clipping that utilizes a pair of light emitting diodes. This is the crunchiest setting the Blumes has to offer. This signal is less compressed and way more open with tons of output for when you really want to go wild.\u003cbr\u003e\u003cbr\u003eMode 2 is a clean pure OpAmp gain boost mode. This eliminates the soft clipping diodes altogether and leaves you with straight OpAmp drive. This will be the loudest output with the fullest frequency response, and can be used as a clean boost when the Gain control is set below 11 o'clock.\u003cbr\u003e\u003cbr\u003eMode 3 is an asymmetrical silicon diode arrangement similar to the stock screamer but with more output and clean clarity, which provides more transparent tone. Using this mode gives a warmer low-end response and lower output. It's fuzzier with half the output and is the most compressed. If you like the fuzzy ends of distortion with a clean undertone, you'll love this setting. We guarantee it.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e:\u003cbr\u003eDimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs\u003cbr\u003eCurrent Draw: 25 mA\u003cbr\u003eInput Impedance: 10 MΩ\u003cbr\u003eOutput Impedance: 100 Ω\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFlexi-Switch Technology\u003c\/strong\u003e\u003cbr\u003eThis device features Flexi-Switch Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.\u003cbr\u003eFor standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.\u003cbr\u003eFor momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.\u003cbr\u003eSince the switching is relay based, it requires power to pass signal.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003cbr\u003eThis device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":47531434770610,"sku":"ACEARBLUMES","price":119.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/f572pzg12pfurkwcqsy9.jpg?v=1779959499"},{"product_id":"new-earthquaker-devices-buffer-splitter-guitar-pedal","title":"New EarthQuaker Devices Buffer Splitter Guitar Pedal","description":"\u003cp\u003eFrom EarthQuaker:\u003cbr\u003e\u003cbr\u003eA buffer is an important tool to combat tone loss with long cable runs or in signal chains running lots of true bypass pedals. The EarthQuaker Devices Buffer\/Splitter uses the same great high 1 Mohm input impedance and low 100 ohm output impedance found in our Buffer\/Preamp to restore your tonal integrity! This buffer is designed to both maintain high end and give your low end a subtle, yet powerful, little kick for some added dimension!\u003cbr\u003e\u003cbr\u003eWhat's better than a single output buffer? A dual output buffer, that's what! Use the EarthQuaker Devices Buffer\/Splitter to split your signal into two and send them anywhere you like! Two amps! Turn a mono signal into a stereo signal! Send one output to your effects and use the other as a dry-through! Remove your tuner from the signal path… you get the idea!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003cbr\u003e3.6875 x 1.8125 x 1.8125 in. (94 x 46 x 46 mm)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCurrent Draw\u003c\/strong\u003e\u003cbr\u003e15 mA\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInput Impedance\u003c\/strong\u003e\u003cbr\u003e1 MΩ\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eOutput Impedance\u003c\/strong\u003e\u003cbr\u003e100 Ω\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003cbr\u003eThis device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel (not included). We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":47531435196594,"sku":"ACEARBUFFERSPLIT","price":89.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/rh3u7swi8jwamvyndefh.jpg?v=1779959513"},{"product_id":"new-earthquaker-devices-cloven-hoof-v2-fuzz-guitar-effects-pedal","title":"New Earthquaker Devices Cloven Hoof V2 Fuzz Guitar Effects Pedal","description":"\u003cp\u003eCloven Hoof V2\u003c\/p\u003e\u003cp\u003eSilicon fuzz\u003c\/p\u003e\u003cp\u003eNOS Carbon comp circuitry\u003c\/p\u003e\u003cp\u003eExtended bass response and higher gain vs. Hoof\u003c\/p\u003e\u003cp\u003e\"Shift\" knob selects center frequency of the \"Tone\" control\u003c\/p\u003e\u003cp\u003eTrue-bypass\u003c\/p\u003e\u003cp\u003eSilent soft-touch switching\u003c\/p\u003e\u003cp\u003eAll-analog dry signal path\u003c\/p\u003e\u003cp\u003eBuilt by qualified cowboys, cowgirls, and rodeo clowns in the organic, grass-fed, farm-to-table cattle ranch of Akron, Ohio, USA, y'all.\u003c\/p\u003e\u003cp\u003eLifetime guarantee\u003c\/p\u003e\u003cp\u003eThe Cloven Hoof is an extension of our popular Hoof fuzz, only more… cloven. We kept the clarity of the Hoof along with the wide range of dirt tones and redesigned everything around it. The Cloven Hoof delivers a grittier, more bass heavy tone with more crunch that can not be achieved with the standard Hoof. We did away with the germanium transistors and replaced them with 4 specially selected silicon transistors for higher gains, cleaner cleans and improved temperature stability. The fuzz control has four times the range of the regular Hoof, it will go from completely clean to an all out fuzz fury with more grind at the top end of the dial. The tone control has been refined to allow a more even sweep with enough mids to handle all the additional low end. The shift control still boosts or cuts the mids and there is still a TON of output on tap. The Cloven Hoof is the perfect solution for those of you who always wished the Hoof had more. Each Cloven Hoof is made by hand in the majestic mountain top village of Akron, Ohio.\u003c\/p\u003e\u003cp\u003eControls\u003c\/p\u003e\u003cp\u003eFuzz: Clockwise for heavy, counterclockwise for light.\u003c\/p\u003e\u003cp\u003eTone: Bass to the left, Treble to the right.\u003c\/p\u003e\u003cp\u003eLevel: Use this control to make the Cloven Hoof louder or quieter.\u003c\/p\u003e\u003cp\u003eShift: This adjusts the mid content, clockwise for scooped mids, counterclockwise for boosted.\u003c\/p\u003e\u003cp\u003eMeasures\u003c\/p\u003e\u003cp\u003e4 5\/8\" x 2 1\/2\" x 2.25\" with knobs\u003c\/p\u003e\u003cp\u003ePower\u003c\/p\u003e\u003cp\u003eA standard 9 volt DC power supply intended for musical instruments with a negative center 2.1mm barrel or a 9v battery. Do not use any generic adapter (anything from RadioShack or similar). Do not run at higher voltages! Current Draw is about 10ma.\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":47531435229362,"sku":"ACEARCLOVENHFV2","price":179.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/htazqnmkvndm9rnkdujc.jpg?v=1779959526"},{"product_id":"new-earthquaker-devices-cloven-hoof-v2-fuzz-guitar-effects-pedal-1","title":"New Earthquaker Devices Cloven Hoof V2 Fuzz Guitar Effects Pedal","description":"\u003cp\u003e\u003cstrong\u003eIncludes one Fender Custom Shop Tweed 10-foot instrument cable and one 6-inch patch cable\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCloven Hoof V2\u003c\/p\u003e\u003cp\u003eSilicon fuzz\u003c\/p\u003e\u003cp\u003eNOS Carbon comp circuitry\u003c\/p\u003e\u003cp\u003eExtended bass response and higher gain vs. Hoof\u003c\/p\u003e\u003cp\u003e\"Shift\" knob selects center frequency of the \"Tone\" control\u003c\/p\u003e\u003cp\u003eTrue-bypass\u003c\/p\u003e\u003cp\u003eSilent soft-touch switching\u003c\/p\u003e\u003cp\u003eAll-analog dry signal path\u003c\/p\u003e\u003cp\u003eBuilt by qualified cowboys, cowgirls, and rodeo clowns in the organic, grass-fed, farm-to-table cattle ranch of Akron, Ohio, USA, y'all.\u003c\/p\u003e\u003cp\u003eLifetime guarantee\u003c\/p\u003e\u003cp\u003eThe Cloven Hoof is an extension of our popular Hoof fuzz, only more… cloven. We kept the clarity of the Hoof along with the wide range of dirt tones and redesigned everything around it. The Cloven Hoof delivers a grittier, more bass heavy tone with more crunch that can not be achieved with the standard Hoof. We did away with the germanium transistors and replaced them with 4 specially selected silicon transistors for higher gains, cleaner cleans and improved temperature stability. The fuzz control has four times the range of the regular Hoof, it will go from completely clean to an all out fuzz fury with more grind at the top end of the dial. The tone control has been refined to allow a more even sweep with enough mids to handle all the additional low end. The shift control still boosts or cuts the mids and there is still a TON of output on tap. The Cloven Hoof is the perfect solution for those of you who always wished the Hoof had more. Each Cloven Hoof is made by hand in the majestic mountain top village of Akron, Ohio.\u003c\/p\u003e\u003cp\u003eControls\u003c\/p\u003e\u003cp\u003eFuzz: Clockwise for heavy, counterclockwise for light.\u003c\/p\u003e\u003cp\u003eTone: Bass to the left, Treble to the right.\u003c\/p\u003e\u003cp\u003eLevel: Use this control to make the Cloven Hoof louder or quieter.\u003c\/p\u003e\u003cp\u003eShift: This adjusts the mid content, clockwise for scooped mids, counterclockwise for boosted.\u003c\/p\u003e\u003cp\u003eMeasures\u003c\/p\u003e\u003cp\u003e4 5\/8\" x 2 1\/2\" x 2.25\" with knobs\u003c\/p\u003e\u003cp\u003ePower\u003c\/p\u003e\u003cp\u003eA standard 9 volt DC power supply intended for musical instruments with a negative center 2.1mm barrel or a 9v battery. Do not use any generic adapter (anything from RadioShack or similar). Do not run at higher voltages! Current Draw is about 10ma.\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":47531435262130,"sku":"ACEARCLOVENHFV2F0","price":187.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/mqg2ykegen6k6i8kvq0c.png?v=1779959542"},{"product_id":"new-earthquaker-devices-the-depths-optical-vibe-guitar-effects-pedal","title":"New Earthquaker Devices The Depths Optical Vibe Guitar Effects Pedal","description":"\u003cp\u003e\u003cstrong\u003eIncludes one Fender Custom Shop Tweed 10-foot instrument cable and two 6-inch patch cables\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAnalog Optical Vibe Machine\u003c\/p\u003e\u003cp\u003eAhoy! Welcome to your new Depths™ Optical Vibe Machine! The Depths is our take on the classic optical vibe circuit. Now you can swab the decks with the same lush, pulsating, three-dimensional swirling sound you know and love, with some modern accouterments for all you land-lubbers out there.