{"title":"Darkglass","description":null,"products":[{"product_id":"used-darkglass-microtubes-b7k-ultra-v2-w-aux-in-analog-bass-preamp-pedal","title":"Used Darkglass Microtubes B7K ULTRA V2 w\/Aux-In Analog Bass Preamp Pedal","description":"\u003cp\u003eMint, all original packaging, as new\u003c\/p\u003e\n\u003cp\u003eThe upgraded Microtubes B7K Ultra features all the versatility and sonic possibilities of the first version plus: (1) Single user loadable cabinet simulation impulse response. (2) Micro-USB B port to connect to PC\/Mac to load a different Virtual Cabinet through the Darkglass Suite. (3) 3.5mm headphone output with cabinet simulation. (4) Balanced XLR output with switchable cabinet simulation.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eFEATURES:\u003cbr\u003e\u003cbr\u003eMaster:\u003c\/p\u003e\n\u003cp\u003eWhereas the Level Knob controls the output of the overdrive section the Master volume adjusts the overall volume of the unit. Ideal for fine tuning the output on clean mode. It also serves as a DI level control.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eBlend:\u003c\/p\u003e\n\u003cp\u003eMixes the clean input signal with the overdriven signal. The clean signal remains at unity gain while the volume of the overdriven signal is set by the Level knob, allowing for fine control of the blend ratio.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eLevel:\u003c\/p\u003e\n\u003cp\u003eSets the volume of the overdriven signal.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eDrive:\u003c\/p\u003e\n\u003cp\u003eSets the amount of saturation in the overdriven signal.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eAttack Switch:\u003c\/p\u003e\n\u003cp\u003eSets the amount of treble content to saturate: The \"Boost\" setting emphasizes the treble content extra clarity and presence. The \"Flat\" position leaves this register untouched while the \"Cut\" position will reduce the amount of high frequencies being saturated.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eGrunt Switch:\u003c\/p\u003e\n\u003cp\u003eSets the amount of low frequency content to saturate by selecting between three different bass boost levels before the clipping stage.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eBass:\u003c\/p\u003e\n\u003cp\u003e+-12dB @ 100Hz\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eLo Mids:\u003c\/p\u003e\n\u003cp\u003e+-12dB switchable 250Hz, 500Hz and 1kHz\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eHi Mids:\u003c\/p\u003e\n\u003cp\u003e+-12dB switchable 750Hz, 1.5KHz and 3kHz\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eTreble:\u003c\/p\u003e\n\u003cp\u003e+-12dB @ 5kHz\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eDirect Output:\u003cbr\u003e\u003cbr\u003eBalanced XLR output for connecting the pedal to a microphone preamp, PA system etc.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eGround Lift:\u003c\/p\u003e\n\u003cp\u003eDisconnects the signal ground on the Direct Output to break any ground loops. Set this switch to either position that has less noise. The switch does not affect the ¼” output.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eCab Sim:\u003c\/p\u003e\n\u003cp\u003eToggle the cabinet simulation on\/off on the Direct Output. This switch completely bypasses all digital circuits and allows you to get a zero latency signal when needed.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eHeadphones:\u003c\/p\u003e\n\u003cp\u003eB7K Ultra has an internal stereo headphone amplifier capable of driving a minimum load of 16 ohms from the 3.5mm stereo jack. Use the Master volume control to adjust the level.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eUSB:\u003c\/p\u003e\n\u003cp\u003eA Micro USB B connector allows you to connect the pedal to PC\/Mac to load cabinet simulation impulse responses to the pedal and control various other settings.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eAux In:\u003c\/p\u003e\n\u003cp\u003eThis 3.5mm stereo input allows you to practice with backing tracks from e.g. your smartphone or laptop. Auxiliary input can only be used with the headphone output. The pedal does not control the level, it must be set from your audio source. Remember to always first set the level low before connecting anything to the aux in!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eDIMENSIONS:\u003c\/p\u003e\n\u003cp\u003e125x96x57 mm (4,92x3,77x2,24 in)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eWARNING:\u003c\/p\u003e\n\u003cp\u003eWARNING: When the pedal is on bypass the master volume does not affect the headphone volume. In this case the total volume is adjustable in Darkglass Suite. With sensitive headphones the bypass volume can be very loud if not adjusted.\u003c\/p\u003e\n\u003cp\u003eThe Microtubes B7K Ultra v2 has a current draw of 110mA. Only use a regulated 9V DC adapter with a center-negative plug. Due to ecological reasons, it does not accept batteries. Unregulated power supplies and\/or higher voltages may result in suboptimal noise performance and even damage your unit.\u003c\/p\u003e","brand":"Darkglass","offers":[{"title":"Default Title","offer_id":41137178968242,"sku":"ACDARMTB7KULT2AUS","price":449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/products\/1_63d20670-3455-4f47-8900-16b3c29742ff.png?v=1633949030"},{"product_id":"new-darkglass-alpha-omega-ultra-dual-bass-preamp-od-pedal-w-aux","title":"New Darkglass Alpha Omega Ultra V2 w\/ Aux-In Dual Bass Preamp Overdrive Pedal","description":"\u003cp\u003e\u003cstrong\u003eIncludes two patch cables\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Alpha Omega Ultra is the most versatile bass preamplifier we've designed: With its two distinct distortion circuits (Alpha and Omega), extremely high dynamic range, six-band active graphic EQ, dedicated headphone output and balanced direct output with switchable digital impulse-response cabinet emulation make for an incredibly complete tool for the modern bass player. Now, thanks to its \u003cstrong\u003e1\/8-inch Aux input\u003c\/strong\u003e, this is the perfect solution for practicing along with guide tracks from your mobile device or computer.\u003c\/p\u003e\n\u003cp\u003eFEATURES:\u003c\/p\u003e\n\u003cp\u003eBlend: Mixes the clean and processed signals. The clean signal remains at unity gain while the volume of the overdriven signal is set by the Level knob, allowing for fine mix tuning.\u003c\/p\u003e\n\u003cp\u003eLevel: Sets the volume of the overdriven signal.\u003c\/p\u003e\n\u003cp\u003eDrive: Sets the amount of gain in the overdriven signal.\u003c\/p\u003e\n\u003cp\u003eBite: Boosts High Mids (2.8kHz) for additional presence and definition.\u003c\/p\u003e\n\u003cp\u003eGrowl: Shelving Bass Boost for a fatter tone and increased low end saturation.\u003c\/p\u003e\n\u003cp\u003eMod: Selects or mixes between the two distinct distortion circuits: Alpha is punchy, tight with a lot of definition, whereas Omega is simply brutal and raw. On the Darkglass Suite you can assign footswitch control of the Mod to toggle between Alpha and Omega.\u003c\/p\u003e\n\u003cp\u003eMaster: Whereas the Level knob controls the output of the overdrive section the Master volume adjusts the overall volume of the unit. Ideal for fine tuning the output on clean mode. It also serves as a DI and headphone volume control. Please note that volume is not affected by this control when the pedal is on bypass.\u003c\/p\u003e\n\u003cp\u003eBass: Low shelf +-12dB @ 80 Hz\u003c\/p\u003e\n\u003cp\u003eMid bands: +-10dB @ 250 Hz, 500 Hz, 1.5 kHz, 3 kHz\u003c\/p\u003e\n\u003cp\u003eTreble: High shelf +-12dB @ 5 kHz\u003c\/p\u003e\n\u003cp\u003eGround Lift: Disconnects the signal ground on the Direct Output to break any ground loops. Set this switch to either position that has less noise. The switch does not affect the 1\/4\" output.\u003c\/p\u003e\n\u003cp\u003eCab Sim: Toggle the cabinet simulation on\/off on the Direct Output. This switch completely bypasses all digital circuits and allows you to get a zero latency signal when needed.\u003c\/p\u003e\n\u003cp\u003eHeadphones: Alpha-Omega Ultra has an internal stereo headphone amplifier capable of driving a minimum load of 16 ohms from the 3.5mm stereo jack. Use the Master volume control to adjust the level.\u003c\/p\u003e\n\u003cp\u003eUSB: A Micro USB B connector allows you to connect the pedal to PC\/Mac to load cabinet simulation impulse responses to the pedal and control various other settings.\u003c\/p\u003e\n\u003cp\u003eDIMENSIONS: 125x96x57 mm (4.92x3.77x2.24 in)\u003c\/p\u003e\n\u003cp\u003eWARNING: When the pedal is on bypass the master volume does not affect the headphone volume. In this case, the total volume is adjustable in Darkglass Suite. With sensitive headphones, the bypass volume can be very loud if not adjusted.