\u003c\/p\u003e\u003cp\u003eThe Depths is optimized for use with all kinds of instruments, pickups, and to play well with dirt, so nobody's left waiting on shore. If it's got a ¼\" output, plug it in and get deep!\u003c\/p\u003e\u003cp\u003eIn addition to the classic vibe controls, the Depths features unique controls for \"Voice\" and \"Throb.\" The \"Voice\" control adjusts the midrange focus of the Depths, which is perfect for tailoring the effect to your particular instrument. Clockwise, you'll hear a fuller sound with a low-end focus. Counter-clockwise, you'll hear a thinner, spikier sound with a forward upper-midrange bite. The \"Throb\" knob adds a hefty subharmonic low-end pulse to the vibrato signal, which is especially useful on synthesizers and the bass guitar. It sounds great with a little bit of dirt on the neck pickup of a guitar, too! This works best with the \"Voice\" turned counter-clockwise for a warmer tone.\u003c\/p\u003e\u003cp\u003eThe Depths' \"Intensity\" and \"Rate\" controls are dialed in to give you the classic optical vibe sound at more modest settings, but dive in deeper and you'll find anything from a smooth ultra-slow warble to sharp, speedy bursts! Also, the \"Level\" control has tons of output above unity on tap to combat the perceived volume loss of most vibe pedals, so your tone is always above water. And, if 9v isn't enough to keep you afloat, the Depths may be powered at 18v for a stiffer tone with more headroom and sparkle.\u003c\/p\u003e\u003cp\u003eThe Depths is true-bypass, uses rusty all-analog circuitry, and is built one-at-a-time aboard the wreckage of the SS Minnow, currently dry-docked in Akron, Ohio, USA.\u003c\/p\u003e\u003cp\u003eControls\u003c\/p\u003e\u003cp\u003eVoice- Dials in the overall sound. Turn it clockwise for a fuller sound with more lows, bring it back for a thinner, more midrange focused tone.\u003c\/p\u003e\u003cp\u003eThrob- This controls the low end pulse. It may not be immediately evident on the bridge pickup, but switch to the neck or add some dirt and it comes alive. All the way up for more throb, dial it back for less. Works best when the \"Voice\" is set to a warmer tone.\u003c\/p\u003e\u003cp\u003eIntensity- This controls how subtle or intense the overall effect is. Counter clockwise from noon are the more subtle, classic sounds. Clockwise from noon are the more drastic and intense sounds.\u003c\/p\u003e\u003cp\u003eRate- Controls the speed of the effect. Counterclockwise for slow, clockwise for fast.\u003c\/p\u003e\u003cp\u003eLevel- Controls the volume of the effect. Unity is around 1 o'clock, everything above that is boost.\u003c\/p\u003e\u003cp\u003eSuggested setting for \"classic\" vibe sound:\u003c\/p\u003e\u003cp\u003eRun at 9v, Intensity- 11-12 o'clock, Voice- 3 o'clock, Throb- 2 o'clock, Rate and Level set to taste. All the controls are highly interactive with each other, so experiment to find your tone!\u003c\/p\u003e\u003cp\u003eFlexi-Switching\u003c\/p\u003e\u003cp\u003eThis device features Flexi-Switch™ Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.\u003c\/p\u003e\u003cp\u003eFor standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.\u003c\/p\u003e\u003cp\u003eFor momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.\u003c\/p\u003e\u003cp\u003eSince the switching is relay based, it requires power to pass signal.\u003c\/p\u003e\u003cp\u003eMeasures\u003c\/p\u003e\u003cp\u003e4.75\" x 2.50\" x 2.25\" with knobs\u003c\/p\u003e\u003cp\u003ePower\u003c\/p\u003e\u003cp\u003eThe Depths should be powered by a standard 9-18 volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise.\u003c\/p\u003e\u003cp\u003eCurrent Draw: 50mA\u003cbr\u003eInput impedance: 1M\u003cbr\u003eOutput impedance: \u0026lt;1K\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":47531436671154,"sku":"ACEARDEPTHSV2F2","price":207.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/hjwxkl4feoks8ciasagv.jpg?v=1779959558"},{"product_id":"new-earthquaker-devices-disaster-transport-reissue-delay-guitar-effects-pedal","title":"New EarthQuaker Devices Disaster Transport Reissue Delay Guitar Effects Pedal","description":"\u003cp\u003eFrom EarthQuaker:\u003cbr\u003e\u003cbr\u003eThe Original Delay Modulation Machine\u003cbr\u003eLimited to 3,500 units worldwide. Behold! The newest incarnation of one of our most beloved pedals ever, the Disaster Transport. For those of you well versed in the pedal's celebrated history, you might notice some differences on this beautifully sparkly box. A new Mod Mode switch allows you to bend or stretch the modulation wave. The new Mod Speed switch offers three rates of modulation, from bizarrely animated gradual climbs and steep drop offs to rapid chorus and intense vibrato.\u003cbr\u003e\u003cbr\u003eThe delay line has been redesigned to reduce the noise floor and improve the quality of the delay. Plus, it's now filtered to sound more like an analog delay than any of the previous versions. With knobs to control the Speed, Intensity, Mix, Repeats, and Time; this analog-voiced digital delay sits perfectly in the background with an evolved ambiance, but can also be dialed in for the dramatic effect of your choosing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDesign Notes:\u003c\/strong\u003e\u003cbr\u003eWe initially set out to recreate the original Disaster Transport pedal in its earliest form, but the OG of EQD, Jamie Stillman, couldn't resist tinkering and improving the whole thing, so you just got upgraded, my friend. In doing so, we redesigned the delay line to reduce the noise floor and improve the quality of the delay. We boosted the output with a cleaner mixing section; it's now filtered to sound more like an analog delay than any of the previous versions.\u003cbr\u003e\u003cbr\u003eWe've added a Mod Mode switch that allows you to choose between bending and stretching the modulation wave. The Bend setting offers a subtler vibe closer to a traditional chorus sound, while the new Stretch option gives you loads of pitch-stretching modulation to run wild with.\u003cbr\u003e\u003cbr\u003eThe other difference you probably spotted with your eagle eye is the Mod Speed three-position toggle switch. The Slow setting is excruciatingly slow and can produce bizarrely animated gradual climbs and steep drop offs. The Fast setting can go from a rapid chorus to an intense vibrato, while the Medium setting is the most traditional rate similar to the classic Memory Man circuit with a nice range to it.\u003cbr\u003e\u003cbr\u003eThe newly designed enclosure features knobs to control the Speed, Intensity, Mix, Repeats, and Time, with Modulate and Activate switches, making this a highly customizable pedal to get the delay sound of your dreams. Thanks to the ramp modulation circuitry, you can turn the delay time down and start to use feedback and modulation at a higher setting to harness a bizarre modulator and achieve subtle to wild chorus-type effects. Or set your delay time how you want to set it and use your modulation rates to set your tempo, so you can strum or pluck to the climbs and drop offs to match your riffs. The possibilities are endless.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eControls\u003c\/strong\u003e:\u003cbr\u003e1. Speed: Controls the speed of the modulation. The Speed operates in three ranges (Slow\/Fast\/Medium) selected by the Mod Speed toggle switch. The Disaster Transport uses a Ramp wave for the modulation. You'll find this to be much more intense than most modulated delays. Think of it as a traditional Triangle wave that falls off a cliff in mid-cycle, creating a drastic pitch bend in its wake. Or don't and just think about whatever you want.\u003cbr\u003e\u003cbr\u003e2. Intensity: Controls how much the LFO modulates the delay time. More subtle chorus type effects are achieved with less intensity and more intensity will yield wild pitch stretching and bending. The overall modulation style can be made more or less subtle by using the Mod Mode toggle switch to select Bend or Stretch.\u003cbr\u003e\u003cbr\u003e3. Mix: Sets the volume level for the delay signal. Hear more of what you just played 30-600ms ago by turning this up.\u003cbr\u003e\u003cbr\u003e4. Repeats: Controls the intensity of delay feedback from no repeats at zero to self-oscillation at max. Let the past pile up on you until it implodes.\u003cbr\u003e\u003cbr\u003e5. Time: Sets the delay time from around 30ms at zero to 600ms* at max. Everyone needs more time; all we can offer you is about 600ms worth.\u003cbr\u003e\u003cbr\u003e6. Mod Speed: Three position toggle switch that sets the range in which the Speed operates.\u003cbr\u003e\u003cbr\u003e7. Mod Mode: Two position toggle switch to choose the modulation style. Bend is more of a traditional chorus type modulation and Stretch is a wilder pitch stretching modulation.\u003cbr\u003e\u003cbr\u003e8. Modulate: This foot-operated switch features Flexi-Switch® Technology and turns the modulation on and off.\u003cbr\u003e\u003cbr\u003e9. Activate: This foot-operated switch features Flexi-Switch® Technology and turns the effect on and off.\u003cbr\u003e\u003cbr\u003e*The delay time for the Disaster Transport Legacy Reissue can vary based on different settings and individual units.\u003cbr\u003e\u003cbr\u003eThe actual delay time is influenced by several factors, with one of the most significant being the Modulation setting. If the Modulation is active, the delay time will automatically be shorter due to the parameters that determine the delay. The specified approximate delay time of 600 ms is based on the Modulation being set to off.\u003cbr\u003e\u003cbr\u003eOther factors affecting the delay time include the Intensity setting and the IC (Integrated Circuit) itself that controls it. The pt2399 is an older and unique IC, which can have variable tolerances. As a result, some units may produce longer delay times compared to others.\u003cbr\u003e\u003cbr\u003eDimensions: 3.65 x 4.65 x 2.25 in. (93 x 118 x 57 mm) with knobs\u003cbr\u003eCurrent Draw: 35 mA\u003cbr\u003eInput Impedance: 1 MΩ\u003cbr\u003eOutput Impedance: 1 kΩ\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFlexi-Switch Technology\u003c\/strong\u003e\u003cbr\u003eThis device features Flexi-Switch Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.\u003cbr\u003eFor standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.\u003cbr\u003eFor momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.\u003cbr\u003eSince the switching is relay based, it requires power to pass signal.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003cbr\u003eThis device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":47531437031602,"sku":"ACEARDSASTRXPRT","price":179.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/wuigzxqx8imi52hvjll6.jpg?v=1779959572"},{"product_id":"new-earthquaker-devices-dunes-v2-overdrive-guitar-effects-pedal","title":"New Earthquaker Devices Dunes V2 Overdrive Guitar Effects Pedal","description":"\u003cp\u003eMini Mega Ultimate Overdrive\u003c\/p\u003e\u003cp\u003eWay back in 2014, we did something we said we would never do. We made a Tubes Creamer. But we didn't make just any old TS-808 clone - we made the Palisades™, the end-all, be-all of transparent mid-boosting overdrives. A Mega Ultimate Overdrive, if you will.\u003c\/p\u003e\u003cp\u003eLurking inside that massive bedazzled enclosure was every conceivable 808 mod under the sun. And a second gain channel. And a clean boost. We did our rightful duty to you, the musician, by offering you true Freedom of Choice to mix and match clipping diodes and capacitors as you see fit in order to develop your own unique overdriven voice. And you did. All except those few spuds in the back who said to us, \"But EarthQuaker Devices, we want Freedom from Choice!\" And so we listened. We made a Mini Mega Ultimate Overdrive.\u003c\/p\u003e\u003cp\u003eThe Dunes™ is a condensed take on our highly popular Palisades \"808-style\" overdrive. We've stripped away all the glitz and glamour of the original Palisades, leaving only the bare essentials required for a rippin' mid-boosting transparent overdrive. It has all the great tone of the grown-up Palisades but with a simplified interface and a smaller footprint!\u003c\/p\u003e\u003cp\u003eThe Dunes features the same Gain, Tone and Level controls as the Palisades, along with our favorite voice and bandwidth settings, as well as the \"Normal \/ Bright\" toggle.\u003c\/p\u003e\u003cp\u003eThe selectable clipping Voices are: \"MOSFET\" for a tight crunchy sound (Palisades' Setting 3); \"Silicon\" Asymmetrical clipping for tighter light gain OD closest to the classic 808 sound (Palisades' Setting 4), and \"None,\" which goes from clean boost to gritty, pure op-amp distortion with a massive volume boost (Palisades' Setting 1).\u003c\/p\u003e\u003cp\u003eThe two Bandwidth settings are \"stock\" for the classic tone (Palisades' Setting 3) and \"full range\" for more low end (Palisades' Setting 5).\u003c\/p\u003e\u003cp\u003eEach and every Dunes is true-bypass, uses silent relay-based switching, and is built one-at-a-time in sandy Akron, Ohio, USA.\u003c\/p\u003e\u003cp\u003eControls\u003c\/p\u003e\u003cp\u003eGain: Adjusts the drive, dirtier clockwise, cleaner counter-clockwise\u003c\/p\u003e\u003cp\u003eTone: Brighter clockwise, warmer counter clockwise\u003c\/p\u003e\u003cp\u003eLevel: Sets the output level\u003c\/p\u003e\u003cp\u003eNormal\/Bright: Normal is a warm full tone, Bright is livelier tone with more chime\u003c\/p\u003e\u003cp\u003eBandwidth: Left is brighter with more emphasis on the mids, Right is full range for more low end\u003c\/p\u003e\u003cp\u003eVoice: MF- MOSFET diode clipping, N- No diode clipping, Si- Silicon diode clipping\u003c\/p\u003e\u003cp\u003eMeasures\u003c\/p\u003e\u003cp\u003e4.75\" x 2.50\" x 2.25\" with knobs\u003c\/p\u003e\u003cp\u003ePower\u003c\/p\u003e\u003cp\u003eThe Dunes should be powered by a standard 9-volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. Do not run at higher voltages!\u003c\/p\u003e\u003cp\u003eCurrent Draw: 30mA\u003cbr\u003eInput impedance: 500K\u003cbr\u003eOutput impedance: 1K\u003c\/p\u003e\u003cp\u003eSwitching\u003c\/p\u003e\u003cp\u003eThis device is true bypass and uses electronic relay based switching. Audio will not pass without power.\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":47531437064370,"sku":"ACEARDUNESV2","price":189.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/xjt9gohpvyn2gdncjrtk.jpg?v=1779959586"},{"product_id":"new-earthquaker-devices-dunes-v2-overdrive-guitar-effects-pedal-1","title":"New Earthquaker Devices Dunes V2 Overdrive Guitar Effects Pedal","description":"\u003cp\u003e\u003cstrong\u003eIncludes one Fender Custom Shop Tweed 10-foot instrument cable and two 6-inch patch cables\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMini Mega Ultimate Overdrive\u003c\/p\u003e\u003cp\u003eWay back in 2014, we did something we said we would never do. We made a Tubes Creamer. But we didn't make just any old TS-808 clone - we made the Palisades™, the end-all, be-all of transparent mid-boosting overdrives. A Mega Ultimate Overdrive, if you will.\u003c\/p\u003e\u003cp\u003eLurking inside that massive bedazzled enclosure was every conceivable 808 mod under the sun. And a second gain channel. And a clean boost. We did our rightful duty to you, the musician, by offering you true Freedom of Choice to mix and match clipping diodes and capacitors as you see fit in order to develop your own unique overdriven voice. And you did. All except those few spuds in the back who said to us, \"But EarthQuaker Devices, we want Freedom from Choice!\" And so we listened. We made a Mini Mega Ultimate Overdrive.\u003c\/p\u003e\u003cp\u003eThe Dunes™ is a condensed take on our highly popular Palisades \"808-style\" overdrive. We've stripped away all the glitz and glamour of the original Palisades, leaving only the bare essentials required for a rippin' mid-boosting transparent overdrive. It has all the great tone of the grown-up Palisades but with a simplified interface and a smaller footprint!\u003c\/p\u003e\u003cp\u003eThe Dunes features the same Gain, Tone and Level controls as the Palisades, along with our favorite voice and bandwidth settings, as well as the \"Normal \/ Bright\" toggle.\u003c\/p\u003e\u003cp\u003eThe selectable clipping Voices are: \"MOSFET\" for a tight crunchy sound (Palisades' Setting 3); \"Silicon\" Asymmetrical clipping for tighter light gain OD closest to the classic 808 sound (Palisades' Setting 4), and \"None,\" which goes from clean boost to gritty, pure op-amp distortion with a massive volume boost (Palisades' Setting 1).\u003c\/p\u003e\u003cp\u003eThe two Bandwidth settings are \"stock\" for the classic tone (Palisades' Setting 3) and \"full range\" for more low end (Palisades' Setting 5).\u003c\/p\u003e\u003cp\u003eEach and every Dunes is true-bypass, uses silent relay-based switching, and is built one-at-a-time in sandy Akron, Ohio, USA.\u003c\/p\u003e\u003cp\u003eControls\u003c\/p\u003e\u003cp\u003eGain: Adjusts the drive, dirtier clockwise, cleaner counter-clockwise\u003c\/p\u003e\u003cp\u003eTone: Brighter clockwise, warmer counter clockwise\u003c\/p\u003e\u003cp\u003eLevel: Sets the output level\u003c\/p\u003e\u003cp\u003eNormal\/Bright: Normal is a warm full tone, Bright is livelier tone with more chime\u003c\/p\u003e\u003cp\u003eBandwidth: Left is brighter with more emphasis on the mids, Right is full range for more low end\u003c\/p\u003e\u003cp\u003eVoice: MF- MOSFET diode clipping, N- No diode clipping, Si- Silicon diode clipping\u003c\/p\u003e\u003cp\u003eMeasures\u003c\/p\u003e\u003cp\u003e4.75\" x 2.50\" x 2.25\" with knobs\u003c\/p\u003e\u003cp\u003ePower\u003c\/p\u003e\u003cp\u003eThe Dunes should be powered by a standard 9-volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. Do not run at higher voltages!\u003c\/p\u003e\u003cp\u003eCurrent Draw: 30mA\u003cbr\u003eInput impedance: 500K\u003cbr\u003eOutput impedance: 1K\u003c\/p\u003e\u003cp\u003eSwitching\u003c\/p\u003e\u003cp\u003eThis device is true bypass and uses electronic relay based switching. Audio will not pass without power.\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":47531437097138,"sku":"ACEARDUNESV2F2","price":197.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/u654goxsumixpbo7qpxq.jpg?v=1779959601"},{"product_id":"new-earthquaker-gary-automatic-pulse-width-modulation-fuzz-overdrive-pedal","title":"New EarthQuaker Gary Automatic Pulse Width Modulation Fuzz \u0026 Overdrive Pedal","description":"\u003cp\u003eFrom EarthQuaker:\u003cbr\u003e\u003cbr\u003eEarthQuaker Devices is proud to introduce you to your new best bud, Gary. This little big guy was dreamt up by the one and only Lee Kiernan from the crushing and most necessary band IDLES!\u003cbr\u003e\u003cbr\u003eGary started as a simple request to create a compact version of the now discontinued Gray Channel, which was a mainstay on Lee's board and a big part of his main drive tone. This was all fine and good, and sounded quite sick, but Gary was demanding that we look deeper and explore his dark side a little more, Gary after dark, Saturday night Gary. So, we sat him down and began the trek of figuring out old Gare-Bear once and for all. The result is a dynamic and destructive pulse width modulated fuzz paired with a natural-sounding op-amp overdrive.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDesign Notes\u003c\/strong\u003e\u003cbr\u003eGary's right brain consists of a dynamic and destructive fuzz that is both domineering and interactive. It is a ripping fuzz tone with an envelope-controlled variable pulse width and enough volume to blow everything up. This nasty little fuzz turns the signal into a square wave and allows you to dynamically adjust the duty cycle with pick attack. Yes! controls the sensitivity of the envelope. When this is all the way down you will get an unadulterated thick and heavy square wave fuzz tone that will sustain for days and go dead quiet when you stop playing. As you increase the Yes! control, the envelope becomes more interactive, and the pulse width narrows the harder you hit it. As the pulse width narrows, the tone becomes more nasal and biting until it gets so narrow that Gary goes to his dark place and disappears completely. In other words, with higher sensitivity settings, the sound will disappear entirely and come cruising back to Gary's big guy tone. With proper playing dynamics, this creates a very cool effect that can sound like an exploding amp coming in and out of life, blown through a phase shifter.