\u003c\/p\u003e\n\u003cp\u003eThe Alpha-Omega Ultra has a current draw of 110mA. Only use a regulated 9V DC adapter with a center-negative plug. Due to ecological reasons, it does not accept batteries. Unregulated power supplies and\/or higher voltages may result in suboptimal noise performance and even damage your unit, voiding the warranty.\u003c\/p\u003e","brand":"Darkglass","offers":[{"title":"Default Title","offer_id":41375601066162,"sku":"ACDARAOUV2H2","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/AlphaOmegaUltraV2H2.jpg?v=1749074853"},{"product_id":"used-darkglass-microtubes-x-ultra-multiband-distortion-guitar-effects-pedal-1","title":"Used Darkglass Microtubes X Ultra Multiband Distortion","description":"\u003cp\u003eMint, all original packaging, as new\u003c\/p\u003e\n\u003cp\u003eThe Microtubes X Ultra greatly expands on the already immense versatility of the Microtubes X7. It features all the great controls of its predecessor, allowing users to select exactly what frequencies they want to compress and saturate for the low and treble respectively, but adds four major additions providing an additional layer of flexibility while maintaining the same compact footprint, making it an extremely complete tool for the modern bassist.\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLow Comp: Controls compression amount for the low band. Both threshold and makeup gain are controlled to maintain a constant level, and it also controls the compression amount when the compressor is enabled for clean signal in Darkglass Suite.\u003c\/li\u003e\n\u003cli\u003eLow Level: Sets the output volume of the low-pass signal.\u003c\/li\u003e\n\u003cli\u003eLow Pass Frequency: Controls the cut-off frequency to be mixed back to the high-pass side, ranging from 50Hz (sub-bass only) to 500Hz to preserve some clean mids.\u003c\/li\u003e\n\u003cli\u003eHigh Level: Sets the output volume of the distorted high-pass signal.\u003c\/li\u003e\n\u003cli\u003eHigh Drive: Sets the amount of distortion for the high-pass side.\u003c\/li\u003e\n\u003cli\u003eHigh Pass Frequency: Controls the cutoff frequency to be distorted, ranging from 100Hz (thicker, fuzzier saturation) to 1kHz for ultra-sharp definition.\u003c\/li\u003e\n\u003cli\u003eMaster: +\/-12 dB. Sets the overall volume of the unit.\u003c\/li\u003e\n\u003cli\u003eEQ: Low Shelf +\/-12 dB @ 80Hz; 250Hz \/ 500Hz \/ 1.5kHz \/ 3kHz +\/-12dB; High Shelf +\/-12 dB @ 5kHz.\u003c\/li\u003e\n\u003cli\u003eDirect Output: Balanced XLR output for connecting the pedal to a microphone preamp, PA system, etc.\u003c\/li\u003e\n\u003cli\u003eGround Lift: Disconnects the signal ground on the Direct Output to break ground loops. Does not affect the 1\/4\" output.\u003c\/li\u003e\n\u003cli\u003eCab Sim: Toggle the cabinet simulation on\/off on the Direct Output. Bypasses all digital circuits for a zero latency signal when needed.\u003c\/li\u003e\n\u003cli\u003eHeadphones: Digitally controlled headphone amplifier with a 3.5mm stereo jack output, controllable via Darkglass Suite or the master volume when the preamp is enabled.\u003c\/li\u003e\n\u003cli\u003eUSB: A Micro USB B connector lets you connect to PC\/Mac to load cabinet simulation impulse responses and configure settings via the free Darkglass Suite software.\u003c\/li\u003e\n\u003cli\u003eAuxiliary Input: Connect your PC or mobile device to play along with songs and backing tracks while using the headphone output.\u003c\/li\u003e\n\u003cli\u003eDimensions: 125 x 96 x 57 mm (4.92 x 3.77 x 2.24 in).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Microtubes X Ultra has a current draw of 200mA. Only use a regulated 9V DC adapter with a center-negative plug. Due to ecological reasons, it does not accept batteries. Unregulated power supplies and\/or higher voltages may result in suboptimal noise performance and even damage your unit.\u003c\/p\u003e","brand":"Darkglass","offers":[{"title":"Default Title","offer_id":41137477845170,"sku":"ACDARMXUUS","price":439.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/products\/57_6fcbe93d-dcbe-4833-8b27-321ddcd22ef8.png?v=1633951844"},{"product_id":"used-darkglass-alpha-omega-ultra-dual-bass-preamp-od-pedal-w-aux","title":"Used Darkglass Alpha Omega Ultra V2 w\/ Aux-In Dual Bass Preamp Overdrive Pedal","description":"\u003cp\u003eMint, all original packaging, as new\u003c\/p\u003e\n\u003cp\u003eThe Alpha Omega Ultra is the most versatile bass preamplifier we've designed: With its two distinct distortion circuits (Alpha and Omega), extremely high dynamic range, six-band active graphic EQ, dedicated headphone output and balanced direct output with switchable digital impulse-response cabinet emulation make for an incredibly complete tool for the modern bass player. Now, thanks to its \u003cstrong\u003e1\/8-inch Aux input\u003c\/strong\u003e, this is the perfect solution for practicing along with guide tracks from your mobile device or computer.\u003c\/p\u003e\n\u003cp\u003eFEATURES:\u003c\/p\u003e\n\u003cp\u003eBlend: Mixes the clean and processed signals. The clean signal remains at unity gain while the volume of the overdriven signal is set by the Level knob, allowing for fine mix tuning.\u003c\/p\u003e\n\u003cp\u003eLevel: Sets the volume of the overdriven signal.\u003c\/p\u003e\n\u003cp\u003eDrive: Sets the amount of gain in the overdriven signal.\u003c\/p\u003e\n\u003cp\u003eBite: Boosts High Mids (2.8kHz) for additional presence and definition.\u003c\/p\u003e\n\u003cp\u003eGrowl: Shelving Bass Boost for a fatter tone and increased low end saturation.\u003c\/p\u003e\n\u003cp\u003eMod: Selects or mixes between the two distinct distortion circuits: Alpha is punchy, tight with a lot of definition, whereas Omega is simply brutal and raw. On the Darkglass Suite you can assign footswitch control of the Mod to toggle between Alpha and Omega.\u003c\/p\u003e\n\u003cp\u003eMaster: Whereas the Level knob controls the output of the overdrive section, the Master volume adjusts the overall volume of the unit. Ideal for fine tuning the output on clean mode. It also serves as a DI and headphone volume control.\u003c\/p\u003e\n\u003cp\u003eBass: Low shelf +-12dB @ 80 Hz\u003c\/p\u003e\n\u003cp\u003eMid bands: +-10dB @ 250 Hz, 500 Hz, 1.5 kHz, 3 kHz\u003c\/p\u003e\n\u003cp\u003eTreble: High shelf +-12dB @ 5 kHz\u003c\/p\u003e\n\u003cp\u003eGround Lift: Disconnects the signal ground on the Direct Output to break any ground loops.\u003c\/p\u003e\n\u003cp\u003eCab Sim: Toggle the cabinet simulation on\/off on the Direct Output. This switch completely bypasses all digital circuits and allows you to get a zero latency signal when needed.\u003c\/p\u003e\n\u003cp\u003eHeadphones: Alpha·Omega Ultra has an internal stereo headphone amplifier capable of driving a minimum load of 16 ohms from the 3.5mm stereo jack.\u003c\/p\u003e\n\u003cp\u003eUSB: A Micro USB B connector allows you to connect the pedal to PC\/Mac to load cabinet simulation impulse responses to the pedal and control various other settings via Darkglass Suite.\u003c\/p\u003e\n\u003cp\u003eDIMENSIONS: 125x96x57 mm (4.92x3.77x2.24 in)\u003c\/p\u003e\n\u003cp\u003eWARNING: The Alpha·Omega Ultra has a current draw of 110mA. Only use a regulated 9V DC adapter with a center-negative plug. Due to ecological reasons, it does not accept batteries.\u003c\/p\u003e","brand":"Darkglass","offers":[{"title":"Default Title","offer_id":41137537646770,"sku":"ACDARAOUV2US","price":449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/AlphaOmegaUltraV2.jpg?v=1749075094"},{"product_id":"new-darkglass-microtubes-x-ultra-multiband-distortion-guitar-effects-pedal","title":"New Darkglass Microtubes X Ultra Multiband Distortion Guitar Effects Pedal","description":"\u003cp\u003eWith your purchase you will receive two Hosa metal patch cables (IRG-100.5).\u003c\/p\u003e\n\u003cp\u003eThe Microtubes X Ultra greatly expands on the already immense versatility of the Microtubes X7. Featuring all the great controls that its predecessor has that allows users to select exactly what frequencies they want to compress and saturate for the low and treble respectively, but with four major additions providing an additional layer of flexibility, while maintaining the same compact footprint, making it an extremely complete tool for the modern bassist.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eFEATURES:\u003c\/p\u003e\n\u003cp\u003eLow Comp:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eControls compression amount for the low band. Both threshold and makeup gain are controlled to maintain a constant level. This control is also used to control the compression amount when the compressor is enabled for clean signal in Darkglass Suite.