\u003cbr\u003e\u003cbr\u003eGary's left brain displays his softer side. This is a simple and natural sounding overdrive that keeps your tone lively and drives your amp crazy. This side is based on the green channel of our Gray Channel, which is our take on the classic little yellow overdrive that started it all for us. Lee used this pedal with the clipping switch permanently set to the middle position, which removes all the diodes from the circuit, producing a full-bodied, cutting opamp distortion with plenty of volume on tap. We have reproduced that tone here with exacting precision. Go sets the opamp drive and can range from a simple full-range clean boost all the way up to a smooth and natural distortion. In conjunction with That's It, which is the master volume for the drive side, you can use Gary's softer side as a clean boost to push your amp into overdrive or turn up Go and use all of Gary's internal magic to create the finely tuned dirt you desire.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eControls\u003c\/strong\u003e\u003cbr\u003eGo: Gain control for the overdrive. Turn this up to increase the opamp gain to a thick and full distortion, or turn it down and turn up That's It to use it as a clean boost.\u003cbr\u003e\u003cbr\u003eThat's It: Master volume for the overdrive side.\u003cbr\u003e\u003cbr\u003eLeft Footswitch: Overdrive\u003cbr\u003e\u003cbr\u003eYes!: Sets the sensitivity for the envelope that controls the duty cycle for the square wave fuzz. The envelope is highly dependent on the level of the incoming signal, which can be affected by any gain pedals in front of Gary, pickup strength, source instrument, etc.\u003cbr\u003e\u003cbr\u003eOosh: Master volume for the fuzz side.\u003cbr\u003e\u003cbr\u003eRight Footswitch: Fuzz\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eDimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs\u003cbr\u003eCurrent Draw: 20 mA\u003cbr\u003eFuzz: Input Impedance: 1 MΩ, Output Impedance: \u0026lt;1 kΩ\u003cbr\u003eOverdrive: Input Impedance: 500 kΩ, Output Impedance: \u0026lt;1 kΩ\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTRS expression pedal wiring\u003c\/strong\u003e\u003cbr\u003eTip: Wiper\u003cbr\u003eRing: +3.3V\u003cbr\u003eSleeve: Ground\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFlexi-Switch Technology\u003c\/strong\u003e\u003cbr\u003eThis device features Flexi-Switch Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.\u003cbr\u003eFor standard latching operation: tap the footswitch once to activate the effect and then tap again to bypass.\u003cbr\u003eFor momentary operation: hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.\u003cbr\u003eSince the switching is relay based, it requires power to pass signal.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003cbr\u003eThis device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel (not included). We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eArtwork\u003c\/strong\u003e\u003cbr\u003eArtwork by Charlotte Gosch, studio other types\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":47531437785266,"sku":"ACEARGARY","price":199.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/e7bkyifv8ysjwjrahzu1.jpg?v=1779959616"},{"product_id":"new-open-box-earthquaker-devices-ghost-echo-v3-brain-dead-limited-edition-reverb-pedal","title":"Open Box EarthQuaker Devices Ghost Echo V3 Brain Dead Limited Edition Reverb Pedal","description":"\u003cp\u003eFrom EarthQuaker Devices:\u003c\/p\u003e\u003cp\u003eEQD has joined forces with Brain Dead, the L.A.-based creative studio, for an ultra-cool collaboration featuring a special, limited colorway of the Ghost Echo Vintage Voiced Reverb!\u003c\/p\u003e\u003cp\u003eThe Brain Dead creative brain trust has worked with an array of artists, musicians, brands, and companies on one-off runs featuring their colorful combinations of low- and high-brow art drawn from the international street and subcultures they love and celebrate. Here at EQD, we are also inspired by much of the same cinema, music, comics, and all left-of-center forms of art and media as the Brain Dead folks. We think Brain Dead's eye-mesmerizing graphics pair perfectly with the sound-expanding Ghost Echo, turning it into genuinely functional art. In addition to the unique colorway, Brain Dead has specially designed some colorful and special packaging for the pedal. The Brain Dead Ghost Echo is a limited production run.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eGhost Echo V3 - Vintage Voiced Reverb\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Ghost Echo is our spooky take on the haunted amp-top spring reverberation units of yesteryear. This analog\/digital spring reverb emulation machine boasts 30ms - 150ms of pre-delay, controllable via the Attack knob, for everything from a quick rockabilly slapback to viscous pools of ectoplasmic reverberations. When playing staccato, you'll hear the tortured trails of the reverb, resulting in more of a slapback or echo sound. Legato playing will reveal a massive ambient \"depth\" that fattens up the sound. The Dwell control sets the length and thickness of the decay; at the maximum setting it will descend into an infinite loop of self-oscillation. The Depth sets the intensity of the reverb (the wet\/dry mix).\u003c\/p\u003e\u003cp\u003e\u003cb\u003eControls:\u003c\/b\u003e\u003cbr\u003e1. Attack: Adjusts the length of the pre-delay, from 30ms at minimum to about 150ms at maximum. When the Dwell is set to self-oscillate, this will change the pitch of the oscillations.\u003cbr\u003e2. Dwell: Adjusts the length of the decay. This will start to self oscillate around 3 o'clock; the pitch of the oscillations can be changed by turning the Attack control.\u003cbr\u003e3. Depth: Mixes in the wet signal with the dry. Unity is around noon and everything after is boosted.\u003c\/p\u003e\u003cp\u003eDimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs\u003cbr\u003eCurrent Draw: 86 mA\u003cbr\u003eInput Impedance: 10 MΩ\u003cbr\u003eOutput Impedance: 1 kΩ\u003c\/p\u003e\u003cp\u003e\u003cb\u003eSwitching\u003c\/b\u003e\u003cbr\u003eThis device is true bypass and uses electronic relay-based switching. Audio will not pass without power.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePower\u003c\/b\u003e\u003cbr\u003eThis device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. DO NOT RUN AT HIGHER VOLTAGES!\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":47531438571698,"sku":"ACEARGHOSTV3BD","price":189.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/bt05criydj8q5l9dlyfp.jpg?v=1779959625"},{"product_id":"new-earthquaker-devices-hoof-reaper-v2-dual-fuzz-guitar-effects-pedal","title":"New EarthQuaker Devices Hoof Reaper V2 Dual Fuzz Guitar Effects Pedal","description":"\u003cp\u003eFrom EarthQuaker Devices:\u003c\/p\u003e\u003cp\u003e\u003cb\u003eDouble Fuzz with Octave Up\u003c\/b\u003e\u003cbr\u003eThe Hoof Reaper features our popular Hoof and Tone Reaper fuzz pedals in one handy enclosure with the added bonus of an old school analog octave up. It was originally released as a special limited run item back in 2010 and demand was so high that we decided to reintroduce it back into our line. Capable of creating everything from subtle octave-up overtones through crushing octave squalls that simulate exploding stacks of amps. Each effect can be used individually as well as in series but the order of effects is preset for optimum performance.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eControls:\u003c\/b\u003e\u003cbr\u003eHoof\u003cbr\u003e1. Level: Controls the output volume\u003cbr\u003e2. Fuzz: Controls sustain and gain\u003cbr\u003e3. Tone: Treble to the right. Bass to the left\u003cbr\u003e4. Shift: Controls the mid frequencies. More pronounced to the left. Scooped to the right.\u003cbr\u003eTone Reaper\u003cbr\u003e5. Level: Controls the output volume\u003cbr\u003e6. Fuzz: Controls the sustain and nature\u003cbr\u003e7. Tone: Treble to the left. Bass to the right\u003c\/p\u003e\u003cp\u003e\u003cb\u003eAvailable Switching Combos\u003c\/b\u003e\u003cbr\u003eHoof Alone\u003cbr\u003eReaper Alone\u003cbr\u003eOctave Alone\u003cbr\u003eReaper + Octave\u003cbr\u003eHoof + Octave\u003cbr\u003eHoof + Reaper\u003cbr\u003eHoof + Reaper + Octave\u003c\/p\u003e\u003cp\u003eUse the individual switches to activate the level of mayhem you wish to unleash.\u003c\/p\u003e\u003cp\u003eHoof\u003cbr\u003eOur flagship device! The Hoof is a no-fuss, easy-to-use device capable of sounds from warm, gritty overdrive to a huge, sustaining fuzz. It's a germanium\/silicon hybrid Muff-style fuzz (based on the old green Russian muff) with massive amounts of volume on tap and smooth amp-like sustain. It has a tighter, cleaner sound than most Muffs which makes it more cutting and discernible in a band setting. The shift control is the key to the Hoof's character; it alters the frequency response of the tone control. Clockwise scoops the mids and counterclockwise enhances the mids.\u003c\/p\u003e\u003cp\u003eTone Reaper\u003cbr\u003eThe Tone Reaper is a vintage style fuzz device based on the \"3 knob\" bender. It's a silicon\/germanium hybrid capable of producing a wide range of tones from every bender era with careful tweaking of the Tone and Fuzz controls. From thin and spitty, to thick, growling sustain; it's all here.\u003c\/p\u003e\u003cp\u003eOctave\u003cbr\u003eThis is a classic monophonic octave up that will add a swelling octave to the fuzz tone! Since it is monophonic, the effect will be more pronounced when using the neck pickup and playing above the 12th fret.