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eLow Level:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eSets the output volume of the low-pass signal.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eLow Pass Frequency:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eControls the cut-off frequency to be mixed back to the high-pass side. Ranging from 50Hz (for only sub-bass) and 500Hz to preserve some clean mids.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eHigh Level:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eSets the output volume of the distorted high-pass signal.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eHigh Drive:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eSets the amount of distortion for the high pass side.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eHigh Pass Frequency:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eControls the cutoff frequency to be distorted, ranging from 100Hz (for thicker, fuzzier saturation) or 1kHz for ultra-sharp definition.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eMaster:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e+-12 dB. Sets the overall volume of the unit.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eLow Shelf:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e+-12 dB @ 80 Hz.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e250 Hz \/ 500 Hz \/ 1,5 kHz \/ 3 kHz:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e+-12dB.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eHigh Shelf:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e+-12 dB @ 5 kHz.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eDirect Output:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eBalanced XLR output for connecting the pedal to a microphone preamp, PA system, etc.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eGround Lift:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eDisconnects the signal ground on the Direct Output to break any ground loops. Set this switch to either position that has less noise. The switch does not affect the ¼” output.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eCab Sim:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eToggle the cabinet simulation on\/off on the Direct Output. This switch completely bypasses all digital circuits and allows you to get a zero latency signal when needed.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eHeadphones:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMicrotubes X Ultra has a digitally controlled headphone amplifier with a 3.5mm stereo jack output. Digital volume control is available in Darkglass Suite. Headphone volume can be controlled directly on the pedal with the master volume control when the preamp is enabled. When the pedal is on bypass, the master volume does not affect the headphone volume.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eUSB:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eA Micro USB B connector allows you to connect the pedal to PC\/Mac to load cabinet simulation impulse responses to the pedal and control various other settings. Download the free Darkglass Suite software from www.darkglass.com\/suite to configure the pedal, load new impulses and download firmware updates.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eAuxiliary Input:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003ePerfect for quiet practice, you can now connect your PC or mobile device to your pedal to play along with your favorite songs, and backing tracks while using the headphone output.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eDIMENSIONS:\u003c\/p\u003e\n\u003cp\u003e125x96x57 mm (4.92x3.77x2.24 in)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eWARNING:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eWARNING: When the pedal is on bypass the master volume does not affect the headphone volume. In this case, the total volume is adjustable in Darkglass Suite. With sensitive headphones, the bypass volume can be very loud if not adjusted.\u003c\/p\u003e\n\u003cp\u003eThe Microtubes X Ultra has a current draw of 200mA. Only use a regulated 9V DC adapter with a center-negative plug. Due to ecological reasons, it does not accept batteries. Unregulated power supplies and\/or higher voltages may result in suboptimal noise performance and even damage your unit, voiding the warranty.\u003c\/p\u003e","brand":"Darkglass","offers":[{"title":"Default Title","offer_id":41137665933490,"sku":"ACDARMXUH2","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/MicrotubesXUltraH2.jpg?v=1749076056"},{"product_id":"new-darkglass-electronics-luminal-booster-ultra-preamp-bass-guitar-effects-pedal","title":"New Darkglass Electronics Luminal Booster Ultra Preamp Bass Guitar Effects Pedal","description":"\u003cp\u003eThis item is new, in box! An authorized-dealer store receipt is included with your purchase.\u003c\/p\u003e\u003cp\u003eFrom Darkglass:\u003cbr\u003e\u003cbr\u003eCombining the rich tone of the Harmonic Booster with the precision of an adjustable frequency range parallel compression, this pedal gives you unmatched control. With a 6-band EQ, gain reduction meter, and the option to load 7 custom Impulse Responses via USB, it delivers ultimate tonal flexibility for bass players of any genre. Pure, powerful, and precise—your clean tone, perfected.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFront Features\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFilter\u003c\/strong\u003e\u003cbr\u003eAdjustable lowpass filter for the compressed signal (150 Hz to 20 kHz)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBlend\u003c\/strong\u003e\u003cbr\u003eBlends between clean and compressed signal\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eComp\u003c\/strong\u003e\u003cbr\u003eAdjusts the amount of compression applied\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLevel\u003c\/strong\u003e\u003cbr\u003eAdjusts the level of the compressor after the blend control\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBoost\u003c\/strong\u003e\u003cbr\u003e+-20dB boost or cut\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCharacter\u003c\/strong\u003e\u003cbr\u003eAllows blending in the perfect amount of the tone-shaping circuitry. Press to select between 7 IRs.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMid gain\u003c\/strong\u003e\u003cbr\u003e+-20dB @ the frequency selected by \"Mid Frequency\".\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMid Frequency\u003c\/strong\u003e\u003cbr\u003eMid frequency from 250Hz to 2.5kHz.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMaster\u003c\/strong\u003e\u003cbr\u003e+-12 dB. Sets the overall volume of the unit.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBass\u003c\/strong\u003e\u003cbr\u003eLow shelf +-13dB @ 80 Hz\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMid bands\u003c\/strong\u003e\u003cbr\u003e+-13dB @ 250 Hz, 500 Hz, 1.5 kHz, 3 kHz\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTreble\u003c\/strong\u003e\u003cbr\u003eHigh shelf +-13dB @ 5 kHz\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003cbr\u003eWidth: 125 mm \/ 5\"\u003cbr\u003eLength: 96 mm \/ 3¾\"\u003cbr\u003eHeight: 57 mm \/ 2¼\"\u003cbr\u003eWeight: 430 g \/ 0.95 lb\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWarning\u003c\/strong\u003e\u003cbr\u003eWhen the pedal is on bypass the master volume does not affect the headphone volume. In this case the total volume is adjustable in Darkglass Suite. With sensitive headphones, the bypass volume can be very loud if not adjusted.\u003cbr\u003e\u003cbr\u003eThe Luminal Booster Ultra has a current draw of 400mA. Only use a regulated 9V DC adapter with a center-negative plug (not included). Unregulated power supplies and\/or higher voltages may result in suboptimal noise performance and even damage your unit, voiding the warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLuminal Booster Ultra Modes\u003c\/strong\u003e\u003cbr\u003eThe Luminal Booster Ultra offers an extra layer of versatility, allowing the user to change the order of the Compression and Harmonic Booster engines by long-pressing the left footswitch; you can enable either the blue or red mode.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDarkglass Suite\u003c\/strong\u003e\u003cbr\u003eUtilizing the desktop version of the Darkglass Suite allows you to load one of the available impulse responses from our library or add your custom \/ third party impulses to use with your pedal. In addition you can control the headphones level output.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInput \u0026amp; Outputs\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInput\u003c\/strong\u003e\u003cbr\u003eConnect your instrument or output from your pedal board to the ¼\" mono jack.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAux In\u003c\/strong\u003e\u003cbr\u003eThis 3.5mm stereo input allows you to practice with backing tracks from e.g. your smartphone or laptop. Auxiliary input can only be used with the headphone output. The pedal does not control the level, it must be set from your audio source. Remember to always first set the level low before connecting anything to the aux in!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHeadphone Output\u003c\/strong\u003e\u003cbr\u003eLuminal Booster Ultra has an internal stereo headphone amplifier capable of driving a minimum load of 16 ohms from the 3.5mm stereo jack. Use the Master volume control to adjust the level.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e9V DC\u003c\/strong\u003e\u003cbr\u003eOnly use a regulated 9V DC adapter with a center-negative plug.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eOutput\u003c\/strong\u003e\u003cbr\u003eConnect from the ¼\" Output jack to the input of your amplifier or another effects pedal.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDirect Output\u003c\/strong\u003e\u003cbr\u003eBalanced XLR output for connecting the pedal to a microphone preamp, PA system etc.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eGround lift\u003c\/strong\u003e\u003cbr\u003eDisconnects the signal ground on the Direct Output to break any ground loops. Set this switch to either position that has less noise. The switch does not affect the ¼\" output.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCab Sim\u003c\/strong\u003e\u003cbr\u003eSelect between 7 Cab Sim slots for the XLR, accessed by pushing on the Character knob.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSB\u003c\/strong\u003e\u003cbr\u003eA USB C connector allows you to connect the pedal to PC\/Mac to load cabinet simulation impulse responses to the pedal and control various other settings.\u003c\/p\u003e","brand":"Darkglass Electronics","offers":[{"title":"Default Title","offer_id":47531393220786,"sku":"ACDARLBU","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/gkuy45led9ozlujhyehy.jpg?v=1779958370"},{"product_id":"new-darkglass-electronics-kaamos-distortion-octaver-bass-guitar-effects-pedal","title":"New Darkglass Electronics Kaamos Distortion \u0026 Octaver Bass Guitar Effects Pedal","description":"\u003cp\u003eFrom Darkglass:\u003cbr\u003eDesigned in collaboration with legendary bassist and producer Amos Heller, Kaamos blends a powerful distortion with octave-down tones.\u003cbr\u003e\u003cbr\u003eReal-time routing controls let you shape your signal path with ease—stack effects in series for rich saturation or run them in parallel for intricate, layered textures. A movable effects loop, configurable in three distinct positions, opens up new possibilities, while a dedicated sub-octave output unlocks creative multi-amp setups. Every detail is precision-engineered to put you in complete control of your sound.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFront Features\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBlend\u003c\/strong\u003e\u003cbr\u003eAdjusts the drive blend. Press to select the loop position.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTone\u003c\/strong\u003e\u003cbr\u003eAdjusts the drive tone. Press to select between processed signal and clean DI for the XLR out.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDrive\u003c\/strong\u003e\u003cbr\u003eAdjusts the amount of distortion in the drive circuit.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDrive mod\u003c\/strong\u003e\u003cbr\u003eAdjusts the blend between two distinct drive circuits (α and Ω).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDrive level\u003c\/strong\u003e\u003cbr\u003eAdjusts the level of the drive circuit before the blend.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eOctave filter\u003c\/strong\u003e\u003cbr\u003eAdjusts the lowpass filter frequency of the low octave. Press to select the type of octaver.\u003cbr\u003e1. Sublime (monophonic mute-type)\u003cbr\u003e2. Sublemon (monophonic flip-type)\u003cbr\u003e3. Subcitri (polyphonic)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eOctave level\u003c\/strong\u003e\u003cbr\u003eAdjusts the low octave signal amount in the octaver circuit. Press to select between parallel or series effect positioning.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eClean level\u003c\/strong\u003e\u003cbr\u003eAdjusts the clean signal amount in the octaver circuit.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003cbr\u003eWidth: 125 mm \/ 5\"  Length: 96 mm \/ 3¾\"\u003cbr\u003eHeight: 57 mm \/ 2¼\"\u003cbr\u003eWeight: 450 g \/ 0.99 lb\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWarning\u003c\/strong\u003e\u003cbr\u003eKaamos has a current draw of 400mA. Only use a regulated 9V DC adapter with a center-negative plug (not included). Unregulated power supplies and\/or higher voltages may result in suboptimal noise performance and even damage your unit, voiding the warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eModes\u003c\/strong\u003e\u003cbr\u003eThe octaver and distortion effect blocks can be configured to be either in series or in parallel by pressing the [octave level] knob. The LEDs above the knob will indicate which mode is selected.\u003cbr\u003e\u003cbr\u003eThe position of the effects loop can be configured to three different positions in the signal chain:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eafter the octaver\u003c\/li\u003e\n\u003cli\u003eafter the distortion\u003c\/li\u003e\n\u003cli\u003ein parallel with the signal chain\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe position is selected by pressing the Blend knob and the LEDs above the knob indicate the selected position.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIn the 1. position the loop is active when the octaver is active.\u003c\/li\u003e\n\u003cli\u003eIn the 2. position the loop is active when the distortion is active.\u003c\/li\u003e\n\u003cli\u003eIn the 3. position the loop is active when either one or both of the octaver and distortion are active.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe effects loop automatically detects if nothing is plugged in and removes itself from the signal chain.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInputs \u0026amp; Outputs\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInput\u003c\/strong\u003e\u003cbr\u003eConnect your instrument or output from your pedal board to the ¼\" mono jack.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e9V DC\u003c\/strong\u003e\u003cbr\u003eOnly use a regulated 9V DC adapter with a center-negative plug.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSub\u003c\/strong\u003e\u003cbr\u003eThis ¼\" Sub output jack provides only the low octave signal when the octaver is activated.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eOutput\u003c\/strong\u003e\u003cbr\u003eConnect from the ¼\" Output jack to the input of your amplifier or another effects pedal.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSend\u003c\/strong\u003e\u003cbr\u003eUse this ¼\" to send the effects loop signal to your external effects.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eReturn\u003c\/strong\u003e\u003cbr\u003eConnect the output of the last pedal in you effects loop into this ¼\" jack.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDirect output\u003c\/strong\u003e\u003cbr\u003eBalanced XLR output for connecting the pedal to a microphone preamp, PA system etc.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eGround lift\u003c\/strong\u003e\u003cbr\u003eDisconnects the signal ground on the Direct Output to break any ground loops. Set this switch to either position that has less noise. The switch does not affect the ¼\" output.\u003c\/p\u003e","brand":"Darkglass Electronics","offers":[{"title":"Default Title","offer_id":47531393253554,"sku":"ACDARKAAMOS","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/indrdxjjk2hc3bghgesu.jpg?v=1779958376"},{"product_id":"used-darkglass-electronics-kaamos-distortion-octaver-bass-guitar-effects-pedal-в™","title":"Used Darkglass Electronics Kaamos Distortion \u0026 Octaver Bass Guitar Effects Pedal","description":"\u003cp\u003eMint, all original packaging, as new\u003c\/p\u003e\u003cp\u003eFrom Darkglass:\u003cbr\u003eDesigned in collaboration with legendary bassist and producer Amos Heller, Kaamos blends a powerful distortion with octave-down tones.