\u003c\/p\u003e\u003cp\u003eDimensions: 4.75 x 5.65 x 2.25 in. (121 x 144 x 57 mm) with knobs\u003cbr\u003eCurrent Draw: 18 mA\u003c\/p\u003e\u003cp\u003eHoof\u003cbr\u003eInput Impedance: 130 kΩ\u003cbr\u003eOutput Impedance: \u0026lt;10 kΩ\u003c\/p\u003e\u003cp\u003eTone Reaper\u003cbr\u003eInput Impedance: 47 kΩ\u003cbr\u003eOutput Impedance: \u0026lt;1 kΩ\u003c\/p\u003e\u003cp\u003eOctave\u003cbr\u003eInput Impedance: 160 kΩ\u003cbr\u003eOutput Impedance: \u0026lt;10 kΩ\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFlexi-Switch Technology\u003c\/b\u003e\u003cbr\u003eThis device features Flexi-Switch Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching. For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass. For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed. Since the switching is relay based, it requires power to pass signal.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePower\u003c\/b\u003e\u003cbr\u003eThis device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. DO NOT RUN AT HIGHER VOLTAGES!\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":47531438768306,"sku":"ACEARHOOFREAPERV2","price":299.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/fdm5gvaiqzbhsctqwomw.jpg?v=1779959637"},{"product_id":"new-earthquaker-devices-sunn-o-life-pedal-v3-limited-edition-sapphire-blue","title":"New Earthquaker Devices Sunn O))) Life Pedal V3 Limited Edition Sapphire Blue","description":"\u003cp\u003eFrom EarthQuaker Devices:\u003c\/p\u003e\u003cp\u003e\u003cb\u003eOctave Distortion + Booster\u003c\/b\u003e\u003cbr\u003eSunn O))) and EarthQuaker Devices are pleased to bring you the Sunn O))) Life Pedal V3. The Sunn O))) Life Pedal circuit has been meticulously tweaked from the original to squeeze every last drop of heavy crushing tone available. The octave section has been fine tuned to make it more pronounced without losing the bottom end and we added a third footswitch, utilizing Flexi-Switch Technology, for the octave to allow an additional method of quick and radical tone shaping.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat Is It?\u003c\/b\u003e\u003cbr\u003eSunn O))) Life Pedal is a distortion with a blendable analog octave up and a booster combined in one compact package. The \"Amplitude\" side is faithfully modeled after the classic \"White Face\" distortion unit, using modern, reliable components to last a lifetime. The only modifications made to the original circuit are in the clipping section. The traditional circuit uses a single pair of silicon diodes for a tight, compressed crunch. The Sunn O))) Life Pedal introduces two additional clipping options: no diodes for full, grinding OpAmp assault at maximum volume; two silicon diodes and one LED in an asymmetrical clipping configuration for a slightly compressed and smooth crunch similar to a valve amplifier; and the stock double silicon diode configuration for that classic tone you know and love.\u003c\/p\u003e\u003cp\u003eThe Octave in the Sunn O))) Life Pedal is an all-discrete, analog full-wave rectifier based on a classic vintage design. Located at the input of the circuit, the Octave control slowly blends in the octave effect as you turn it clockwise. This feature can also be used via expression control allowing for wild, hands-free octave swells mid-riff. Because this is an analog octave effect, it is monophonic and works best playing single notes above the twelfth fret while using the neck pickup. The \"Magnitude\" section is a simple all-discrete MOSFET booster designed to blast your preamp tubes and drive them wild. It is a 100% clean, high impedance booster that adds very little color to your tone.\u003c\/p\u003e\u003cp\u003eThe signal path goes Octave \u0026gt; Distortion \u0026gt; Boost. The octave distortion and booster can be used independently with their own respective footswitches.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eControls\u003c\/b\u003e\u003cbr\u003eOctave: Blends in the analog octave as you turn it clockwise.\u003cbr\u003eDistortion: Turn clockwise for more distortion, counterclockwise for less. This provides about +60dB of gain.\u003cbr\u003eFilter: A low pass filter with a frequency response from around 500Hz to 30kHz. Turn counterclockwise for more high-end, clockwise for less.\u003cbr\u003eAmplitude: Output volume for the octave distortion side.\u003cbr\u003eClipping Switch: OpAmp (no diodes), Asymm (two silicon diodes and one LED, asymmetrical), Symm (stock double silicon diode).\u003cbr\u003eMagnitude: Output volume for the booster. Unity is somewhere right around noon on the dial.\u003cbr\u003eAmplitude Footswitch: Distortion Activator\u003cbr\u003eMagnitude Footswitch: Boost Activator\u003cbr\u003eOctave Footswitch: Octave Activator. The octave does not work independently; the distortion (\"Amplitude\") must be active.\u003cbr\u003eOctave EXP: Connect any expression pedal to this input to control the analog octave blend.\u003c\/p\u003e\u003cp\u003eDimensions: 4.75 x 5.65 x 2.25 in. (121 x 144 x 57 mm) with knobs\u003cbr\u003eCurrent Draw: 15 mA\u003cbr\u003eOctave Distortion: Input Impedance: 1 MΩ \/ Output Impedance: \u0026lt;1 kΩ\u003cbr\u003eBooster: Input Impedance: 500 kΩ \/ Output Impedance: \u0026lt;1 kΩ\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFlexi-Switch Technology\u003c\/b\u003e\u003cbr\u003eThis device features Flexi-Switch Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching. Since the switching is relay based, it requires power to pass signal.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePower\u003c\/b\u003e\u003cbr\u003eThis device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. DO NOT RUN AT HIGHER VOLTAGES!\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":47531439030450,"sku":"ACEARLIFEV3SB","price":299.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/d0qgflhohvk1mwzsjgnd.jpg?v=1779959644"},{"product_id":"new-earthquaker-devices-park-fuzz-vintage-tone-guitar-effects-pedal-1","title":"New Earthquaker Devices Park Fuzz Vintage Tone Guitar Effects Pedal","description":"\u003cp\u003e\u003cb\u003eIncludes a new Fender Custom Shop Yellow Tweed 6-inch patch cable and a new Fender Custom Shop Yellow Tweed 10-foot instrument cable.\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Park Amplification company, originally started by Jim Marshall himself, has almost as much history as the actual Marshall name. As the story goes, Jim Marshall entered a distribution deal for his amp line in 1965, but the terms of the deal were vague enough such that Marshall could build amps on the side, just not under his own name. Thus, Park was born, and the amps produced under that name were slight variations on Marshall circuits until the company dissolved in 1982.\u003c\/p\u003e\u003cp\u003eAmong the line of amps, a few pedals were also produced. Most of them were wahs or variations thereof, but one pedal stuck out: The Park Fuzz Sound.\u003c\/p\u003e\u003cp\u003eThe original pedal featured unlabeled TO-1 package transistors, so one would think that the circuit left us with Jim Marshall. The good folks at EarthQuaker Devices, in collaboration with the newly-resurrected Park Amplification, have faithfully recreated the Park Fuzz Sound so that a new generation may enjoy it.\u003c\/p\u003e\u003cp\u003eWhile the original deployed the aforementioned mystery cans, the new Park Fuzz Sound uses a different set of NOS germanium transistors, hand-selected for a tonal match. When A\/B'd with the original unit, the sounds were strikingly similar. The reissue has way more range in the Fuzz dial than the original.\u003c\/p\u003e\u003cp\u003eAnother bugaboo of original fuzz pedals is the powering situation; in the case of the original Park, it's powered by a battery only. Many older fuzz pedals are positive-ground, which means the pedal cannot be daisy-chained. The new Park Fuzz Sound offers a chip inside that corrects the voltage problem for complete rig integration.\u003c\/p\u003e\u003cp\u003eThe new Park Fuzz Sound is hand-made, one at a time in exotic Akron, Ohio. The pedal is wired for true bypass and accepts a standard 9v center-negative Boss-style power adapter. The current draw is low, so it's ready for your isolated power supplies.\u003c\/p\u003e\u003cp\u003eMeasures: 4 5\/8\" x 2 1\/2\" x 2.25\" with knobs\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePower (not included)\u003c\/b\u003e\u003cbr\u003eThis device can be powered by a standard 9 volt DC power supply intended for musical instruments with a negative center 2.1mm barrel or a 9v battery. Even though this pedal is a germanium fuzz, it will play nice on a daisy chain due to its internal voltage regulation.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eControls\u003c\/b\u003e\u003cbr\u003eVolume: This is the level control, louder to the right, quieter to the left.\u003cbr\u003eTreble\/Bass: This is the tone control, thicker tones to the right, brighter to the left.\u003cbr\u003eFuzz: This is the gain control, more fuzz to the right, less to the left.\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":47531439554738,"sku":"ACEARPARKFUZZF0","price":187.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/idg70l84rvfjrv9j7ci5.png?v=1779959653"},{"product_id":"new-earthquaker-devices-scrolls-bass-odyssey-preamp-guitar-effects-pedal","title":"New Earthquaker Devices Scrolls Bass Odyssey Preamp Guitar Effects Pedal","description":"\u003cp\u003eFrom EarthQuaker Devices:\u003c\/p\u003e\u003cp\u003e\u003cb\u003eA collaboration between EarthQuaker Devices and Kentaro Nakao.\u003c\/b\u003e\u003cbr\u003eScrolls Bass Odyssey is a sonic pilgrimage through the entire universe of electric bass tone. From Motown to Metal and everywhere between and beyond. With a tube amp-like drive channel, an active EQ channel with three push-button switches for one-click tone sculpting, buffered parallel out, onboard effects loop, and balanced XLR out featuring just a splash of analog filtering to emulate a speaker cabinet, Scrolls is a powerful, modern tool that's compact and versatile enough to be the only thing you need to play a session or show other than a bass.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eEQ Channel\u003c\/b\u003e\u003cbr\u003eThe left side of Scrolls features a full suite of active EQ controls including audiophile-quality Bass, Middle, and Treble controls. The secret weapon of Scrolls' EQ section is the Variable Frequency control with the ability to cut\/boost frequencies from around 20 Hz to 10 kHz, making it the perfect tool for cutting out the mud and boosting the high-end. Within the EQ section, you'll find three push button switches that serve as potent assets for one-click tone sculpting.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eDrive Channel\u003c\/b\u003e\u003cbr\u003eOn the right side of Scrolls, you'll find the Drive channel featuring a versatile, tube amp-like distortion. Key amongst the Drive section features are the Blend knob, which enables you to adjust the amount of clean signal present in the overdriven signal, and the Bandwidth knob, which determines where the clipping is most prevalent (lower frequencies counterclockwise and higher frequencies clockwise). Together, the Blend and Bandwidth knobs can be adjusted to ensure the low-end response remains wide, deep, and full when using the Drive section.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eThe Brains of Your Signal Chain\u003c\/b\u003e\u003cbr\u003eScrolls features three outputs that all work simultaneously: a buffered parallel out for sending clean signal to an external destination like an amp, tuner, DI, or other effects; a balanced XLR out to run Scrolls directly to front of house or into a recording interface; and a standard 1\/4\" output. Scrolls also features an effects loop that lives between the Drive and EQ channels. This enables you to place modulation, time-based, or any other effects you'd normally place after dirt pedals after the Drive channel, while still retaining all the tone-shaping capabilities of the EQ channel.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eDesign Notes\u003c\/b\u003e\u003cbr\u003eThe Scrolls Bass Odyssey was born from a partnership with Japanese bassist and longtime EarthQuaker Devices friend Kentaro Nakao (Number Girl, Crypt City). His vision was to consolidate vintage and modern bass tones into a single, highly portable unit. The EQ channel is designed to be completely transparent when the knobs are set to noon, ensuring the bass retains its inherent tone. Three push buttons offer quick tone sculpting: Deep boosts 80 Hz for booming lows, Process scoops mids for a punchy modern tone, and Bright activates a 5 kHz boost for attack. Inspired by a rare overdrive in Kentaro's collection, the Drive channel delivers versatile, tube amp-like distortion with precise low-end command. Scrolls includes an effects loop right between the Drive and EQ channels, a buffered parallel out, and a balanced XLR out featuring a 100% analog speaker cabinet simulation.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eControls\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eEQ Controls\u003c\/b\u003e\u003cbr\u003eLevel: Output volume control when the EQ controls are active. Set the knob at noon for unity.\u003cbr\u003eVari: Boosts or cuts the Variable Frequency control. Position at noon for unity.\u003cbr\u003eVari-Freq: Variable frequency control for fine-tuning your tone. Adjustable from approximately 20 Hz to 10 kHz.\u003cbr\u003eTreble: Center position is flat; above boosts treble, below cuts treble.\u003cbr\u003eBass: Center position is flat; above boosts bass, below cuts bass.\u003cbr\u003eMiddle: Center position is flat; above boosts middle, below cuts middle.\u003cbr\u003eDeep: 80 Hz Boost.\u003cbr\u003eProcess: Low-mid scoop for a more modern sound.\u003cbr\u003eBright: 5 kHz Boost\u003cbr\u003eEQ Footswitch: Activates the EQ channel\u003c\/p\u003e\u003cp\u003e\u003cb\u003eDrive Controls\u003c\/b\u003e\u003cbr\u003eLevel: Output volume control for the Drive channel.\u003cbr\u003eBlend: Blends your clean signal with the Drive signal. Turn fully clockwise for maximum crunchiness.\u003cbr\u003eDrive: Controls the intensity of the overdrive.\u003cbr\u003eBandwidth: Determines where the clipping is most active. Counterclockwise for low-end clipping (warmer, softer), clockwise for high-end clipping (present, focused crunch with tighter low-end).\u003cbr\u003eTone: Low pass filter to shape the frequency of the Drive channel.\u003cbr\u003eDrive Footswitch: Activates the Drive channel\u003c\/p\u003e\u003cp\u003e\u003cb\u003eOutputs\u003c\/b\u003e\u003cbr\u003eParallel Out: Buffered output carrying your always-active clean signal.\u003cbr\u003eDirect Out: Balanced XLR out with subtle analog filtering to simulate a bass speaker cabinet.\u003cbr\u003eGround Lift: Press for ground lift on the XLR output.\u003cbr\u003eEffects Loop: Situated between the Drive and EQ stages; hard-wired and always active.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eTech Specs\u003c\/b\u003e\u003cbr\u003eDimensions: 4.75 x 4.50 x 2.25 in. (121 × 114 × 57 mm) with knobs\u003cbr\u003eCurrent Draw: 70 mA\u003cbr\u003eEQ Input Impedance: 10 MΩ \/ EQ Output Impedance: \u0026lt;1 kΩ\u003cbr\u003eDrive Input Impedance: 500 kΩ \/ Drive Output Impedance: 100 Ω\u003cbr\u003eParallel Input Impedance: 10 MΩ \/ Parallel Output Impedance: 100 Ω\u003cbr\u003eDirect Output Impedance: 100 Ω\u003c\/p\u003e\u003cp\u003eSwitching: Scrolls uses relay-based true bypass switching. The EQ side uses standard on\/off switching, the Drive side uses Flexi-Switch Technology.\u003c\/p\u003e\u003cp\u003ePower: This device takes a standard 9-volt DC power supply with a 2.1 mm negative center barrel (power supply not included). We always recommend pedal-specific, transformer-isolated wall-wart power supplies. DO NOT RUN AT HIGHER VOLTAGES!\u003c\/p\u003e\u003cp\u003eArtwork by Geoffrey Crowe\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":47531439587506,"sku":"ACEARSCROLLS","price":349.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/452de96f-d494-4039-b5d6-3836f29b70a6.jpg?v=1779959668"},{"product_id":"new-earthquaker-devices-the-warden-v2-optical-compressor-guitar-effects-pedal","title":"New EarthQuaker Devices The Warden V2 Optical Compressor Guitar Effects Pedal","description":"\u003cp\u003eFrom EarthQuaker Devices:\u003c\/p\u003e\u003cp\u003eThe Warden is an optical compressor with a feature set usually reserved for studio grade units. Built with high grade components and internally powered by 18v, The Warden has loads of gain and sustain on tap. With complete control over attack, release, sustain and ratio, The Warden will allow everything from a heavy squash with fast attack and release to \"barely there\" subtle compression. Optical compression has a reputation for having more character than a VCA or FET-based compression and The Warden is no exception.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eControls:\u003c\/b\u003e\u003cbr\u003e1. Tone: This pedal was designed to slightly color your tone, and the coloration can be dialed-in to your taste. Counterclockwise is treble cut, clockwise is treble boost. The tone is nearly flat around 11 o'clock.\u003cbr\u003e2. Attack: Controls how quickly the compressor reacts and starts leveling the signal. All the way counterclockwise is a fast, nearly immediate reaction. Turning the attack clockwise slows the reaction time.\u003cbr\u003e3. Release: Controls how long it takes the signal to raise back up to the level determined by the Sustain and Ratio settings. All the way counterclockwise is a fast release; the release time slows as you turn it clockwise.\u003cbr\u003e4. Level: Controls the overall output and is affected by the Sustain and Ratio settings. There is no specific unity setting; adjust to taste when you find your perfect compression setting.\u003cbr\u003e5. Ratio: Determines how much the gain reduction affects the signal. All the way up is full compression; the compression is reduced as you turn this counterclockwise, which allows more of the boosted, less-compressed signal to come through.\u003cbr\u003e6. Sustain: This is the heart of The Warden. It controls how hot the signal is, which changes the dynamics of the compression. The Warden is a feedback-style compressor; the hotter the signal, the more active the compression.\u003c\/p\u003e\u003cp\u003eDimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs\u003cbr\u003eCurrent Draw: 31 mA\u003cbr\u003eInput Impedance: 1 MΩ\u003cbr\u003eOutput Impedance: \u0026lt;1 kΩ\u003c\/p\u003e\u003cp\u003e\u003cb\u003eSwitching\u003c\/b\u003e\u003cbr\u003eThis device is true bypass and uses electronic relay-based switching. Audio will not pass without power.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePower\u003c\/b\u003e\u003cbr\u003eThis device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel (not included). We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. DO NOT RUN AT HIGHER VOLTAGES!\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":47531440373938,"sku":"ACEARWARDENV2","price":199.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/hbud1tillsi0fx8gfhmv.jpg?v=1779959681"},{"product_id":"new-earthquaker-devices-white-light-v2-legacy-reissue-overdrive-guitar-pedal","title":"New Earthquaker Devices White Light V2 Legacy Reissue Overdrive Guitar Pedal","description":"\u003cp\u003eFrom Earthquaker:\u003c\/p\u003e\u003cp\u003eLimited to 2,000 units worldwide. The White Light is a hard clipping, vintage-voiced overdrive that takes its cues from the vintage dirt pedals that defined the sounds of heavy rock. Think OD250 or Distortion+ without being overly derivative, a new voice to an olde sound if you will. The White Light gives you total control over the feel and voice of the dirt along with a modern presence that is highly responsive to your playing. We think you'll find that it is much more dynamic, open and harmonically rich than these classic overdrives it shares its lineage with. This classic EQD overdrive has been updated with a new enclosure, top-mounted jacks and Flexi-Switch Technology.\u003c\/p\u003e\u003cp\u003eGain: Controls the amount of distortion.\u003c\/p\u003e\u003cp\u003eWeight: A multi-functional control, allows the level of saturation, low end response and the overall feel of the device to be altered.\u003c\/p\u003e\u003cp\u003eLevel: Controls the output.\u003c\/p\u003e\u003cp\u003eCompression Switch:\u003cbr\u003eMinus (-): open with more high-mids and bite.\u003cbr\u003ePlus (+): crunchy and compressed with a bit less bite and a flatter mid response.