\u003cbr\u003e\u003cbr\u003eReal-time routing controls let you shape your signal path with ease—stack effects in series for rich saturation or run them in parallel for intricate, layered textures. A movable effects loop, configurable in three distinct positions, opens up new possibilities, while a dedicated sub-octave output unlocks creative multi-amp setups. Every detail is precision-engineered to put you in complete control of your sound.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFront Features\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBlend\u003c\/strong\u003e\u003cbr\u003eAdjusts the drive blend. Press to select the loop position.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTone\u003c\/strong\u003e\u003cbr\u003eAdjusts the drive tone. Press to select between processed signal and clean DI for the XLR out.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDrive\u003c\/strong\u003e\u003cbr\u003eAdjusts the amount of distortion in the drive circuit.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDrive mod\u003c\/strong\u003e\u003cbr\u003eAdjusts the blend between two distinct drive circuits (α and Ω).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDrive level\u003c\/strong\u003e\u003cbr\u003eAdjusts the level of the drive circuit before the blend.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eOctave filter\u003c\/strong\u003e\u003cbr\u003eAdjusts the lowpass filter frequency of the low octave. Press to select the type of octaver.\u003cbr\u003e1. Sublime (monophonic mute-type)\u003cbr\u003e2. Sublemon (monophonic flip-type)\u003cbr\u003e3. Subcitri (polyphonic)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eOctave level\u003c\/strong\u003e\u003cbr\u003eAdjusts the low octave signal amount in the octaver circuit. Press to select between parallel or series effect positioning.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eClean level\u003c\/strong\u003e\u003cbr\u003eAdjusts the clean signal amount in the octaver circuit.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003cbr\u003eWidth: 125 mm \/ 5\"  Length: 96 mm \/ 3¾\"\u003cbr\u003eHeight: 57 mm \/ 2¼\"\u003cbr\u003eWeight: 450 g \/ 0.99 lb\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWarning\u003c\/strong\u003e\u003cbr\u003eKaamos has a current draw of 400mA. Only use a regulated 9V DC adapter with a center-negative plug (not included). Unregulated power supplies and\/or higher voltages may result in suboptimal noise performance and even damage your unit, voiding the warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eModes\u003c\/strong\u003e\u003cbr\u003eThe octaver and distortion effect blocks can be configured to be either in series or in parallel by pressing the [octave level] knob. The LEDs above the knob will indicate which mode is selected.\u003cbr\u003e\u003cbr\u003eThe position of the effects loop can be configured to three different positions in the signal chain:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eafter the octaver\u003c\/li\u003e\n\u003cli\u003eafter the distortion\u003c\/li\u003e\n\u003cli\u003ein parallel with the signal chain\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe position is selected by pressing the Blend knob and the LEDs above the knob indicate the selected position.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIn the 1. position the loop is active when the octaver is active.\u003c\/li\u003e\n\u003cli\u003eIn the 2. position the loop is active when the distortion is active.\u003c\/li\u003e\n\u003cli\u003eIn the 3. position the loop is active when either one or both of the octaver and distortion are active.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe effects loop automatically detects if nothing is plugged in and removes itself from the signal chain.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInputs \u0026amp; Outputs\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInput\u003c\/strong\u003e\u003cbr\u003eConnect your instrument or output from your pedal board to the ¼\" mono jack.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e9V DC\u003c\/strong\u003e\u003cbr\u003eOnly use a regulated 9V DC adapter with a center-negative plug.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSub\u003c\/strong\u003e\u003cbr\u003eThis ¼\" Sub output jack provides only the low octave signal when the octaver is activated.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eOutput\u003c\/strong\u003e\u003cbr\u003eConnect from the ¼\" Output jack to the input of your amplifier or another effects pedal.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSend\u003c\/strong\u003e\u003cbr\u003eUse this ¼\" to send the effects loop signal to your external effects.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eReturn\u003c\/strong\u003e\u003cbr\u003eConnect the output of the last pedal in you effects loop into this ¼\" jack.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDirect output\u003c\/strong\u003e\u003cbr\u003eBalanced XLR output for connecting the pedal to a microphone preamp, PA system etc.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eGround lift\u003c\/strong\u003e\u003cbr\u003eDisconnects the signal ground on the Direct Output to break any ground loops. Set this switch to either position that has less noise. The switch does not affect the ¼\" output.\u003c\/p\u003e","brand":"Darkglass Electronics","offers":[{"title":"Default Title","offer_id":47531393777842,"sku":"ACDARKAAMOSUS","price":389.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/vi6fiwgulodltbadifb0.jpg?v=1779958391"},{"product_id":"new-darkglass-alpha-omega-photon-bass-distortion-compression-guitar-pedal","title":"New Darkglass Alpha Omega Photon Bass Distortion Compression Guitar Pedal","description":"\u003cp\u003e\u003cstrong\u003eIncludes two patch cables and one guitar cable\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWith your purchase you will receive two Hosa metal patch cables (IRG-100.5) and a Hosa 10 foot Pro guitar cable!\u003c\/p\u003e\u003cp\u003eFrom Darkglass:\u003cbr\u003e\u003cbr\u003eA new era for musical credos has set more elevated standards.\u003cbr\u003e\u003cbr\u003eVersatility, empowerment, limitless options, and ever-demanding tools at the disposal of every musician and composer are today on demand. A call for inventive devices continues to make musicians more inspired, clever and connected.\u003cbr\u003e\u003cbr\u003eDarkglass took the Alpha·Omega, and with relentless efforts added all the learned engineering to it. Placing the iconic distortion circuit into a new paradigm enables a range of possibilities that were never before available.\u003cbr\u003e\u003cbr\u003eA comprehensive design allows programming each part of the pedal, from compression, distortion, and cabinet simulation in the signal chain to presets via MIDI and the Darkglass Suite.\u003cbr\u003e\u003cbr\u003eThe Alpha·Omega now has its ultimate interface. Fully programmable, empowered, and never before this versatile.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eUnique distortion engine which blends aggressive distortion with multi-band compression for a thick and powerful bass tone\u003cbr\u003e\u003cbr\u003eCompression and distortion can be bypassed independently, and both have 5 selectable modes\u003cbr\u003e\u003cbr\u003eSelectable cabinet simulation with 5 onboard IRs. Can be used with the headphone output, XLR DI output, or stereo line outputs\u003cbr\u003e\u003cbr\u003e6-band graphic EQ with the same touch sensitive sliders found on the Element\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDid You Know?\u003c\/strong\u003e\u003cbr\u003eThe signature Alpha-Omega sound uses two distinct distortion circuits (Alpha and Omega) which can be blended or used independantly\u003cbr\u003e\u003cbr\u003eMIDI over 1\/8\" jack has become common with guitar pedals, and allows players to have complete control over all parameters a pedal offers\u003cbr\u003e\u003cbr\u003eThe footswitches double as rotary potentiometers, allowing you to select between the distortion modes, compression modes, and cab sim IRs\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eConnectivity\u003c\/strong\u003e:\u003cbr\u003eMono instrument input (1\/4\")\u003cbr\u003eAux input (1\/8\" stereo)\u003cbr\u003eL and R audio outputs (2 x 1\/4\")\u003cbr\u003eXLR DI output\u003cbr\u003eHeadphone output (1\/8\" stereo)\u003cbr\u003eUSB-C (Audio interface and Darkglass Suite)\u003cbr\u003eMIDI input (1\/8\" TRS)\u003cbr\u003eBluetooth (audio in and Darkglass Suite)\u003cbr\u003eAdvanced Alpha-Omega distortion and compression pedal\u003cbr\u003eMIDI input to externally control parameters\u003cbr\u003e6-band graphic EQ\u003cbr\u003e5 compressor modes\u003cbr\u003e5 distortion modes\u003cbr\u003e5 cab sim IRs\u003cbr\u003eAux input and headphone output\u003cbr\u003eAudio interface capability over USB-C\u003c\/p\u003e","brand":"Darkglass Electronics","offers":[{"title":"Default Title","offer_id":47531394924722,"sku":"ACDARAOPHH0","price":649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/tmdnsfmrjvr5zzrfaah0.jpg?v=1779958405"},{"product_id":"used-darkglass-alpha-omega-photon-bass-distortion-compression-guitar-pedal","title":"Used Darkglass Alpha Omega Photon Bass Distortion Compression Guitar Pedal","description":"\u003cp\u003eMint, all original packaging, as new\u003c\/p\u003e\u003cp\u003eA new era for musical credos has set more elevated standards.