\u003c\/p\u003e\u003cp\u003eDimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs\u003c\/p\u003e\u003cp\u003ePower: This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel.\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":47531455479986,"sku":"ACEARWHITELIGHTV2","price":159.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/dh3w1zlbsgffs45qjr5s.jpg?v=1779960048"},{"product_id":"new-earthquaker-devices-zoar-dynamic-audio-grinder-distortion-guitar-pedal","title":"New Earthquaker Devices Zoar Dynamic Audio Grinder Distortion Guitar Pedal","description":"\u003cp\u003eFrom Earthquaker:\u003c\/p\u003e\u003cp\u003eZoar is a medium-high gain discrete distortion (using only transistors; no opamps or diodes in here!) that has that touch sensitive amp-like quality to it that everyone craves. It has been finely tuned to create a highly tweakable hi-fi and modern sounding distortion, but with the ghosts of old school circuitry to deliver a grind that is both instantly familiar and delightfully unique. Want that defined sparkle and tightness of an overdrive? This has it. Want that low-medium gain fuzz that's perfect for drop tuned guitars and basses? This has it. Want to be able to dial in and control every nuance of your tone from jangly on-the-verge of break up to blowing the walls out heavy saturation? Then this is the pedal for you.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCustomize Your Sound\u003c\/strong\u003e\u003cbr\u003eThis meticulously crafted box has six knobs that allow you to truly customize your sound with the Level, Weight, Gain, Bass, Middle, and Treble controls. The red LED light indicates when the distortion is activated by the Flexi-Switch enabled footswitch.\u003c\/p\u003e\u003cp\u003eThe Gain control on Zoar goes from the edge of break up all the way over the cliff into the crunchy, grinding abyss. The character of the distortion is heavily dependent on the setting of the Weight control as well as your guitar's pickup type, and it is further fine-tuned by the EQ section.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTouch-Sensitive Controls\u003c\/strong\u003e\u003cbr\u003eWhile having its roots in a very familiar past, the passive 3-band EQ has been finely tuned for modern tones. While this style of tone shaping seems simple on the surface, it is deceptively complex and highly interactive.\u003c\/p\u003e\u003cp\u003eThe 3-band EQ and Gain controls give you nearly unlimited options with great focus and sensitive precision, but the real powerhouse of Zoar is the Weight control. This control dictates the amount of low end that is passed into the circuit, thus controlling the entire character of the pedal. From a mere clean boost to a high gain distortion to overdrive to the crispy Hi-Fi fuzz territory, this function gives you everything.\u003c\/p\u003e\u003cp\u003eThe Level control hits unity gain around noon, but this is dependent on where the other controls are set. In addition to controlling the output volume, it also plays a small part in the controlling the voice of Zoar.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRunning Zoar at 18v\u003c\/strong\u003e\u003cbr\u003eWant to elevate your sonic spirit to a higher level? Try running Zoar at higher voltage! Zoar can handle power up to 18v DC. Higher voltages will yield a different frequency response with more defined dynamics and a faster response.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eControls\u003c\/strong\u003e\u003cbr\u003eLevel: Adjusts the output volume.\u003cbr\u003eWeight: An input frequency control that changes the voice and saturation of the distortion.\u003cbr\u003eGain: Turn clockwise to increase distortion.\u003cbr\u003eBass: Passive bass control, 0–800Hz +\/- 15dB.\u003cbr\u003eMiddle: Passive middle control, 500Hz–3kHz +\/- 10dB.\u003cbr\u003eTreble: Passive treble control, 1kHz–10kHz +\/-15dB.\u003c\/p\u003e\u003cp\u003eDimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs\u003cbr\u003eCurrent Draw: 10 mA\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFlexi-Switch Technology\u003c\/strong\u003e\u003cbr\u003eThis relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003cbr\u003eThis device takes a 9-18 volt DC power supply with a standard 2.1mm negative center barrel plug. DO NOT POWER THE ZOAR HIGHER THAN 18V!\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":47531456266418,"sku":"ACEARZOAR","price":149.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/nlfdnfr4ek7ord5uhlz4.jpg?v=1779960063"},{"product_id":"new-earthquaker-devices-buffer-preamp-guitar-pedal","title":"New EarthQuaker Devices Buffer Preamp Guitar Pedal","description":"\u003cp\u003eFrom EarthQuaker Devices:\u003c\/p\u003e\u003cp\u003eA buffer is an important tool to combat tone loss with long cable runs or in signal chains running lots of true bypass pedals. With its high 1 Mohm input impedance and low 100 ohm output impedance, the EarthQuaker Devices Buffer\/Preamp will restore your tonal integrity and give you back the clear and dynamic signal you deserve and your amp craves. Want more? Not only will it restore high end loss, this device has a little trick up its sleeve that will also give your low end a subtle, yet powerful, little kick for some added dimension.\u003c\/p\u003e\u003cp\u003eDimensions: 3.6875 x 1.8125 x 1.8125 in. (94 x 46 x 46 mm)\u003cbr\u003eCurrent Draw: 15 mA\u003cbr\u003eInput Impedance: 1 MΩ\u003cbr\u003eOutput Impedance: 100 Ω\u003c\/p\u003e\u003cp\u003ePower: This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel (not included). We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":47531462459570,"sku":"ACEARBUFFERPRE","price":79.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/qvgnaeaui2nxptwtnfog.jpg?v=1779960257"},{"product_id":"new-earthquaker-devices-silos-multi-generational-time-reflection-delay-pedal","title":"New Earthquaker Devices Silos Multi-Generational Time Reflection Delay Pedal","description":"\u003cp\u003eFrom EarthQuaker Devices:\u003c\/p\u003e\u003cp\u003eUnlike anything before it, the Silos merges together a digital, analog, and tape delay into one compact and powerful pedal. In addition to the tri-voice delay, it features tap tempo, user-assignable expression control, and the ability to save and recall six presets, making it endlessly customizable and easy to operate. It's like having three classic pedals all rolled into one! Now you can save room on your pedalboard while never having to decide which single delay to use again.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e3 Modes Of Impeccable Sounding Delay\u003c\/strong\u003e\u003cbr\u003eEach of the three modes offers up to one second of delay time. From noon and back is 500 milliseconds to zero, which has its own character. From 500 milliseconds to one second of delay time, it's an entirely different beast. Dial them in for shorter delay times where they really excel and add loads of atmosphere and vibes. Push them further for rhythmic delays that are perfect for strumming and adding extra ambiance for your riffs.\u003c\/p\u003e\u003cp\u003eMode D: Digital Delay — bright repeats that remain strong as they decay. Shorter settings give you a bold stuttering staccato sound, while longer settings give you ambiance with longer repeats.\u003cbr\u003eMode A: Analog Delay — very mid-focused with faster diminishing repeats and dark and murky build ups. Works equally well with a clean signal or distortion.\u003cbr\u003eMode T: Tape Delay — reminiscent of a well-loved tape delay with just a hint of oil can delay vibes mixed in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGlobal Features\u003c\/strong\u003e\u003cbr\u003ePairs perfectly with distortion. Six available preset slots to save and recall your favorite settings. Easily switch between Live and Preset operating modes on the fly. User-assignable expression control over Time, Repeats or Mix.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eControls\u003c\/strong\u003e\u003cbr\u003eMode Toggle: Toggles between Digital Delay, Analog Delay, and Tape Delay.\u003cbr\u003eTime: Sets the delay time from 0–1 second.\u003cbr\u003eRepeats: Controls the regeneration of the delay signal. Does not self-oscillate in Digital Mode but begins to self-oscillate at 3 o'clock in Analog and Tape Modes.\u003cbr\u003eMix: Adjusts the level of the delay signal.\u003cbr\u003ePreset: Six available preset slots to save and recall your favorite settings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eDimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs\u003cbr\u003eCurrent Draw: 75 mA\u003cbr\u003eInput Impedance: 500 kΩ\u003cbr\u003eOutput Impedance: 100 Ω\u003c\/p\u003e\u003cp\u003eTRS expression pedal wiring — Tip: Wiper, Ring: +3.3V, Sleeve: Ground.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFlexi-Switch Technology\u003c\/strong\u003e\u003cbr\u003eThis relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching. Tap once to activate and again to bypass for latching operation; hold the footswitch for momentary operation. Silos is buffered bypass with tails. Power is required to pass signal.\u003c\/p\u003e\u003cp\u003ePower: This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel (not included). We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. DO NOT RUN AT HIGHER VOLTAGES!\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":47531462492338,"sku":"ACEARSILOS","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/rkv5bzftcilswxhl8ive.jpg?v=1779960271"},{"product_id":"new-earthquaker-devices-chelsea-low-end-fuzz-driver-guitar-effects-pedal","title":"New Earthquaker Devices Chelsea Low End Fuzz Driver Guitar Effects Pedal","description":"\u003cp\u003eFrom EarthQuaker Devices:\u003c\/p\u003e\u003cp\u003eWith only three controls, this deceptively powerful pedal offers you everything from light overdrive to full on distortion with clarity and blissful grinding. A Tone On\/Off switch allows you remove the Tone control from the circuit, opening up a whole new world of midrange grind. Switch it off for a simplified and straightforward attack or leave it on for a full-bodied distortion with loads of low-end with a slight natural scoop. Roll up the Sustain for wall-shaking bass notes or sustaining lead and adjust the Tone for a wild and wide frequency response from aggressive top end to low-end rumble.