\u003cbr\u003e\u003cbr\u003eVersatility, empowerment, limitless options, and ever-demanding tools at the disposal of every musician and composer are today on demand. A call for inventive devices continues to make musicians more inspired, clever and connected.\u003cbr\u003e\u003cbr\u003eDarkglass took the Alpha·Omega, and with relentless efforts added all the learned engineering to it. Placing the iconic distortion circuit into a new paradigm enables a range of possibilities that were never before available.\u003cbr\u003e\u003cbr\u003eA comprehensive design allows programming each part of the pedal, from compression, distortion, and cabinet simulation in the signal chain to presets via MIDI and the Darkglass Suite.\u003cbr\u003e\u003cbr\u003eThe Alpha·Omega now has its ultimate interface. Fully programmable, empowered, and never before this versatile.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eUnique distortion engine which blends aggressive distortion with multi-band compression for a thick and powerful bass tone\u003cbr\u003eCompression and distortion can be bypassed independently, and both have 5 selectable modes\u003cbr\u003eSelectable cabinet simulation with 5 onboard IRs. Can be used with the headphone output, XLR DI output, or stereo line outputs\u003cbr\u003e6-band graphic EQ with the same touch sensitive sliders found on the Element\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDid You Know?\u003c\/strong\u003e\u003cbr\u003eThe signature Alpha-Omega sound uses two distinct distortion circuits (Alpha and Omega) which can be blended or used independantly\u003cbr\u003eMIDI over 1\/8\" jack has become common with guitar pedals, and allows players to have complete control over all parameters a pedal offers\u003cbr\u003eThe footswitches double as rotary potentiometers, allowing you to select between the distortion modes, compression modes, and cab sim IRs\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eConnectivity\u003c\/strong\u003e:\u003cbr\u003eMono instrument input (1\/4\")\u003cbr\u003eAux input (1\/8\" stereo)\u003cbr\u003eL and R audio outputs (2 x 1\/4\")\u003cbr\u003eXLR DI output\u003cbr\u003eHeadphone output (1\/8\" stereo)\u003cbr\u003eUSB-C (Audio interface and Darkglass Suite)\u003cbr\u003eMIDI input (1\/8\" TRS)\u003cbr\u003eBluetooth (audio in and Darkglass Suite)\u003cbr\u003eAdvanced Alpha-Omega distortion and compression pedal\u003cbr\u003eMIDI input to externally control parameters\u003cbr\u003e6-band graphic EQ\u003cbr\u003e5 compressor modes\u003cbr\u003e5 distortion modes\u003cbr\u003e5 cab sim IRs\u003cbr\u003eAux input and headphone output\u003cbr\u003eAudio interface capability over USB-C\u003c\/p\u003e","brand":"Darkglass Electronics","offers":[{"title":"Default Title","offer_id":47531394990258,"sku":"ACDARAOPHUS","price":579.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/s3cwjxzcsazgk3fe9zxy.jpg?v=1779958417"},{"product_id":"new-darkglass-microtubes-b7k-ultra-v2-w-aux-in-analog-bass-guitar-preamp-pedal","title":"New Darkglass Microtubes B7K ULTRA V2 w\/ Aux-In Analog Bass Guitar Preamp Pedal","description":"\u003cp\u003e\u003cstrong\u003eIncludes two patch cables\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWith your purchase you will receive two Hosa metal patch cables (IRG-100.5).\u003c\/p\u003e\u003cp\u003eFrom Darkglass:\u003cbr\u003e\u003cbr\u003eThe upgraded Microtubes B7K Ultra features all the versatility and sonic possibilities of the first version plus: (1) Single user loadable cabinet simulation impulse response. (2) Micro-USB B port to connect to PC\/Mac to load a different Virtual Cabinet through the Darkglass Suite. (3) 3.5mm headphone output with cabinet simulation. (4) Balanced XLR output with switchable cabinet simulation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMaster\u003c\/strong\u003e\u003cbr\u003eWhereas the Level Knob controls the output of the overdrive section the Master volume adjusts the overall volume of the unit. Ideal for fine tuning the output on clean mode. It also serves as a DI level control.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBlend\u003c\/strong\u003e\u003cbr\u003eMixes the clean input signal with the overdriven signal. The clean signal remains at unity gain while the volume of the overdriven signal is set by the Level knob, allowing for fine control of the blend ratio.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLevel\u003c\/strong\u003e\u003cbr\u003eSets the volume of the overdriven signal.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDrive\u003c\/strong\u003e\u003cbr\u003eSets the amount of saturation in the overdriven signal.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAttack Switch\u003c\/strong\u003e\u003cbr\u003eSets the amount of treble content to saturate: The \"Boost\" setting emphasizes the treble content extra clarity and presence. The \"Flat\" position leaves this register untouched while the \"Cut\" position will reduce the amount of high frequencies being saturated.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eGrunt Switch\u003c\/strong\u003e\u003cbr\u003eSets the amount of low frequency content to saturate by selecting between three different bass boost levels before the clipping stage.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBass\u003c\/strong\u003e\u003cbr\u003e+-12dB @ 100Hz\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLo Mids\u003c\/strong\u003e\u003cbr\u003e+-12dB switchable 250Hz, 500Hz and 1kHz\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHi Mids\u003c\/strong\u003e\u003cbr\u003e+-12dB switchable 750Hz, 1.5KHz and 3kHz\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTreble\u003c\/strong\u003e\u003cbr\u003e+-12dB @ 5kHz\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDirect Output\u003c\/strong\u003e\u003cbr\u003eBalanced XLR output for connecting the pedal to a microphone preamp, PA system etc.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eGround lift\u003c\/strong\u003e\u003cbr\u003eDisconnects the signal ground on the Direct Output to break any ground loops. Set this switch to either position that has less noise. The switch does not affect the ¼\" output.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCab Sim\u003c\/strong\u003e\u003cbr\u003eToggle the cabinet simulation on\/off on the Direct Output. This switch completely bypasses all digital circuits and allows you to get a zero latency signal when needed.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHeadphones\u003c\/strong\u003e\u003cbr\u003eB7K Ultra has an internal stereo headphone amplifier capable of driving a minimum load of 16 ohms from the 3.5mm stereo jack. Use the Master volume control to adjust the level.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSB\u003c\/strong\u003e\u003cbr\u003eA Micro USB B connector allows you to connect the pedal to PC\/Mac to load cabinet simulation impulse responses to the pedal and control various other settings.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAux In\u003c\/strong\u003e\u003cbr\u003eThis 3.5mm stereo input allows you to practice with backing tracks from e.g. your smartphone or laptop. Auxiliary input can only be used with the headphone output. The pedal does not control the level, it must be set from your audio source. Remember to always first set the level low before connecting anything to the aux in!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003cbr\u003e125x96x57 mm (4.92x3.77x2.24 in)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWarning\u003c\/strong\u003e\u003cbr\u003eWhen the pedal is on bypass the master volume does not affect the headphone volume. In this case the total volume is adjustable in Darkglass Suite. With sensitive headphones the bypass volume can be very loud if not adjusted.\u003cbr\u003e\u003cbr\u003eThe Microtubes B7K Ultra v2 has a current draw of 110mA. Only use a regulated 9V DC adapter with a center-negative plug. Due to ecological reasons, it does not accept batteries. Unregulated power supplies and\/or higher voltages may result in suboptimal noise performance and even damage your unit, voiding the warranty.\u003c\/p\u003e","brand":"Darkglass Electronics","offers":[{"title":"Default Title","offer_id":47531395088562,"sku":"ACDARMTB7KULT2AH2","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/n5ipxzbzco3krnaioeva.jpg?v=1779958425"},{"product_id":"new-darkglass-microtubes-b1k-cmos-bass-overdrive-guitar-effects-pedal","title":"New Darkglass Microtubes B1K CMOS Bass Overdrive Guitar Effects Pedal","description":"\u003cp\u003e\u003cstrong\u003eIncludes two patch cables\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWith your purchase you will receive two Hosa metal patch cables (IRG-100.5).\u003c\/p\u003e\u003cp\u003eFrom Darkglass:\u003cbr\u003e\u003cbr\u003eThe Microtubes B1K is a phenomenal tribute to one of our most legendary distortion circuits in a compact and intuitive format. We are proud to introduce our Microtubes B1K distortion pedal, the first of its kind from an all-new lineup.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFront | Level\u003c\/strong\u003e\u003cbr\u003eSets the volume of the overdriven signal.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFront | Drive\u003c\/strong\u003e\u003cbr\u003eSets the amount of saturation in the overdriven signal.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBack | Blend\u003c\/strong\u003e\u003cbr\u003eMixes the clean input signal with the overdriven signal. The clean signal is fixed at unity gain, while the volume of the overdriven signal is set by the Level knob, allowing for fine control of the blend ratio. Turn clockwise to blend in the clean signal.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBack | Tone\u003c\/strong\u003e\u003cbr\u003eControls the high frequency content of the sound. A variable low pass filter from 3 kHz to 8 kHz. Turn CCW for a brighter sound.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBack | MBoost\u003c\/strong\u003e\u003cbr\u003eGives a subtle 6 dB boost from 300 Hz to 1 kHz to help you cut through the mix.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBack | Grunt\u003c\/strong\u003e\u003cbr\u003eProvides a low-end boost to massively thicken your sound when engaged.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003cbr\u003eWidth 50 mm (2 in) Height 100 mm (4 in) Depth 45 mm (1.75 in) Weight 205 g (0.45 lb)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWarning\u003c\/strong\u003e\u003cbr\u003eThe Microtubes B1K has a current draw of 30 mA. Only use a regulated 9V DC adapter with a center-negative plug. Due to ecological reasons, it does not accept batteries. Unregulated power supplies and\/or higher voltages may result in suboptimal noise performance and even damage your unit, voiding the warranty.\u003c\/p\u003e","brand":"Darkglass Electronics","offers":[{"title":"Default Title","offer_id":47531395121330,"sku":"ACDARB1KH2","price":229.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/wz6dgzp8d2hxjuruykl2.jpg?v=1779958434"},{"product_id":"used-darkglass-microtubes-b1k-cmos-bass-overdrive-guitar-effects-pedal","title":"Used Darkglass Microtubes B1K CMOS Bass Overdrive Guitar Effects Pedal","description":"\u003cp\u003eMint, all original packaging, as new\u003c\/p\u003e\u003cp\u003eFrom Darkglass:\u003c\/p\u003e\u003cp\u003eThe Microtubes B1K is a phenomenal tribute to one of our most legendary distortion circuits in a compact and intuitive format. We are proud to introduce our Microtubes B1K distortion pedal, the first of its kind from an all-new lineup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFront | Level\u003c\/strong\u003e\u003cbr\u003eSets the volume of the overdriven signal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFront | Drive\u003c\/strong\u003e\u003cbr\u003eSets the amount of saturation in the overdriven signal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBack | Blend\u003c\/strong\u003e\u003cbr\u003eMixes the clean input signal with the overdriven signal. The clean signal is fixed at unity gain, while the volume of the overdriven signal is set by the Level knob, allowing for fine control of the blend ratio. Turn clockwise to blend in the clean signal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBack | Tone\u003c\/strong\u003e\u003cbr\u003eControls the high frequency content of the sound. A variable low pass filter from 3 kHz to 8 kHz. Turn CCW for a brighter sound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBack | MBoost\u003c\/strong\u003e\u003cbr\u003eGives a subtle 6 dB boost from 300 Hz to 1 kHz to help you cut through the mix.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBack | Grunt\u003c\/strong\u003e\u003cbr\u003eProvides a low-end boost to massively thicken your sound when engaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003cbr\u003eWidth 50 mm (2 in) Height 100 mm (4 in) Depth 45 mm (1.75 in) Weight 205 g (0.45 lb)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarning\u003c\/strong\u003e\u003cbr\u003eThe Microtubes B1K has a current draw of 30 mA. Only use a regulated 9V DC adapter with a center-negative plug. Due to ecological reasons, it does not accept batteries. Unregulated power supplies and\/or higher voltages may result in suboptimal noise performance and even damage your unit.\u003c\/p\u003e","brand":"Darkglass Electronics","offers":[{"title":"Default Title","offer_id":47531395154098,"sku":"ACDARB1KUS","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/rnw38sf1raayrugwmmjf.jpg?v=1779958442"},{"product_id":"new-darkglass-dfz-duality-mini-dual-fuzz-engine-bass-guitar-effects-pedal","title":"New Darkglass DFZ Duality Mini Dual Fuzz Engine Bass Guitar Effects Pedal","description":"\u003cp\u003e\u003cstrong\u003eIncludes two patch cables\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWith your purchase you will receive two Hosa metal patch cables (IRG-100.5).\u003c\/p\u003e\u003cp\u003eFrom Darkglass:\u003c\/p\u003e\u003cp\u003eThe Duality is a unique fuzz pedal that contains two discrete fuzz circuits—a gated saw-tooth wave and a raunchy high-gain sound—which can be mixed together to yield a vast selection of distinct sonic textures.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFront features\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLevel\u003c\/strong\u003e\u003cbr\u003eSets the volume of the overdriven signal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDuality\u003c\/strong\u003e\u003cbr\u003eMixes two discrete fuzz circuits. Set it at minimum for a pure gated saw-tooth wave, or crank it up for a tighter high gain fuzz.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003cbr\u003eWidth: 50 mm \/ 2\"\u003cbr\u003eLength: 45 mm \/ 1.75\"\u003cbr\u003eHeight: 100 mm \/ 4\"\u003cbr\u003eWeight: 205 g \/ 0.45 lb\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarning\u003c\/strong\u003e\u003cbr\u003eThe Duality Fuzz has a current draw of 30 mA. Only use a regulated 9V DC adapter with a center-negative plug. Unregulated power supplies and\/or higher voltages may result in suboptimal noise performance and even damage your unit, voiding the warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBack features\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBlend\u003c\/strong\u003e\u003cbr\u003eMixes the clean input signal with the overdriven signal. The clean signal remains at unity gain while the volume of the overdriven signal is set by the Level knob, allowing for fine control of the blend ratio.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFilter\u003c\/strong\u003e\u003cbr\u003eControls the amount of high frequency content in the fuzz signal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eInput Impedance 1 MΩ\u003cbr\u003eOutput Impedance 100 kΩ\u003cbr\u003eCurrent Consumption ~40 mA\u003cbr\u003eVoltage 9V DC (Center Negative)\u003c\/p\u003e","brand":"Darkglass Electronics","offers":[{"title":"Default Title","offer_id":47531395252402,"sku":"ACDARDGDUALITYH2","price":229.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/qblbxde4ejhjo4t09nyh.jpg?v=1779958449"},{"product_id":"used-darkglass-dfz-duality-mini-dual-fuzz-engine-bass-guitar-effects-pedal","title":"Used Darkglass DFZ Duality Mini Dual Fuzz Engine Bass Guitar Effects Pedal","description":"\u003cp\u003eMint, all original packaging, as new\u003c\/p\u003e\u003cp\u003eFrom Darkglass:\u003c\/p\u003e\u003cp\u003eThe Duality is a unique fuzz pedal that contains two discrete fuzz circuits—a gated saw-tooth wave and a raunchy high-gain sound—which can be mixed together to yield a vast selection of distinct sonic textures.