\u003c\/p\u003e\u003cp\u003eNamed after the guitar shop in which it was purchased back in 1989, the Chelsea recreates the sound of the one-of-a-kind fuzz pedal that found a forever home with LCD Soundsystem and was used on several of their recordings. We were tasked with replicating the exact sound of this pedal in a reliable format that can withstand the stresses of the modern world. Each Chelsea is handmade at EarthQuaker Devices headquarters in always sunny Akron, Ohio, USA by a bunch of pretty nice humans and one big robot.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eControls\u003c\/strong\u003e\u003cbr\u003eSustain: Adjusts the amount of distortion and sustain.\u003cbr\u003eTone: Use this to fine tune the frequency response. Boost treble by turning clockwise, boost bass and tame the top end by turning counterclockwise.\u003cbr\u003eTone On\/Off: Bypasses the tone control and delivers a more mid focused response.\u003cbr\u003eLevel: Controls the output volume.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eDimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs\u003cbr\u003eCurrent Draw: 10 mA\u003cbr\u003eInput Impedance: 50 kΩ\u003cbr\u003eOutput Impedance: \u0026lt;10 kΩ\u003cbr\u003eSwitching: relay-based true bypass switching; requires power to pass signal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003cbr\u003eThis device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel (not included). We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. DO NOT RUN AT HIGHER VOLTAGES!\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":47531462525106,"sku":"ACEARCHELSEA","price":179.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/nqp9srad4wdl65y0eg5n.jpg?v=1779960285"},{"product_id":"new-earthquaker-towers-soundscape-generator-stereo-reverberant-filter-pedal","title":"New Earthquaker Towers Soundscape Generator Stereo Reverberant Filter Pedal","description":"\u003cp\u003eFrom EarthQuaker Devices:\u003c\/p\u003e\u003cp\u003eTowers teleports your sound into a vast stereophonic expanse, weaving it into its unique resonant filtered feedback networks. Reflections hang in the air and move in and out of a sprawling multidimensional soundscape, where they don't just fade away—they radiate, breathe and drift endlessly into the void.\u003c\/p\u003e\u003cp\u003eThe filter frequency offers three distinct modes of navigation: Manual Mode puts the player in charge of the filter frequencies; Envelope Mode lets playing dynamics breathe and morph into ever-changing filter movements; and LFO Mode surrenders control to a slow-moving oscillator that sweeps across the stereo field.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThree Distinct Modes of Operation\u003c\/strong\u003e\u003cbr\u003eManual Mode: The filter frequency is manually changed by adjusting the Frequency control, with the left channel opposite the right.\u003cbr\u003eEnvelope Mode: The filter frequency is changed with an envelope controlled by picking dynamics; the Frequency control adjusts envelope sensitivity.\u003cbr\u003eLFO Mode: The filter frequency is controlled by a slow moving LFO and the Frequency control adjusts the rate, sweeping across the stereo field for a slow panning filter effect.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDesign Notes\u003c\/strong\u003e\u003cbr\u003eYour input signal is fed into an array of infinitely repeating micro-echoes, creating dynamic generative impulses which feed an immense cathedral-style reverb where the Length control shapes the decay time and density of reflections. This is interwoven with a resonant low-pass filter that intersects the delay and reverb pathways at multiple points, crafting a massive, unearthly sound. Eight user-assignable presets capture and recall your favorite settings.\u003c\/p\u003e\u003cp\u003eTowers can be pulled across space and time with Stretch, which doubles the length of the reverb by slowing the processor speed, generating a lo-fi effect that pulls apart the delay lines while smearing the filter and lowering the frequency response. Tap the Stretch footswitch for an instantaneous effect or hold it as the entire system descends into the abyss.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eControls\u003c\/strong\u003e\u003cbr\u003eMode: 3-position toggle switch that changes the mode of operation.\u003cbr\u003eLength: Controls the length of the reverb and adjusts the speed of the Stretch feature.\u003cbr\u003eMix: Sets the overall level of the effect.\u003cbr\u003eStretch Footswitch: Slows down the entire digital system, doubling reverb length with a pitch-bending effect.\u003cbr\u003eFrequency: Controls the filter frequency with different functions depending on mode.\u003cbr\u003eFilter: Controls how much the resonant low pass filter is mixed into the reverb pathways.\u003cbr\u003ePreset: Selects which user preset to use in preset mode.\u003cbr\u003eActivate Footswitch: Turns the effect on and off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003cbr\u003eDimensions: 4.75 x 4.25 x 2.50 in. (121 x 108 x 64 mm) with knobs\u003cbr\u003eCurrent Draw: 85 mA\u003cbr\u003eInput Impedance: 500 kΩ\u003cbr\u003eOutput Impedance: 100 Ω\u003cbr\u003eEXP Jack: Tip= Wiper (CV), Ring= 3.3V, Sleeve= Ground\u003c\/p\u003e\u003cp\u003eTails or Full Bypass Switching: Towers can operate in Tails or Full Bypass. It ships in Tails Mode (Green Activate LED), allowing the reverb to naturally decay after bypass; Full Bypass cuts the reverb completely (Red Activate LED).\u003c\/p\u003e\u003cp\u003ePower: This device takes a standard 9-volt DC power supply with a 2.1 mm negative center barrel (not included). We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. DO NOT RUN AT HIGHER VOLTAGES!\u003c\/p\u003e\u003cp\u003eArtwork by Dave Neeson.\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":47531465310386,"sku":"ACEARTOWERS","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/3cb465ab-ccb0-405a-8f2b-dd01230eebed.jpg?v=1779960308"},{"product_id":"new-earthquaker-devices-sunn-o-life-pedal-v3-distortion-guitar-effects-pedal","title":"New Earthquaker Devices Sunn O))) Life Pedal V3 Distortion Guitar Effects Pedal","description":"\u003cp\u003eFrom EarthQuaker Devices:\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOctave Distortion + Booster\u003c\/strong\u003e\u003cbr\u003eSunn O))) and EarthQuaker Devices are pleased to bring you the Sunn O))) Life Pedal V3. The Life Pedal circuit has been meticulously tweaked from the original to squeeze every last drop of heavy crushing tone available. The octave section has been fine-tuned to make it more pronounced without losing the bottom end, and a third footswitch (utilizing Flexi-Switch Technology) for the octave allows an additional method of quick and radical tone shaping.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat Is It?\u003c\/strong\u003e\u003cbr\u003eSunn O))) Life Pedal is a distortion with a blendable analog octave up and a booster combined in one compact package. The \"Amplitude\" side is faithfully modeled after the classic \"White Face\" distortion unit, using modern, reliable components. The clipping section adds two options to the original: no diodes for full, grinding OpAmp assault; two silicon diodes and one LED in an asymmetrical configuration for a smooth, compressed crunch; and the stock double silicon diode configuration for that classic tone.\u003c\/p\u003e\u003cp\u003eThe Octave is an all-discrete, analog full-wave rectifier based on a classic vintage design. Located at the input, the Octave control slowly blends in the octave effect as you turn it clockwise, and can also be used via expression control for hands-free octave swells. The octave is monophonic and works best playing single notes above the twelfth fret using the neck pickup. The \"Magnitude\" section is a simple all-discrete MOSFET booster designed to blast your preamp tubes — a 100% clean, high impedance booster that adds very little color while pushing your amp into saturation. The signal path goes Octave \u0026gt; Distortion \u0026gt; Boost.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eControls\u003c\/strong\u003e\u003cbr\u003eOctave: Blends in the analog octave as you turn it clockwise.\u003cbr\u003eDistortion: Turn clockwise for more distortion (about +60dB of gain).\u003cbr\u003eFilter: A low pass filter with a frequency response from around 500Hz to 30kHz. Counterclockwise for more high-end, clockwise for less.\u003cbr\u003eAmplitude: Output volume for the octave distortion side.\u003cbr\u003eClipping Switch: OpAmp (no diodes), Asymm (two silicon diodes and one LED) or Symm (stock double silicon diode).\u003cbr\u003eMagnitude: Output volume for the booster. Unity is around noon.\u003cbr\u003eAmplitude \/ Magnitude \/ Octave Footswitches: Distortion, Boost and Octave activators. The octave only works when the distortion (Amplitude) is active.\u003cbr\u003eOctave EXP: Connect any expression pedal to control the analog octave blend.\u003c\/p\u003e\u003cp\u003eDimensions: 4.75 x 5.65 x 2.25 in. (121 x 144 x 57 mm) with knobs\u003cbr\u003eCurrent Draw: 15 mA\u003cbr\u003eOctave Distortion: Input Impedance 1 MΩ \/ Output Impedance \u0026lt;1 kΩ\u003cbr\u003eBooster: Input Impedance 500 kΩ \/ Output Impedance \u0026lt;1 kΩ\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFlexi-Switch Technology\u003c\/strong\u003e\u003cbr\u003eThis relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching. Tap the footswitch once to activate and again to bypass; hold for momentary operation. Since the switching is relay based, it requires power to pass signal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003cbr\u003eThis device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. DO NOT RUN AT HIGHER VOLTAGES!\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":47531467079858,"sku":"ACEARLIFEV3","price":299.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/i4isj0ssddo0hoa2ghcy.jpg?v=1779960358"}],"url":"https:\/\/www.citymusicannex.com\/collections\/earthquaker-devices.oembed","provider":"City Music Annex","version":"1.0","type":"link"}