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFront features\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLevel\u003c\/strong\u003e\u003cbr\u003eSets the volume of the overdriven signal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDuality\u003c\/strong\u003e\u003cbr\u003eMixes two discrete fuzz circuits. Set it at minimum for a pure gated saw-tooth wave, or crank it up for a tighter high gain fuzz.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003cbr\u003eWidth: 50 mm \/ 2\"\u003cbr\u003eLength: 45 mm \/ 1.75\"\u003cbr\u003eHeight: 100 mm \/ 4\"\u003cbr\u003eWeight: 205 g \/ 0.45 lb\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarning\u003c\/strong\u003e\u003cbr\u003eThe Duality Fuzz has a current draw of 30 mA. Only use a regulated 9V DC adapter with a center-negative plug. Unregulated power supplies and\/or higher voltages may result in suboptimal noise performance and even damage your unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBack features\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBlend\u003c\/strong\u003e\u003cbr\u003eMixes the clean input signal with the overdriven signal. The clean signal remains at unity gain while the volume of the overdriven signal is set by the Level knob, allowing for fine control of the blend ratio.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFilter\u003c\/strong\u003e\u003cbr\u003eControls the amount of high frequency content in the fuzz signal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eInput Impedance 1 MΩ\u003cbr\u003eOutput Impedance 100 kΩ\u003cbr\u003eCurrent Consumption ~40 mA\u003cbr\u003eVoltage 9V DC (Center Negative)\u003c\/p\u003e","brand":"Darkglass Electronics","offers":[{"title":"Default Title","offer_id":47531396071602,"sku":"ACDARDGDUALITYUS","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/j1y1dwibjahlrszncxqp.jpg?v=1779958456"},{"product_id":"new-darkglass-electronics-anagram-multi-effects-bass-guitar-pedal","title":"New Darkglass Electronics Anagram Multi Effects Bass Guitar Pedal","description":"\u003cp\u003eFrom Darkglass:\u003cbr\u003e\u003cbr\u003eThe future of bass, reimagined\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRewriting the boundaries of bass.\u003c\/strong\u003e\u003cbr\u003eAnagram rethinks the way you shape your tone. With ultra-low latency, extensive customization, and seamless integration into the Darkglass ecosystem, it supports both studio precision and stage performance. Built for ease of use, Anagram not only refines your tone but also unlocks new possibilities for your creativity.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMulti-effect platform optimized for bass players.\u003c\/li\u003e\n\u003cli\u003eSix-core DSP architecture for complex effect chains with low latency.\u003c\/li\u003e\n\u003cli\u003eReal-time audio processing managed by a dedicated operating system.\u003c\/li\u003e\n\u003cli\u003eCurated DSP blocks and effects specifically for bass.\u003c\/li\u003e\n\u003cli\u003eSupport for standard-size NAM and AIDA-X neural models and IRs.\u003c\/li\u003e\n\u003cli\u003eUpgradeable architecture for future DSP blocks, and third-party content.\u003c\/li\u003e\n\u003cli\u003eAdd up to 24 simultaneous effects blocks for complex, parallel signal chains.\u003c\/li\u003e\n\u003cli\u003e7-inch high-brightness touchscreen for clear and intuitive control.\u003c\/li\u003e\n\u003cli\u003eThree footswitches for live performance control.\u003c\/li\u003e\n\u003cli\u003eSix high-resolution endless rotary knobs for precise parameter adjustments.\u003c\/li\u003e\n\u003cli\u003eFlexible input and output configuration.\u003c\/li\u003e\n\u003cli\u003eSuited for both live and studio environments.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThe sound you imagine.\u003c\/strong\u003e\u003cbr\u003eAnagram's multicore DSP engine and modern OS work together to handle real-time audio and host a hand-picked library of DSP blocks. Explore our bass-focused effects, load neural models like NAM and AIDA-X, or sculpt your tone with genuine cabinet impulse responses, all delivered with minimal latency.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCurated DSP library\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAmps and Cabs: Explore a curated selection of classic and modern bass amps alongside bass and guitar cabinet simulations.\u003c\/li\u003e\n\u003cli\u003eOverdrive \u0026amp; Distortion: Access Darkglass's renowned drive circuits and authentic distortion captures.\u003c\/li\u003e\n\u003cli\u003eEQ, Filters \u0026amp; Dynamics: Sculpt your sound with equalizers, envelope filters, compressors, and noise gates.\u003c\/li\u003e\n\u003cli\u003eModulation \u0026amp; Pitch: Add movement with flangers and choruses and explore tonal heights with octavers and pitch shifters.\u003c\/li\u003e\n\u003cli\u003eDelays \u0026amp; Reverbs: Add depth with digital or analog delay effects, or choose from our selection of reverbs.\u003c\/li\u003e\n\u003cli\u003eUtilities \u0026amp; Loaders: Manage your routing and signal flow with handy utilities and system blocks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEssential Tools\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLooper: With one-touch control, start, stop, and overdub without interrupting your creativity. Your loops run independently of presets, switch tones without stopping playback!\u003c\/li\u003e\n\u003cli\u003eTuner\/Tempo: Tune your bass with precision, then set your global tempo without skipping a beat. Keep your delays locked to the groove. Turn the knob to set BPM between 40 and 300.\u003c\/li\u003e\n\u003cli\u003eMixer: Set levels for line outs, XLRs and headphones output, all from a single view. Fine-tune your overall tone with the Global EQ and add clarity across your entire rig.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePerformance simplified.\u003c\/strong\u003e\u003cbr\u003eAnagram's preset system captures every detail of your setup—from signal chain and block settings to footswitch assignments and scenes. Switch between intuitive views to inspect your chain, edit control bindings, or rename your presets. Then choose a mode to let your footswitches navigate setups, toggle individual effects, or jump between scenes.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDarkglass Suite Integration.\u003c\/strong\u003e\u003cbr\u003eConnect to the Darkglass Suite to upload and manage Cabinet IRs and neural models, refine presets and banks, and share or download via the Preset Hub. Keep your Anagram updated and ready to play!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003cbr\u003eInput: The primary input for connecting an instrument or the output from a pedalboard via a 1\/4\" mono jack.\u003cbr\u003e\u003cbr\u003eSend (Insert): A dual-function 1\/4\" jack that supports either a stereo send or a mono insert, allowing for the creation of an effects loop.\u003cbr\u003e\u003cbr\u003eReturn (Exp): A dual-function 1\/4\" jack that supports either a stereo return or an expression pedal input.\u003cbr\u003e\u003cbr\u003eHeadphone Output: A 3.5mm stereo headphone jack featuring three adjustable gain levels, ensuring optimal volume and clarity for any pair of headphones.\u003cbr\u003e\u003cbr\u003eMain Outputs: Two 1\/4\" outputs and two XLR outputs with the latter featuring an integrated, software-controlled ground lift. These outputs allow for stereo effects, split wet\/dry signals, or multiple amplifier connections, delivering an immersive sonic experience.\u003cbr\u003e\u003cbr\u003eUSB-C Port: The USB-C port enables Anagram's USB audio interface capabilities and allows interaction with the Darkglass Suite app for software updates and access to the Darkglass library. USB MIDI is also supported. Additionally, Anagram can be powered using a USB-C power supply that supports Power Delivery (PD), such as compatible laptop chargers, phone chargers, or power banks.\u003cbr\u003e\u003cbr\u003eMIDI In: A 3.5mm TRS (Type A) jack for connecting an external MIDI controller.\u003cbr\u003e\u003cbr\u003eMIDI Out: A 3.5mm TRS (Type A) jack for sending MIDI data from Anagram.\u003cbr\u003e\u003cbr\u003e9V DC: Only use a regulated 9V DC adapter with a center-negative plug. Anagram includes a 9V DC power adapter.\u003c\/p\u003e","brand":"Darkglass Electronics","offers":[{"title":"Default Title","offer_id":47531396890802,"sku":"ACDARANAGRAM","price":1199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0084\/0659\/7712\/files\/d2bdkd7lu4tau5qibyfn.jpg?v=1779958464"}],"url":"https:\/\/www.citymusicannex.com\/collections\/darkglass-1.oembed","provider":"City Music Annex","version":"1.0","type":"link"}